Cutters

Cutters are handheld tools designed for cutting a variety different materials, such as wires, and other smaller objects potentially too small to be worked on by hand. Typically consisting of two levers connected closer to one end by a fulcrum, with the shorter end forming the jaw, cutters come in a variety of types and sizes. The three basic types are locking, adjustable and non-adjustable.

In order to ensure user comfort, most models of cutters will have insulated handles, allowing you to be protected whilst working and providing a firm and comfortable grip. In addition to standard insulation or cushioning, some cutters will be VDE-insulated to protect the user when working with electrical equipment.

What are cutters used for?

While the name may be fairly clear, some variations of cutters can also be used to perform other actions. For example, linesmans cutters also have a small flat section along the jaw for gripping objects as well as their cutting surface. The application will dictate which is the best type of cutter for you to use.

Types of Cutters

Used by professionals and DIYers alike to cut wires effectively, there are many types of cutters designed for specific applications:

  • Diagonal cutters, also known as side cutters or side cutter pliers, are ideal for gripping, splicing or cutting wires, as well as stripping wire insulation. They cut by indenting and wedging the wire apart and give a cleaner cut than using a knife or scissors.
  • End cutters are also known as nippers and are used to cut through wire, springs, nails, bolts and rivets. They have an almost flat-bladed head, which allows for a cut close against the surface without digging into it.
  • Wire rope cutters are used for the clean shearing of wire rope without fanning. The jaws pull the wire rope into them and trap the cable before performing a clean cut.
  • Snipe nose or needle nose cutters are designed to hold fine objects and cut them cleanly without applying pressure to the wider area, which larger cutters may do and cause damage.
  • Cable cutters or wire cutters are most commonly used in electrical applications and are designed specifically to be used with cables and wires. While most have some form of covered handle for user comfort, it is important not to confuse plastic or rubber coatings with electrical insulation.
  • Linesmans cutters are popular in communications and electrical tasks. They have a short gripping surface toward the tip of the jaw, and a cutting surface extends back to the fulcrum. They are ideal for cutting leads or stripping insulation.

For more information on cutters, cutter types and best practices, read our comprehensive guide here.


...
Read more Read less

Filters

Viewing 1 - 20 of 582 products
Results per page
Description Price Model Number Non Sparking Type Overall Length Jaw Length VDE/1000V Approved Height Safe ESD Safe Material Maximum Cutting Capacity Cutting Capacity Copper Wire Cutting Capacity Ductile Wire Cutting Capacity Iron Wire
RS Stock No. 606-490
BrandRS PRO
SGD33.08
Each
units
- - Electronic Cutters 138 mm - - - - - 1.3mm 1.3mm - -
RS Stock No. 222-2583
Mfr. Part No.95 31 250
BrandKnipex
SGD389.61
Each
units
- - Ratchet Cable Cutter 250 mm - - - - - 32.0mm - - -
RS Stock No. 548-164
BrandRS PRO
SGD29.86
Each
units
- - Angle Cutters 130 mm - - - - - 0.8mm - - -
RS Stock No. 847-3784
BrandRS PRO
SGD34.22
Each
units
- - Electronic Cutters 114 mm - - - - Chrome Vanadium Steel - - - -
RS Stock No. 158-5338
Mfr. Part No.70 06 160
BrandKnipex
SGD49.82
Each
units
- - Side Cutters 160 mm - - - - - - - - -
RS Stock No. 614-766
Mfr. Part No.8160
BrandLindstrom
SGD129.73
Each
units
- - Diagonal Cutters 125 mm - - - Yes - 2.0mm - - -
RS Stock No. 248-1940
Mfr. Part No.74 01 200
BrandKnipex
SGD62.87
Each
units
- - Diagonal Cutter 200 mm - - - - - - - - -
RS Stock No. 497-007
BrandRS PRO
SGD55.60
Each
units
- - Diagonal 180 mm - Yes - - Steel 2.7mm - - -
RS Stock No. 541-6898
BrandRS PRO
SGD449.35
Each
units
- - Ratchet Cable Cutter 250 mm - - - - - 240.0mm - - -
RS Stock No. 487-094
BrandRS PRO
SGD39.82
Each
units
- - Diagonal Cutters 160 mm - - - - - 2.0mm - - -
RS Stock No. 536-420
BrandRS PRO
SGD9.91
Each
units
- - Diagonal Cutters 110 mm - - - - - 1.2mm - - -
RS Stock No. 161-170
BrandRS PRO
SGD45.09
Each
units
- - Diagonal Cutters 160 mm - - - - - 3.5mm - - -
RS Stock No. 297-1960
Mfr. Part No.70 07 160
BrandKnipex
SGD63.44
Each
units
- - Side Cutters 160 mm - - - - - - - - -
RS Stock No. 297-1982
Mfr. Part No.70 07 180
BrandKnipex
SGD70.15
Each
units
- - - - - - - - - - - - -
RS Stock No. 847-2951
BrandRS PRO
SGD44.43
Each
units
- - Electronic Cutters 148 mm 24.0mm - - Yes - 2.0mm - - -
RS Stock No. 487-242
BrandRS PRO
SGD34.19
Each
units
- - Diagonal Cutters 127 mm - - - - - 1.6mm - - -
RS Stock No. 158-5417
Mfr. Part No.95 16 165
BrandKnipex
SGD77.00
Each
units
- - Flush Cutters 165 mm - Yes - - - 15.0mm - - -
RS Stock No. 359-4687
Mfr. Part No.2101G-125
BrandBahco
SGD64.03
Each
units
- - Side Cutters 125 mm - - - - - 3.5mm - - -
RS Stock No. 864-0805
BrandRS PRO
SGD25.69
Each
units
- - Electronic Cutters 127 mm - - - Yes HCS - - - -
RS Stock No. 450-3963
BrandRS PRO
SGD73.89
Each
units
- - Straight Cutters 190 mm - - - - - - - - -