Lathe Tool Holders & Inserts

Lathe tool holders are used to secure lathe tools in place during a range of processes, including facing, threading and boring. Lathes are devices used in areas like metalworking to rotate a workpiece. Tool holders usually attach to lathes through the toolpost. Though most lathes support tool holders, not all do. Check your lathe is compatible before choosing one.


What are the advantages of lathe tool holders?


Lathe tool holders are usually made from a tougher material than the tool itself, meaning they can effectively support a precision cutting implement. They also offer flexibility and extended functionality. They can control the angle of the tool, extend or retract it as necessary or be spring-loaded to deflect the tool if too much force is applied.


Why use lathe tool holders?


There are several additional ways in which lathe tool holders allow a greater range of use of tool bits.



  • They can change the angle of the tool bit.

  • They can change the level of overhang in the tool bit.

  • They can direct fluid to the work area.

  • They may deflect the tool bit away from the piece when an excessive load is added.

...
Read more Read less

Filters

Viewing 21 - 40 of 81 products
Results per page
Description Price Approach Angle Lathe Part Series For Use With Length Height
RS Stock No. 866-0528
Mfr. Part No.CCMT 060202E-FF:T8330
BrandPramet
SGD144.28
1 Box of 10
Box(es)
95° Lathe Insert CCMT SCLCR 06 6.4mm 2.38mm
RS Stock No. 866-0338
Mfr. Part No.DTGNR 2020 K 16
BrandPramet
SGD207.14
Each
units
90° Lathe Tool Holder DTGN(RL) EXT TNMG 1604 125mm 20mm
RS Stock No. 866-0363
Mfr. Part No.XLCFN 3201 M 2.00
BrandPramet
SGD207.84
Each
units
90° Lathe Tool Holder XLCFN B LFMX 2.2- 150mm 32mm
RS Stock No. 866-0499
Mfr. Part No.TNMG 160404E-FM:T9325
BrandPramet
SGD171.21
1 Box of 10
Box(es)
93° Lathe Insert TNMG MTJNR 16.5mm 4.76mm
RS Stock No. 866-0489
Mfr. Part No.CNMG 120408E-M:T9335
BrandPramet
SGD195.82
1 Box of 10
Box(es)
95° Lathe Insert CNMG DCLNR 12 12.9mm 4.76mm
RS Stock No. 866-0509
Mfr. Part No.TNMG 160408E-M:T9325
BrandPramet
SGD171.21
1 Box of 10
Box(es)
93° Lathe Insert TNMG MTJNR 16.5mm 4.76mm
RS Stock No. 866-0408
Mfr. Part No.PWLNR 2525 M 0604
BrandPramet
SGD218.43
Each
units
95° Lathe Tool Holder PWLN(RL) EXT WNMG 0604 150mm 25mm
RS Stock No. 866-0385
Mfr. Part No.WNMG 060404E-FM:T9315
BrandPramet
SGD177.83
1 Box of 10
Box(es)
93° Lathe Insert WNMG PWLNR 0604 6.5mm 4.76mm
RS Stock No. 866-0445
Mfr. Part No.CCMT 09T308E-FM:T9315
BrandPramet
SGD155.60
1 Box of 10
Box(es)
95° Lathe Insert CCMT SCLCR 09 9.7mm 3.97mm
RS Stock No. 866-0388
Mfr. Part No.WNMG 060404E-FM:T9325
BrandPramet
SGD177.83
1 Box of 10
Box(es)
93° Lathe Insert WNMG PWLNR 0604 6.5mm 4.76mm
RS Stock No. 866-0568
Mfr. Part No.KV 5X70
BrandPramet
SGD6.89
Each
units
- Lathe Insert Removal Key LFMX Grooving Insert - -
RS Stock No. 136-3966
Mfr. Part No.TCMT 16T308E-FM:T8330
BrandPramet
SGD18.981
Each (In a Pack of 10)
units
- Lathe Insert TCMT - 16.5mm 3.97mm
RS Stock No. 866-0451
Mfr. Part No.DCMT 070204E-FM:T9315
BrandPramet
SGD135.28
1 Box of 10
Box(es)
93° Lathe Insert DCMT - 7.8mm 2.38mm
RS Stock No. 866-0524
Mfr. Part No.TPMR 160308E-61:T9325
BrandPramet
SGD167.45
1 Box of 10
Box(es)
- Lathe Insert TPMR - 16.5mm 3.18mm
RS Stock No. 866-0417
Mfr. Part No.DNMG 110408E-M:T9325
BrandPramet
SGD209.53
1 Box of 10
Box(es)
93° Lathe Insert DNMG - 11.6mm 4.76mm
RS Stock No. 866-0391
Mfr. Part No.WNMG 060408E-M:T9335
BrandPramet
SGD177.83
1 Box of 10
Box(es)
93° Lathe Insert WNMG PWLNR 0604 6.5mm 4.76mm
RS Stock No. 866-0537
Mfr. Part No.CCMT 060204E-FF:T8330
BrandPramet
SGD135.28
1 Box of 10
Box(es)
95° Lathe Insert CCMT SCLCR 06 6.4mm 2.38mm
RS Stock No. 866-0483
Mfr. Part No.CNMG 120404E-FM:T9315
BrandPramet
SGD195.82
1 Box of 10
Box(es)
95° Lathe Insert CNMG DCLNR 12 12.9mm 4.76mm
RS Stock No. 136-8720
Mfr. Part No.TN 16ER200M:T8030
BrandPramet
SGD37.04
Each (In a Pack of 5)
units
90° Lathe Insert TN M EXT - 16.5mm 3.47mm
RS Stock No. 866-0521
Mfr. Part No.TPMR 160308E-47:T9325
BrandPramet
SGD167.45
1 Box of 10
Box(es)
- Lathe Insert TPMR - 16.5mm 3.18mm
Related Products
TCMT inserts provide 3 cutting edges for improved ...
Description:
TCMT inserts provide 3 cutting edges for improved economy. Suitable for chamfering in a wide range of materials. Higher Number = Tougher / Resistant to ImpactLower Number = Harder / Wear Resistant.
Threading inserts for productive, economic threading in mass ...
Description:
Threading inserts for productive, economic threading in mass production. These carbide indexable cutter inserts are easy to use and practical for large numbers of threading profiles. Provide a better surface finish to that of thread milling tools. Available in different ...
Parting & Grooving Blade For LCM Style Inserts. ...
Description:
Parting & Grooving Blade For LCM Style Inserts. For radial parting and grooving applicationsAvailable with single edge inserts for production of deeper groovesBack stop incorporated within insert for improved depth controlSuitable for LFMX Inserts.
WNMG Negative Turning Insert for use with DWLN ...
Description:
WNMG Negative Turning Insert for use with DWLN and PWLN Holders and Bars. Excellent for machining SteelAcceptable for Cast Iron and Hardened Steels.