Splice Connectors

A splice connector consists of a plastic clip that has a sharp metal insert that will safely cut through the plastic insulating jackets of two wires and crimps them together. Splice Connectors are used to make quick splices or connections with two or more pieces of wire. These splices are normally crimped or soldered so that the power conducted from the source cable to the next cable is transferred at inacceptable conductivity and pull-out resistance performance level.


Types of splice connectors:


  • Crimp Butt Splice Terminal

  • Crimp Closed End Terminal

  • Crimp Barrel Foil Terminal

  • Push Wire Terminal

 


Frequently asked Questions


What are Crimp Butt Splice Terminals


Crimp butt splice terminals are tube-shaped connectors with two crimps for joining wires in-line. They typically consist of a metal tube that's usually encased in an insulated covering. Crimp butt splice terminals can be used to either change, lengthen or repair conductors in an electrical circuit.


How Do Crimp Butt Splice Terminals Work ?


Crimp butt splice terminals are attached by inserting the stripped ends of two stranded wires into both ends of the terminal. A crimping tool is then used to crimp both ends to ensure a tight connection between the wires.


What are Crimp Closed-End Connectors used for?


Crimp closed-end connectors are used to terminate wires as well as seal them from oxygen and moisture, which would otherwise cause corrosion. Terminators in electronic transmission lines prevent reflections that would occur at unterminated transmission lines, which can lead to distortions like video ghosting in analogue signal systems.


Crimp closed-end connectors come in a wide range of fixed sizes for wires of different diameters. There also are adjustable ones that provide more flexibility.


