Pramet

Milling & Lathing

CATEGORIES

Viewing 1 - 20 of 105 products
Compare selected 0/8
Display:
Price
(Price shown excludes GST)
Description
Part Details
Pramet SDQCR Series Lathe Tool Holder for Use with DCMT 11T3, 20mm Height, 107° Approach, 180mm Length
  • SGD364.35Each
Pramet SDQCR Series Lathe Tool Holder for Use with DCMT 11T3, 20mm Height, 107° Approach, 180mm Length
  • Lathe PartLathe Tool Holder
  • Approach Angle107°
  • SeriesSDQCR
  • For Use WithDCMT 11T3
  • Length180mm
See similar products in Lathe Tool Holders & Inserts
Pramet SDJCR Series Lathe Tool Holder for Use with DCMT 11T3, 16mm Height, 93° Approach, 100mm Length
  • SGD194.22Each
Pramet SDJCR Series Lathe Tool Holder for Use with DCMT 11T3, 16mm Height, 93° Approach, 100mm Length
  • Approach Angle93°
  • Lathe PartLathe Tool Holder
  • SeriesSDJCR
  • For Use WithDCMT 11T3
  • Length100mm
See similar products in Lathe Tool Holders & Inserts
Pramet SCLCR Series Lathe Tool Holder for Use with CC Inserts, 8mm Height, 95° Approach, 100mm Length
  • SGD316.06Each
Pramet SCLCR Series Lathe Tool Holder for Use with CC Inserts, 8mm Height, 95° Approach, 100mm Length
  • Approach Angle95°
  • Lathe PartLathe Tool Holder
  • SeriesSCLCR
  • For Use WithCC Inserts
  • Length100mm
See similar products in Lathe Tool Holders & Inserts
Pramet Pentagon Milling Insert 9mm Side Length, 5.5mm Bore Diameter
  • SGD323.411 Box of 10
Pramet Pentagon Milling Insert 9mm Side Length, 5.5mm Bore Diameter
  • TypeIndexable
  • ShapePentagon
  • Bore Diameter5.5mm
  • Side Length9mm
  • GradeM8345
See similar products in Milling Inserts
Pramet TNMG Series Lathe Insert for Use with MTJNR, 4.76mm Height, 93° Approach, 16.5mm Length
  • SGD140.011 Box of 10
Pramet TNMG Series Lathe Insert for Use with MTJNR, 4.76mm Height, 93° Approach, 16.5mm Length
  • Lathe PartLathe Insert
  • Approach Angle93°
  • SeriesTNMG
  • For Use WithMTJNR
  • Length16.5mm
See similar products in Lathe Tool Holders & Inserts
Pramet CCMT Series Lathe Insert for Use with SCLCR 06, 2.38mm Height, 95° Approach, 6.4mm Length
  • SGD106.371 Box of 10
Pramet CCMT Series Lathe Insert for Use with SCLCR 06, 2.38mm Height, 95° Approach, 6.4mm Length
  • Lathe PartLathe Insert
  • Approach Angle95°
  • SeriesCCMT
  • For Use WithSCLCR 06
  • Length6.4mm
See similar products in Lathe Tool Holders & Inserts
Pramet SCLCR/L Series Lathe Tool Holder for Use with CCMT 09T3, 16mm Height, 95° Approach, 150mm Length
  • SGD303.06Each
Pramet SCLCR/L Series Lathe Tool Holder for Use with CCMT 09T3, 16mm Height, 95° Approach, 150mm Length
  • Approach Angle95°
  • Lathe PartLathe Tool Holder
  • SeriesSCLCR/L
  • For Use WithCCMT 09T3
  • Length150mm
See similar products in Lathe Tool Holders & Inserts
Pramet CCMT Series Lathe Insert for Use with SCLCR 09, 3.97mm Height, 95° Approach, 9.7mm Length
  • SGD176.391 Box of 10
Pramet CCMT Series Lathe Insert for Use with SCLCR 09, 3.97mm Height, 95° Approach, 9.7mm Length
  • Approach Angle95°
  • Lathe PartLathe Insert
  • SeriesCCMT
  • For Use WithSCLCR 09
  • Length9.7mm
See similar products in Lathe Tool Holders & Inserts
Pramet End Mill, 25mm Cutter, 25 mm Shank, 80mm Cut
  • SGD607.31Each
Pramet End Mill, 25mm Cutter, 25 mm Shank, 80mm Cut
  • Cutter Diameter25mm
  • Cut Length80mm
  • Overall Length170 mm
  • Shank TypePlain
  • Shank Diameter25 mm
See similar products in End Mills
Pramet DCMT Series Lathe Insert for Use with SDJCR 11, 3.97mm Height, 93° Approach, 11.6mm Length
  • SGD206.961 Box of 10
Pramet DCMT Series Lathe Insert for Use with SDJCR 11, 3.97mm Height, 93° Approach, 11.6mm Length
  • Lathe PartLathe Insert
  • Approach Angle93°
  • SeriesDCMT
  • For Use WithSDJCR 11
  • Length11.6mm
See similar products in Lathe Tool Holders & Inserts
