Infineon EVAL-M1-6ED2230-B1 IGBT Gate Driver for 6ED2230S12T, FP15R12W1T4 for Compressors, Industrial Drives

The EVAL-M1-6ED2230-B1 is a complete power evaluation board including a 1200 V three phase gate driver 6ED2230S12T and a EasyPIM™1B 1200 V three-phase module FP15R12W1T4. Designed for supporting motor drive applications with a power range up to 2 kW.

It provides AC and DC inputs as well as a 3-phase power output, offers a single emitter shunt for current sensing and a voltage divider for DC-link voltage measurement.

This power board is compatible with the iMOTION™ MADK (Modular Application Design Kit), such as Eval-M1- 099M-C for motor control.

Infineon Thin-Film-SOI technology

Fully operational to +1200 V

Integrated Ultra‐fast Bootstrap Diode and OCP

Floating channel designed for bootstrap operation

Output source/sink current capability +0.35 A/‐0.65 A

Tolerant to negative transient voltage up to -100 V (Pulse width is up 700 ns) given by SOI-technology

Undervoltage lockout for both channels

3.3 V, 5 V, and 15 V input logic compatible

Over current protection with ±5% ITRIP threshold

Fault reporting, automatic Fault clear and Enable function on the same pin (RFE)

Matched propagation delay for all channels

Integrated 460 ns deadtime protection

Shoot-through (cross-conduction) protection

1200 V, 15 A three phase input rectifier PIM (Power Integrated Modules) IGBT module

Fast TRENCHSTOP™ IGBT4, Emitter Controlled 4 diode and NTC

Low switching losses

VCEsat with positive temperature coefficient

Low VCEsat

Al2O3substrate with low thermal restistance

Compact design

Solder contact technology

Rugged mounting due to integrated mounting clamps

For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.