RS PRO 6bar Air Blow Gun, 1/4in Air Inlet (BSP)

Air powered clean up guns that can be converted into a vacuum or blow gun by unscrewing the rear of the gun, reversing the venturi unit and screwing the gun back together
The venturi/vortex action multiplies input and prevents risk of stalling
Constructed from hard wearing maintenance nylon 6 that is also oil resistant and chemically inert
1/4in BSP Inlet
Max working pressure 6 bar
Accessories available separately, not supplied with dustbag

Non-restricted type blow guns must only be used on air lines which have a pressure regulator set at a maximum of 30 psi.

To avoid risk of injury, these guns must only be used with either a suitable dust bag or conveying hose.
Always use approved eye protection when using these tools. Blow guns, unless correctly used, can prove dangerous; read instructions carefully.

RS PRO Blow / vacuum air gun is a versatile air gun that can be used as an air blow gun and then simply changed into a vacuum gun by unscrewing the back of the air gun, reversing the venture air gun tube and then screwing it all back together. The air gun low and vacuum assists you in removing metal chips, pellets, powders and debris from your work areas and machine beds. Any waste material is collected into a dust bag or can be transferred by use of a hose to a waste bin or drum. This is a tough hard-wearing model made from Nylon 6 abrasive resistant material all adding to this air blower / vacuums strength.

• Reversible Air Gun.
• Air blow or vacuum.
• Can be hand held or static site.
• No moving parts.
• Low air consumption.
• Made from Nylon 6 material.
• Abrasive resistant.
• Tough.
• Durable.
• Wide range of accessories.

• Remove and collect metal chips, pellets, dust, powders, granules, debris.

• Pressurised air supply.

• Stock number 806791 – Flared Air Nozzle.