Lathe Tool Holders & Inserts

Lathe tool holders are used to secure lathe tools in place during a range of processes, including facing, threading and boring. Lathes are devices used in areas like metalworking to rotate a workpiece. Tool holders usually attach to lathes through the toolpost. Though most lathes support tool holders, not all do. Check your lathe is compatible before choosing one.


What are the advantages of lathe tool holders?


Lathe tool holders are usually made from a tougher material than the tool itself, meaning they can effectively support a precision cutting implement. They also offer flexibility and extended functionality. They can control the angle of the tool, extend or retract it as necessary or be spring-loaded to deflect the tool if too much force is applied.


Why use lathe tool holders?


There are several additional ways in which lathe tool holders allow a greater range of use of tool bits.



  • They can change the angle of the tool bit.

  • They can change the level of overhang in the tool bit.

  • They can direct fluid to the work area.

  • They may deflect the tool bit away from the piece when an excessive load is added.

...
Read more Read less

Filters

Viewing 41 - 60 of 84 products
Results per page
Description Price Approach Angle Lathe Part Series For Use With Length Height
RS Stock No. 866-0568
Mfr. Part No.KV 5X70
BrandPramet
SGD6.89
Each
units
- - - Grooving Insert - -
RS Stock No. 866-0540
Mfr. Part No.DCMT 070204E-FM:T8330
BrandPramet
SGD109.13
1 Box of 10
Box(es)
- Lathe Insert - - 7.8mm 2.38mm
RS Stock No. 866-0414
Mfr. Part No.DNMG 110404E-FM:T9315
BrandPramet
SGD209.53
1 Box of 10
Box(es)
- Lathe Insert - - 11.6mm 4.76mm
RS Stock No. 136-8719
Mfr. Part No.TN 16ER175M:T8030
BrandPramet
SGD37.04
Each (In a Pack of 5)
units
- Lathe Insert - - - 0.137mm
RS Stock No. 136-8715
Mfr. Part No.TN 16ER100M:T8030
BrandPramet
SGD32.63
Each (In a Pack of 5)
units
- Lathe Insert - - - 0.137mm
RS Stock No. 866-0565
Mfr. Part No.26-DU 2020
BrandPramet
SGD414.91
Each
units
- Lathe Tool Holder - - - -
RS Stock No. 866-0411
Mfr. Part No.CCMT 060202E-FM:T9325
BrandPramet
SGD144.28
1 Box of 10
Box(es)
- Lathe Insert - - 6.4mm 2.38mm
RS Stock No. 136-3984
Mfr. Part No.CNMG 120408E-M:T8330
BrandPramet
SGD19.329
Each (In a Pack of 10)
units
- Lathe Insert - - 12.9mm 4.76mm
RS Stock No. 866-0464
Mfr. Part No.DCMT 11T304E-FM:T9325
BrandPramet
SGD182.60
1 Box of 10
Box(es)
- Lathe Insert - - 11.6mm 3.97mm
RS Stock No. 866-0382
Mfr. Part No.WNMG 060408E-M:T9325
BrandPramet
SGD177.83
1 Box of 10
Box(es)
- Lathe Insert - - 6.5mm 4.76mm
RS Stock No. 866-0470
Mfr. Part No.DCMT 11T308E-FM:T9315
BrandPramet
SGD147.42
1 Box of 10
Box(es)
- Lathe Insert - - 11.6mm 3.97mm
RS Stock No. 866-0559
Mfr. Part No.DCMT 11T308E-FF:T8330
BrandPramet
SGD182.60
1 Box of 10
Box(es)
- Lathe Insert - - 11.6mm 3.97mm
RS Stock No. 136-3972
Mfr. Part No.LFMX 3.1-.20TNF2:T8330 (X10)
BrandPramet
SGD21.251
Each (In a Pack of 10)
units
- Lathe Parting Off Insert - - - -
RS Stock No. 866-0394
Mfr. Part No.WNMG 060412E-NM:T9325
BrandPramet
SGD177.83
1 Box of 10
Box(es)
- Lathe Insert - - 6.5mm 4.76mm
RS Stock No. 866-0445
Mfr. Part No.CCMT 09T308E-FM:T9315
BrandPramet
SGD155.60
1 Box of 10
Box(es)
- Lathe Insert - - 9.7mm 3.97mm
RS Stock No. 866-0483
Mfr. Part No.CNMG 120404E-FM:T9315
BrandPramet
SGD195.82
1 Box of 10
Box(es)
- Lathe Insert - - 12.9mm 4.76mm
RS Stock No. 866-0530
Mfr. Part No.CCMT 060208E-FM:T8330
BrandPramet
SGD135.28
1 Box of 10
Box(es)
- Lathe Insert - - 6.4mm 2.38mm
RS Stock No. 866-0477
Mfr. Part No.CNMG 120408E-FM:T9325
BrandPramet
SGD195.82
1 Box of 10
Box(es)
- Lathe Insert - - 12.9mm 4.76mm
RS Stock No. 866-0388
Mfr. Part No.WNMG 060404E-FM:T9325
BrandPramet
SGD177.83
1 Box of 10
Box(es)
- Lathe Insert - - 6.5mm 4.76mm
RS Stock No. 866-0473
Mfr. Part No.CNMG 120404E-FM:T9325
BrandPramet
SGD195.82
1 Box of 10
Box(es)
- Lathe Insert - - 12.9mm 4.76mm
Related Products
LFMX Parting & Grooving Insert for use with ...
Description:
LFMX Parting & Grooving Insert for use with XLCFN Blades. Excellent for machining Steel, Stainless Steel and Cast IronAcceptable for Super Alloys.
Threading inserts for productive, economic threading in mass ...
Description:
Threading inserts for productive, economic threading in mass production. These carbide indexable cutter inserts are easy to use and practical for large numbers of threading profiles. Provide a better surface finish to that of thread milling tools. Available in different ...
Parting & Grooving Blade For LCM Style Inserts. ...
Description:
Parting & Grooving Blade For LCM Style Inserts. For radial parting and grooving applicationsAvailable with single edge inserts for production of deeper groovesBack stop incorporated within insert for improved depth controlSuitable for LFMX Inserts.
LFMX Parting & Grooving Insert for use with ...
Description:
LFMX Parting & Grooving Insert for use with XLCFN Blades. Excellent for machining Steel, Stainless Steel and Cast IronAcceptable for Super Alloys.