Microchip TCN75 Series Temperature, Surface Mount, 2 Wire Serial, 0.5 °C, 8-Pin SOIC
- RS Stock No.:
- 236-8959P
- Mfr. Part No.:
- TCN75-3.3MOA
- Manufacturer:
- Microchip
This image is representative of the product range
Bulk discount available
Subtotal 10 units (supplied in a tube)*
SGD22.40
(exc. GST)
SGD24.40
(inc. GST)
Stock information currently inaccessible - Please check back later
Units | Per unit |
|---|---|
| 10 - 20 | SGD2.24 |
| 25 - 45 | SGD2.064 |
| 50 - 70 | SGD2.024 |
| 75 + | SGD1.984 |
*price indicative
- RS Stock No.:
- 236-8959P
- Mfr. Part No.:
- TCN75-3.3MOA
- Manufacturer:
- Microchip
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Microchip | |
| Product Type | Temperature | |
| Sub Type | Temperature | |
| Interface Type | 2 Wire Serial | |
| Accuracy | 0.5 °C | |
| Mount Type | Surface | |
| Pin Count | 8 | |
| Maximum Operating Temperature | 125°C | |
| Minimum Operating Temperature | -55°C | |
| Minimum Supply Voltage | 2.7V | |
| Maximum Supply Voltage | 5.5V | |
| Package Type | SOIC | |
| Length | 5mm | |
| Standards/Approvals | RoHS | |
| Series | TCN75 | |
| Height | 1.1mm | |
| Automotive Standard | No | |
| Select all | ||
|---|---|---|
Brand Microchip | ||
Product Type Temperature | ||
Sub Type Temperature | ||
Interface Type 2 Wire Serial | ||
Accuracy 0.5 °C | ||
Mount Type Surface | ||
Pin Count 8 | ||
Maximum Operating Temperature 125°C | ||
Minimum Operating Temperature -55°C | ||
Minimum Supply Voltage 2.7V | ||
Maximum Supply Voltage 5.5V | ||
Package Type SOIC | ||
Length 5mm | ||
Standards/Approvals RoHS | ||
Series TCN75 | ||
Height 1.1mm | ||
Automotive Standard No | ||
The Microchip TCN75 series serially programmable temperature sensor notifies the host controller when ambient temperature exceeds a user programmed set point. Hysteresis is also programmable. The INT/CMPTR output is programmable as either a simple comparator for thermostat operation or as a temperature event interrupt. Communication with the TCN75 is accomplished via a two-wire bus that is compatible with industry standard protocols. This permits reading the current temperature, programming the set point and hysteresis, and configuring the device.
Solid state temperature sensing 0.5°C accuracy typical
Operates from -55 °C to +125 °C
Operating supply range 2.7 V to 5.5 V
Programmable trip point and hysteresis with power-up defaults
Standard 2-Wire serial interface
Thermal event alarm output functions as interrupt or comparator/thermostat output
Up to 8 TCN75s may share the same bus
Shutdown mode for low standby power consumption
5V Tolerant I/O at VDD = 3V
Low power 250 micro A typical operating