Recently searched

# Protractors

Protractors are among the simplest measuring instruments that you can find. A traditional protector would look like a semi-circle. However, you will also be able to purchase a 360-degree protector based on your needs. When you take a closer look at a protractor, you will be able to see markings on it, which range from 0° to 180°.Who can use a protector?A protractor is a mathematical instrument made from clear plastic used for measuring angles in degrees such as the angles of a triangle or a hexagon. Protractors are quite popular for numerous industrial applications. Depending on the nature of work you do, you need to purchase the right protector. In other words, you need to check what you are trying to do and then decide whether you are going to purchase a bevel protractor, metal protector, Vernier protractor, engineers protractor, or stainless steel protractor.

## Bevel Protractors

These are able to measure through 360° by using one or two swinging arms that can help measure the angle. The construction of a bevel protractor consists of a beam, graduated dial and a blade which is connected to a swivel plate by thumb nut and clamp. There are variants on this design including a universal precision protractor and precision universal Vernier protractor which have a more technical design. Bevel protractors are more accurate than regular protractors as they use a Vernier scale along with a fixed scale. The fixed dial or main scale has four sections with each one graduated from 0 ° to 90 °. The Vernier scale has 24 divisions with 12 divisions on either side of 0 with each division representing 5 minutes.

## Semi-Circular Protractor

This protractor has two sets of scales graduated up to 180° in opposite directions enabling angles to be read from two directions. On the base of the protractor is a midpoint mark that indicates the position of the highest point of the angle that is going to be measured or the vertex. The semi-circular protractor is used for reading, drawing, and plotting angles on paper or charts. This type of protractor is commonly used in classrooms for geometry and in mechanical and engineering-related applications.

## The Vernier Scale

This is used on protractors to enable them to give more precise and accurate measurements. There are 60 minutes in a degree and regular protractors have a scale graduated in degrees. In the Vernier scale, each graduation represents 5 minutes or 1/12 of a degree. The Vernier scale is found underneath the main degree scale and is spaced so it reads at a constant fraction of the fixed main scale.As with the regular protractor the Vernier scale is bidirectional and can be read to either side. Bevel protractors are designed for making for high precision measurements and are commonly used for producing mechanical and architectural drawings and by tool makers. Bevel protractors are often ground and made from stainless steel. Some protractors have a satin chrome finish to improve visibility of the scales.

## How to read a vernier protractor?

Using a protractor to measure an angle is quite easy. You will need to place the center hole of your protractor on top of the Vertex O. Then you need to keep the baseline on the ray that acts as the base of the angle. Then you should decide which readings you are going to consider. You can measure the angle from left hand side or the right hand side. Then you should be using the inner readings or outer readings accordingly.

Filters
Sort By
Page
1
of
0
per page
Page
1
of
0
per page