Punches

Punch sets are ideal for punching neat holes in a variety of materials. Whether in textiles, woodworking or metalworking, a set of punch tools allows the operator to drive objects into the material, or form an impression on a workpiece. Sharp at one end, and hardened and flat at the other, a punch can be used with a hammer to achieve the desired results.


The RS range of punch sets includes several different types to suit your needs, from our own brand RS PRO and also well-known brands such as Bahco, Stanley, Gedore and Facom to name a few:


  • Centre Punch- A common type of punch with a semi blunted end. This is typically used to mark a centre for drilling in a piece. By creating a small recess for the drill bit to rest in, the drill is assured a greater chance of staying on course.
  • Drift Punch - Sometimes referred to as a pokey, this punching tool is often used for enlarging previously made holes. It can also be used for aligning holes prior to bolting.
  • Parallel Pin Punch - A parallel pin punch is often employed to remove pins from mechanical assemblies. When a pin is too tight to remove by hand, the correctly sized parallel pin punch can be employed to drive it loose.
  • Spring Pin Punch - Spring pin punches are used for removing roll pins, a type of mechanical fastener. For this reason, spring pin punches are also called roll pin punches and are specially shaped to remove roll pins without causing damage or becoming jammed.
  • Wad Punch - Have interchangeable heads and are used to cut accurate circles into textile materials. They can even be used on thin metal to make washers.
  • Anti-Vibration - With a shock-absorbing rubber handle, this punch not only offers the user maximum safety and comfort but also prevents clipping.

...
Read more Read less

Filters

Viewing 1 - 20 of 113 products
Results per page
Description Price Overall Length Shank Diameter Number of Pieces Point Angle Punch Type
RS Stock No. 505-8688
BrandRS PRO
SGD41.86
Each
units
150 mm - 6 - Parallel Pin
RS Stock No. 541-7223
BrandRS PRO
SGD45.24
Each
units
- 5 → 32 mm 10 - Wad
RS Stock No. 423-2627
BrandRS PRO
SGD17.48
1 Set
Set(s)
4 in - 3 - Centre
RS Stock No. 626-1497
BrandRS PRO
SGD44.01
Each
units
40 mm, 50 mm 2 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm 6 - Drift
RS Stock No. 460-9550
BrandRS PRO
SGD49.49
Each
units
130 mm 17 mm 1 - Automatic
RS Stock No. 600-896
BrandRS PRO
SGD51.04
1 Set
Set(s)
47 mm, 57 mm, 67 mm 2 → 5 mm 6 - Spring Pin
RS Stock No. 381-4896
BrandRS PRO
SGD21.40
1 Set
Set(s)
4 in 1.6 → 4 mm 5 - Centre
RS Stock No. 381-4903
BrandRS PRO
SGD61.82
1 Set
Set(s)
4 in 1/16 in, 1/4 in, 1/8 in, 3/16 in, 3/32 in, 5/16 in, 5/32 in, 7/32 in 8 - Parallel Pin
RS Stock No. 467-6623
BrandRS PRO
SGD4.30
Each
units
120 mm 10 mm 1 - Centre
RS Stock No. 467-6572
BrandRS PRO
SGD26.88
Each
units
- - 6 - -
RS Stock No. 668-5761
BrandRS PRO
SGD13.62
Each
units
200 mm 5 mm 1 - Pin
RS Stock No. 473-0698
BrandRS PRO
SGD4.49
Each
units
100 mm 8 mm 1 - Centre
RS Stock No. 473-0682
BrandRS PRO
SGD13.50
Each
units
35 mm 4 mm 1 - Replaceable
RS Stock No. 290-5109
BrandRS PRO
SGD36.38
Each
units
139 mm 3 mm 1 20° Automatic
RS Stock No. 701-0568
BrandRS PRO
SGD65.22
1 Set
Set(s)
Flat Chisel: 125; Cross Head Chisel: 125; Rivet Punch (x2): 120; Centre Punch: 125 mm 10 mm 5 - Anti-Vibration
RS Stock No. 668-5755
BrandRS PRO
SGD11.01
Each
units
185 mm 2.5 mm 1 - Centre
RS Stock No. 460-9544
BrandRS PRO
SGD53.06
Each
units
125 mm 14 mm 1 - Automatic
RS Stock No. 473-0711
BrandRS PRO
SGD7.29
Each
units
150 mm 14 mm 1 - Centre
RS Stock No. 456-3634
BrandRS PRO
SGD45.06
1 Set
Set(s)
Flat Cold Chisel: 150; Flat Cold Chisel: 125; Crosscut chisel: 125 mm Centre Punch: 4; Taper Punch: 3; Taper Punch: 4 mm 6 - Pin
RS Stock No. 381-4919
BrandRS PRO
SGD48.79
1 Set
Set(s)
205 mm 3.2 mm, 4.8 mm, 6.3 mm, 8 mm, 9.5 mm 5 - Parallel Pin
Related Products
For punching holes in thin sheet steel, aluminium ...
Description:
For punching holes in thin sheet steel, aluminium and brass up to 14 gauge (1.5mm)Tool develops up to 1 ton force7 punches from 3/32 " to 9/32 " in 1/32 stepsSupplied with die key & storage caseThroat depth of 1 ...
Since 1907 Proto® punchs and chisels are made ...
Description:
Since 1907 Proto® punchs and chisels are made from tough alloy steel and offer the Professional Advantage you need for top quality craftsmanship. Proto® punches and chisels are hardened quenched and tempered to precise specifications for durable hard tips and ...
Two hand operated centre punches which do not ...
Description:
Two hand operated centre punches which do not require a hammer to be used. Once positioned and pressed the punches make an impression to the depth set by a knurled impact adjusterThe tool resets when removed from the workpiece.Small and ...
Centre punches available in four sizes each with ...
Description:
Centre punches available in four sizes each with a chemically blackened knurled grip and a round head A fine machine ground point with a 90° chamfer, gives accurate centering on cross lines and makes well defined impression for drillingThe round ...