Lathe tool holders are used to secure lathe tools in place during a range of processes, including facing, threading and boring. Lathes are devices used in areas like metalworking to rotate a workpiece. Tool holders usually attach to lathes through the toolpost. Though most lathes support tool holders, not all do. Check your lathe is compatible before choosing one.
What are the advantages of lathe tool holders?
Lathe tool holders are usually made from a tougher material than the tool itself, meaning they can effectively support a precision cutting implement. They also offer flexibility and extended functionality. They can control the angle of the tool, extend or retract it as necessary or be spring-loaded to deflect the tool if too much force is applied.
Why use lathe tool holders?
There are several additional ways in which lathe tool holders allow a greater range of use of tool bits.
They can change the angle of the tool bit.
They can change the level of overhang in the tool bit.
They can direct fluid to the work area.
They may deflect the tool bit away from the piece when an excessive load is added.
Description:
RS Pro External Dead Centres, used to support
the workpiece at either the fixed or rotating end of the machine. The tips of the centres have an insert of carbide which reduces the friction and allow for faster speeds. ...
Description:
This shank cutter set is for chamfering holes
or component profiles, suitable for a wide range of materials. Containing holder and 10 TCMT inserts providing 3 cutting edges for improved economy. Capable of chamfering holes in one action from 11 ...
Description:
For general external turning operations. D style holder
incorporates top clamp for increased security. This kit is supplied with 10 x T7325 MT-CVD coated inserts with NMR Chipbreaker. Suitable for roughing machining operations in stainless steel. T7325 MT-CVD coated ...
Description:
SCLCR Tool kit for internal turning of bores
down to 11 mm in diameter. All 3 bars in this kit take the same insert and are suitable for use on a wide range of materials. With cutting depth of 1.5 ...