Infineon IRS21094SPBF, 600 mA, 10 → 20V 14-Pin, 14 Lead SOIC

The Infineon half bridge driver are high voltage, high speed power MOSFET and IGBT drivers with dependent high- and low-side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard CMOS or LSTTL output, down to 3.3 V logic. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 600 V.

Floating gate driver designed for bootstrap operation
Fully operational to +600 V
Tolerant to negative transient voltage, dV/dt immune
Gate drive supply range from 10 V to 20 V
Under voltage lockout for both channels
33 V, 5 V, and 15 V logic input compatible
Cross-conduction prevention logic
Matched propagation delay for both channels
High-side output in phase with HIN input
Logic and power ground +/- 5 V offset
Programmable up to 5 μs with one external resistor
Lower di/dt gate driver for better noise immunity
Shutdown input turns off both channels

For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.