Wurth Elektronik M2.5 Spacer Stud, 5 mm Body, 6 mm Stud, Brass

This spacer stud is a dual‑gender hex standoff designed for mechanical separation and secure fastening in electronic assemblies. Machined from brass with a nickel plating, it provides corrosion resistance and conductive continuity where required. The component features M2.5 threading on both ends and a through bore to accept clearance or fastener engagement, making it suitable for stacked board assemblies and chassis mounting in controlled environments.

• Hexagonal form permits standard spanner tightening for torque control
• Nickel surface reduces oxidation and maintains conductivity
• Dual M2.5 threads enable reversible male/female interconnection
• Documented compliance supports material safety in production

• Suitable for stacked PCB separation in Compact assemblies
• Used with chassis fixings where conductive spacers are required
• Ideal for insulated board mounting with mechanical support
• Can be used for prototype fixtures requiring frequent disassembly

The internal bore extends to a depth of 3mm to accept short threaded engagement or clearance fittings.

The 5mm across‑flat hex profile allows use of standard spanners to apply controlled torque when tightening or loosening.

Both ends are fitted with M2.5 threads to accommodate M2.5 screws and complementary fasteners.

The component is formed from brass and finished with a nickel plating for surface protection.

The stud projects 6mm from the base Interface for mechanical clearance planning.