Recently searched

    Bench Power Supplies & Sources

    This handy piece of equipment is used when a power source is required that can be set up on the workbench, with its own power cord and method of output connection. They're useful in electronics for applications such as testing circuits that need a power source at different voltages.

    Variable power supplies

    Bench power supplies are available in variable or fixed voltage. A variable power supply will offer the ability to adjust the output, be that voltage, resistance, current or power and is ideal where versatility is required in an application, such as circuit testing. Variable power supplies have a feature called Current Limiting so it will shut down or limit current to the maximum rating. They normally have controls to allow the change of current from zero to the specified maximum current which helps to protect components.

    Linear and switching power supplies

    Bench power supplies are available in two different designs:

    • Linear Power Supplies – electrical or ripple noise is lower and easier to contain. Linear power supplies are more suitable for powering sensitive circuitry and generate more heat, resulting in lower energy efficiency. Linear supplies are heavier because the 50 Hz or 60 Hz transformer and associated filters are physically larger.
    • Switching Power Supplies – normally a better option for portable applications and they are lighter and more compact units. Switch-mode power supplies start out the same way as Linear, rectifying and filtering AC line input voltage, however they "switch" the DC into high-frequency AC. Switching power supplies can also tolerate small losses of power without affecting output, unlike Linear power supplies and be more energy efficient.

    Choosing a Bench Power Supply

    Wondering how many channels you need? Will depend on how many supplies you want to use simultaneously, but at least two channels are normal practise for a bench power supply.

    • Energy efficiency – normally detailed in the specifications or supplier's datasheet.
    • Line Regulation – Expressed as a percentage, this shows change in the output voltage relative to changes in the input line voltage.
    • Load Regulation – is the measure to ensure that the output voltage is constant despite load variations. A good load regulation ensures that output voltage doesn't fluctuate when loads increase or are removed. This is important where test results cannot be repeated.

    826 Products showing for Bench Power Supplies & Sources

    1 of 42
    • RS Stock No. 175-7365
    Each
    SGD467.68
    • RS Stock No. 201-8211
    Each
    SGD702.11
    • RS Stock No. 175-7368
    Each
    SGD274.81
    • RS Stock No. 756-8828
    • Mfr. Part No. EA-PS 2384-05 B
    Each
    SGD1,195.15
    • RS Stock No. 187-3439
    • Mfr. Part No. E36234A
    Each
    SGD5,665.03
    • RS Stock No. 180-8785
    Each
    SGD594.28
    • RS Stock No. 667-7381
    • Mfr. Part No. E3645A
    Each
    SGD2,114.32
    • RS Stock No. 175-7366
    Each
    SGD542.75
    • RS Stock No. 287-3828
    • Mfr. Part No. PRC15
    Each
    SGD841.80
    • RS Stock No. 175-7367
    Each
    SGD185.76
    • RS Stock No. 122-5036
    Each
    SGD518.43
    • RS Stock No. 123-3579
    Each
    SGD609.36
    • RS Stock No. 123-3565
    Each
    SGD563.50
    • RS Stock No. 263-6741
    • Mfr. Part No. K149A
    Each
    SGD2,412.42
    • RS Stock No. 731-2842
    • Mfr. Part No. CPX400D
    Each
    SGD2,056.70
    • RS Stock No. 123-3577
    Each
    SGD609.36
    • RS Stock No. 804-0419
    • Mfr. Part No. CPX200DP
    Each
    SGD2,937.08
    • RS Stock No. 172-0984
    • Mfr. Part No. DC110/3/PWR
    Each
    SGD7,366.36
    • RS Stock No. 737-7186
    • Mfr. Part No. CPX400S
    Each
    SGD1,815.06
    • RS Stock No. 457-740
    • Mfr. Part No. PL303QMD
    Each
    SGD1,205.77
    Results per page