Pramet CNMG Series Lathe Insert for Use with DCLNR 12, 4.76mm Height, 95° Approach, 12.9mm Length
  • SGD220.111 Box of 10
Pramet CNMG Series Lathe Insert for Use with DCLNR 12, 4.76mm Height, 95° Approach, 12.9mm Length
  • Approach Angle95°
  • Lathe PartLathe Insert
  • SeriesCNMG
  • For Use WithDCLNR 12
  • Length12.9mm
See similar products in Lathe Tool Holders & Inserts
Pramet 19° Face Mill 52mm, Diameter, 4, Pieces
  • SGD873.47Each
Pramet 19° Face Mill 52mm, Diameter, 4, Pieces
  • Diameter52mm
  • Bore Size22mm
  • Number of Inserts4
  • Depth of Cut2mm
  • Number of Pieces4
See similar products in Face Mills
Pramet DTGNR Series Lathe Tool Holder for Use with TN/TNM Inserts, 20mm Height, 90° Approach, 125mm Length
  • SGD163.08Each
Pramet DTGNR Series Lathe Tool Holder for Use with TN/TNM Inserts, 20mm Height, 90° Approach, 125mm Length
  • Lathe PartLathe Tool Holder
  • Approach Angle90°
  • SeriesDTGNR
  • For Use WithTN/TNM Inserts
  • Length125mm
See similar products in Lathe Tool Holders & Inserts
Pramet 19° Face Mill 63mm, Diameter, 5, Pieces
  • SGD1,030.56Each
Pramet 19° Face Mill 63mm, Diameter, 5, Pieces
  • Diameter63mm
  • Bore Size22mm
  • Number of Inserts5
  • Depth of Cut2mm
  • Number of Pieces5
See similar products in Face Mills
Pramet PWLN(RL) INT Series Lathe Tool Holder for Use with WNMG 0604, 20mm Height, 95° Approach, 180mm Length
  • SGD415.61Each
Pramet PWLN(RL) INT Series Lathe Tool Holder for Use with WNMG 0604, 20mm Height, 95° Approach, 180mm Length
  • Lathe PartLathe Tool Holder
  • Approach Angle95°
  • SeriesPWLN(RL) INT
  • For Use WithWNMG 0604
  • Length180mm
See similar products in Lathe Tool Holders & Inserts
Pramet CCMT Series Lathe Insert for Use with SCLCR 09, 3.97mm Height, 95° Approach, 9.7mm Length
  • SGD170.991 Box of 10
Pramet CCMT Series Lathe Insert for Use with SCLCR 09, 3.97mm Height, 95° Approach, 9.7mm Length
  • Lathe PartLathe Insert
  • Approach Angle95°
  • SeriesCCMT
  • For Use WithSCLCR 09
  • Length9.7mm
See similar products in Lathe Tool Holders & Inserts
Pramet XLCFN Series Lathe Tool Holder for Use with LFMX Inserts, 32mm Height, 90° Approach, 150mm Length
  • SGD233.67Each
Pramet XLCFN Series Lathe Tool Holder for Use with LFMX Inserts, 32mm Height, 90° Approach, 150mm Length
  • Lathe PartLathe Tool Holder
  • Approach Angle90°
  • SeriesXLCFN
  • For Use WithLFMX Inserts
  • Length150mm
See similar products in Lathe Tool Holders & Inserts
Pramet 19° Face Mill 42mm, Diameter, 3, Pieces
  • SGD740.53Each
Pramet 19° Face Mill 42mm, Diameter, 3, Pieces
  • Diameter42mm
  • Bore Size16mm
  • Number of Inserts3
  • Depth of Cut2mm
  • Height40mm
See similar products in Face Mills
Pramet TNMG Series Lathe Insert for Use with MTJNR, 4.76mm Height, 93° Approach, 16.5mm Length
  • SGD189.371 Box of 10
Pramet TNMG Series Lathe Insert for Use with MTJNR, 4.76mm Height, 93° Approach, 16.5mm Length
  • Approach Angle93°
  • Lathe PartLathe Insert
  • SeriesTNMG
  • For Use WithMTJNR
  • Length16.5mm
See similar products in Lathe Tool Holders & Inserts
Pramet DCLNR Series Lathe Tool Holder for Use with CN/CNM Inserts, 25mm Height, 95° Approach, 150mm Length
  • SGD243.41Each
Pramet DCLNR Series Lathe Tool Holder for Use with CN/CNM Inserts, 25mm Height, 95° Approach, 150mm Length
  • Lathe PartLathe Tool Holder
  • Approach Angle95°
  • SeriesDCLNR
  • For Use WithCN/CNM Inserts
  • Length150mm
See similar products in Lathe Tool Holders & Inserts
Recently Searched
Frequently Asked Questions
Need help?
Call our Customer Services team on:
+65 6865 3433 (Tel)
Our Services
About RS
Hot Topics
Singapore contacts
+65 6865 3400
© RS Components Pte Ltd
133 CECIL STREET #14 - 01 KECK SENG TOWER SINGAPORE 069535
Payment options