Recently searched

    Intelligent LED Solutions White LED Strip, 4000K Colour Temp

    RS Stock No.:
    773-3482
    Mfr. Part No.:
    ILF-SJ27-NW95-SC201.
    Manufacturer:
    Intelligent LED Solutions
    Intelligent LED Solutions

    This image is representative of the product range

    View all LED Strip Lights
    Discontinued product
    RS Stock No.:
    773-3482
    Mfr. Part No.:
    ILF-SJ27-NW95-SC201.
    Manufacturer:
    Intelligent LED Solutions

    Legislation and Compliance


    Product Details

    Stanley 3J 27 LED PowerFlood Arrays


    The Stanley 3J series of PowerFlood LED arrays, from Intelligent LED Solutions, are powerful and low profile. Featuring 27 Stanley 3J LEDs with a Colour Rendering Index (CRI) of 95 for excellent colour definition, 25 of the LEDs are used in the main light and the remaining 2 LEDs for emergency lighting. With Aluminium PCBs for optimum thermal management they can operate with drive currents up to 800mA and utilise industry standard connectors for simple Plug and Play connectivity. Stanley 3J PowerFlood LED arrays are suitable for a wide variety of applications including: General lighting of all types, Down-lighters, Floodlights, Square, double D, etc. fluorescent tube replacement, Domestic lighting, amenity lighting and architectural lighting.

    Each SJ27 PowerFlood LED array contains 27 Stanley Electric high reliability 3J series LEDs
    Beam angle: ±60°
    Up to 800mA LED drive current
    Up to 50,000 hour lifetime to 70% of original brightness
    25 LED in main light section
    2 Emergency LEDs built-in, these will interface with leading manufacturers' LED emergency lighting units
    PowerFlood board size (L x H x T): 180x180x7.1mm (including connectors)
    5mm clearance mounting holes allows installation with screws
    Connection with JST PH type connectors
    See datasheets for suitable heat sinks, power supplies and cables

    Warning

    PowerFlood LED arrays will overheat in operation if not attached to a suitable Heat Sink, over heating can cause failure or irreparable damage.
    Do not operate PowerFlood LED arrays with a power supply with unlimited current. Connection to constant voltage power supplies that are not current limited may cause the PowerFlood LED array to consume current above the specified maximum and cause failure or irreparable damage.


    Intelligent LED Solutions LED Modules - Floods

    Specifications

    AttributeValue
    LED ColoursWhite
    Colour Temperature4000K
    Typical Luminous Flux2295 lm
    SeriesStanley 3J Powerflood
    Discontinued product