...
Read more Read less

Filters

Viewing 1 - 20 of 939 products
Results per page
Description Price Splice Type Minimum Wire Size mm² Wire Size Maximum Wire Size mm² Overall Length Diameter Minimum Wire Size AWG Insulation Maximum Wire Size AWG Number of Ways Colour Contact Dimensions Insulation Material Contact Length
RS Stock No. 534-648
BrandRS PRO
SGD0.20
Each (In a Pack of 100)
units
Butt 1.5mm² 16 → 14 AWG 2.5mm² 24.5mm 4.8mm 16AWG Insulated 14AWG - Blue - PVC -
RS Stock No. 534-288
BrandRS PRO
SGD0.178
Each (In a Pack of 100)
units
Butt 0.5mm² 22 → 16 AWG 1.5mm² 24.5mm 4mm 22AWG Insulated 16AWG - Red - PVC -
RS Stock No. 205-0710
BrandRS PRO
SGD0.225
Each (In a Pack of 100)
units
Closed End 1.5mm² 1 → 2.6 mm² 2.5mm² 21mm 7.4mm 16AWG Insulated 14AWG - Clear - Nylon -
RS Stock No. 613-9794
BrandRS PRO
SGD0.229
Each (In a Pack of 100)
units
Butt 0.5mm² 22 → 16 AWG 1.5mm² 24.2mm 4mm 22AWG Insulated 16AWG - Red - Vinyl -
RS Stock No. 239-3988
BrandRS PRO
SGD26.79
1 Box of 100
Box(es)
Butt - 26 → 19 AWG - - 2.08mm - Insulated - - Yellow - PP -
RS Stock No. 534-907
BrandRS PRO
SGD0.20
Each (In a Pack of 100)
units
Closed End 0.5mm² 0.5 → 1.5 mm² 1.5mm² 18.1mm 6.6mm 22AWG Insulated 16AWG - Clear - Nylon -
RS Stock No. 531-368
BrandRS PRO
SGD0.186
Each (In a Pack of 25)
units
T-Tap 0.75mm² 18 → 14 AWG 2.5mm² 37mm 9.8mm 18AWG Insulated 14AWG - Blue - Nylon -
RS Stock No. 119-211
BrandRS PRO
SGD0.479
Each (In a Pack of 10)
units
Butt - 25 mm² 25mm² 31mm 6.7mm - Uninsulated - - - - - -
RS Stock No. 510-5346
BrandRS PRO
SGD9.27
1 Bag of 50
Bag(s)
T-Tap 0.75mm² 18 → 14 AWG 2.5mm² 37mm 9.8mm 18AWG Insulated 14AWG - Blue - Nylon -
RS Stock No. 841-7677
BrandRS PRO
SGD0.344
Each (In a Pack of 100)
units
Butt - 16 mm² - 30mm 7.5mm - Uninsulated - - - - - -
RS Stock No. 613-9788
BrandRS PRO
SGD0.30
Each (In a Pack of 100)
units
Butt 1.5mm² 16 → 14 AWG 2.5mm² 24.2mm 4.5mm 16AWG Insulated 14AWG - Blue - Vinyl -
RS Stock No. 119-249
BrandRS PRO
SGD1.208
Each (In a Pack of 10)
units
Butt - 70 mm² 70mm² 43mm 12mm - Uninsulated - - - - - -
RS Stock No. 613-9766
BrandRS PRO
SGD0.375
Each (In a Pack of 100)
units
Butt 4mm² 12 → 10 AWG 6mm² 26mm 6.3mm 12AWG Insulated 10AWG - Yellow - Vinyl -
RS Stock No. 534-519
BrandRS PRO
SGD0.269
Each (In a Pack of 100)
units
Butt 4mm² 12 → 10 AWG 6mm² 24.5mm 5.8mm 12AWG Insulated 10AWG - Yellow - PVC -
RS Stock No. 809-2363
BrandRS PRO
SGD0.10
Each (In a Pack of 100)
units
Butt 0.5mm² 22 → 16 AWG 1.5mm² 15mm 3.3mm 22AWG Uninsulated 16AWG - - - - -
RS Stock No. 841-7670
BrandRS PRO
SGD0.167
Each (In a Pack of 100)
units
Butt - 6 mm² - 20mm 5.9mm - Uninsulated - - - - - -
RS Stock No. 510-4876
BrandRS PRO
SGD9.02
1 Bag of 50
Bag(s)
Tap 0.75mm² 18 → 14 AWG 2.5mm² 31mm 17.5mm 18AWG Insulated 14AWG - Blue - Nylon -
RS Stock No. 119-233
BrandRS PRO
SGD1.095
Each (In a Pack of 10)
units
Butt - 50 mm² 50mm² 40mm 9.6mm - Uninsulated - - - - - -
RS Stock No. 510-4832
BrandRS PRO
SGD6.51
1 Bag of 50
Bag(s)
T-Tap 0.5mm² 20 → 18 AWG 0.75mm² 37mm 9.8mm 22AWG Insulated 18AWG - Red - Nylon -
RS Stock No. 841-7673
BrandRS PRO
SGD0.235
Each (In a Pack of 100)
units
Butt - 10 mm² - 23mm 6.6mm - Uninsulated - - - - - -
Related Products
A range of discrete PCB through hole press-fit ...
Description:
A range of discrete PCB through hole press-fit miniature spring sockets for discrete wire. These discrete sockets are available with a closed bottom or open bottom sleeve style and a variety of lengths and plating options. Please see additional data ...
Discrete PCB reusable spring sockets with tin plated ...
Description:
Discrete PCB reusable spring sockets with tin plated closed bottom copper sleeves (apart from stock number 756-1035 which has an open bottom sleeve design). These reusable discrete PCB miniature spring sockets have gold plated contact springs. For hole size and ...
A range of discrete PCB through hole press-fit ...
Description:
A range of discrete PCB through hole press-fit miniature spring sockets for discrete wire. These discrete sockets are available with a closed bottom or open bottom sleeve style and a variety of lengths and plating options. Please see additional data ...
High current PCB mount power tap tab terminals ...
Description:
High current PCB mount power tap tab terminals for providing a high current separable connection to a PCB. These power tap terminals feature ACTION PIN contacts which provide a low resistance interface with the tin plated holes in the PCB ...