Weller Erem ESD Safe Oblique Cutters
- RS Stock No.:
- 239-4010
- Mfr. Part No.:
- 582E
- Manufacturer:
- Weller Erem
Stock check temporarily unavailable - call for stock availability
Price Each
SGD145.75
(exc. GST)
SGD158.87
(inc. GST)
Units | Per unit |
|---|---|
| 1 + | SGD145.75 |
- RS Stock No.:
- 239-4010
- Mfr. Part No.:
- 582E
- Manufacturer:
- Weller Erem
RoHS Status: Not Applicable
Angled Head Small
These electronics cutters manufactured from high quality machined tool steel. Cutters have a built-in internal stop and integral return spring to prevent blade overlapping and reduce operator fatigue. All cutters are supplied with soft grip foam rubber grips.
Model 582E is designed for PCB component lead cutting, NATO and UK MOD approved 5110-99-256 52 58
Model 593AE is designed for rear cutting of DIP leads and dense PCBs
Model 593AE is designed for rear cutting of DIP leads and dense PCBs
Applications:
Cable Cutters are tools designed with electricians in mind, but a reliable set of cable cutters should always be at hand. These tools are ideal for cutting and stripping wires of all shapes and sizes. Wire cutters feature ergonomic designs for comfort, confidence and safety of use. Speciality models are suitable for insulated wire cutting and use in Electrostatic Discharge (ESD) environments. Cable cutters are commonly used by:
• Electricians
• Gas engineers
• Telecommunication engineers
• Car mechanics
• DIY enthusiasts
• Electricians
• Gas engineers
• Telecommunication engineers
• Car mechanics
• DIY enthusiasts
Features and Benefits:
- Medium head size angle cutter
- Tip cutter – angled narrow head
- 20 awg wire and smaller and nickel ribbon .010-.303
- Series 500
- Flush cut – leaves a smaller tip at the end of the wire than a semi-flush cut
- ESD safe – can be used in areas where there may be a sudden flow of electrostatic discharge which can destroy sensitive electronic components
- Length: 115 mm
- Angle 40 degrees
- Length of cutting edges: 6 mm
- Head width: 11 mm
- Head thickness: 6 mm
- Head length: 26 mm
- Max. cutting capability – medium hardness: Ø 0.6 mm
- Max. cutting capability – copper wire: Ø 1.3 mm
- Weight: 68 g
FAQ:
What is the maximum cutting capacity?
The maximum cutting capacity for these cutters is 1.3 mm.
It is essential that you have the right wire cutter providing you with a clean cut through cable and wire. These wire cutters will cut cleanly and easily with the 1.3 mm cutting capacity. The cable and wire cutter are excellent for use on;
Copper wire
Aluminium wire
Steel wire
What is the maximum cutting capacity?
The maximum cutting capacity for these cutters is 1.3 mm.
It is essential that you have the right wire cutter providing you with a clean cut through cable and wire. These wire cutters will cut cleanly and easily with the 1.3 mm cutting capacity. The cable and wire cutter are excellent for use on;
Copper wire
Aluminium wire
Steel wire
Approvals
NATO; UK MOD Approved 5110-99-256 52 58
Attribute | Value |
|---|---|
| Cutter Type | Oblique Cutters |
| Materials Cut | Copper Wire, Hard Wire |
| Overall Length | 115 mm |
| ESD Safe | Yes |
| Maximum Cutting Capacity | 1.3mm |
| Cut Type | Flush |