Honeywell Technologies ABPMRRV001PD2A3 Pressure SensorBoard 6 SMT

This differential pressure sensor provides ratiometric analogue or 12-bit digital outputs to measure gage and differential pressures in electronic systems. It is a board-mounted, six-pin device designed for use with dry gases or, with an optional gel coating, non-corrosive liquids and condensation-prone environments. The sensor includes on-board compensation and calibration to maintain measurement performance across its compensated temperature range and offers configuration options such as sleep mode and internal diagnostics.

• ±0.25% accuracy improves measurement resolution and calibration
• ±0.25% long-term stability minimises drift over time
• Total Error Band ±1.5%FSS defines worst-case deviation
• 3.3V or 5V supply supports low-voltage system designs
• Update rates up to 2kHz digital enable fast response
• Liquid-media option permits wet/wet differential sensing

• Used for ventilators and patient monitoring in medical settings
• Suitable for pneumatic control and valve position feedback
• Ideal for air‑pressure monitoring in HVAC systems
• Can be used for coffee makers and washing machine pressure control
• Used with CPAP and sleep‑apnoea equipment for flow sensing

Dry-gas versions accept non-corrosive, non-ionic gases, liquid-media versions have a silicone-based gel under port P1 and permit non-corrosive liquids and condensation exposure.

Outputs include ratiometric analogue and I2C or SPI-compatible 12-bit digital, with analogue update ∼1kHz and digital update ∼2kHz.

Storage and operation span -40°C to 85°C, humidity tolerance up to 95% RH non-condensing, and solder reflow conforms to J-STD-020E MSL2.

Overpressure and burst ratings vary by pressure range, consult range tables for port-specific overpressure and burst limits.

The product offers DIP, SMT or leadless SMT board mounting with single or dual ports including dual radial barbed options.