Splice Connectors

A splice connector consists of a plastic clip that has a sharp metal insert that will safely cut through the plastic insulating jackets of two wires and crimps them together. Splice Connectors are used to make quick splices or connections with two or more pieces of wire. These splices are normally crimped or soldered so that the power conducted from the source cable to the next cable is transferred at inacceptable conductivity and pull-out resistance performance level.


Types of splice connectors:


  • Crimp Butt Splice Terminal

  • Crimp Closed End Terminal

  • Crimp Barrel Foil Terminal

  • Push Wire Terminal

 


Frequently asked Questions


What are Crimp Butt Splice Terminals


Crimp butt splice terminals are tube-shaped connectors with two crimps for joining wires in-line. They typically consist of a metal tube that's usually encased in an insulated covering. Crimp butt splice terminals can be used to either change, lengthen or repair conductors in an electrical circuit.


How Do Crimp Butt Splice Terminals Work ?


Crimp butt splice terminals are attached by inserting the stripped ends of two stranded wires into both ends of the terminal. A crimping tool is then used to crimp both ends to ensure a tight connection between the wires.


What are Crimp Closed-End Connectors used for?


Crimp closed-end connectors are used to terminate wires as well as seal them from oxygen and moisture, which would otherwise cause corrosion. Terminators in electronic transmission lines prevent reflections that would occur at unterminated transmission lines, which can lead to distortions like video ghosting in analogue signal systems.


Crimp closed-end connectors come in a wide range of fixed sizes for wires of different diameters. There also are adjustable ones that provide more flexibility.


...
Read more Read less

Filters

Viewing 1 - 20 of 34 products
Results per page
Description Price Splice Type Minimum Wire Size mm² Wire Size Maximum Wire Size mm² Overall Length Diameter Minimum Wire Size AWG Insulation Maximum Wire Size AWG Number of Ways Colour Contact Dimensions Insulation Material Contact Length
RS Stock No. 838-8392
Mfr. Part No.CE-2
BrandJST
SGD0.174
Each (In a Pack of 100)
units
- - 1 → 3 mm², 16 → 14 AWG - 21mm - - Insulated - - - - Nylon -
RS Stock No. 165-7939
Mfr. Part No.CE-2
BrandJST
SGD145.76
1 Box of 1000
Box(es)
- - 1 → 3 mm², 16 → 14 AWG - 21mm - - Insulated - - - - Nylon -
RS Stock No. 166-7274
Mfr. Part No.C-5.5
BrandJST
SGD277.38
1 Box of 1000
Box(es)
Butt - 12 → 10 AWG, 2.63 → 6.64 mm² - 15mm 5.4mm - Uninsulated - - - - - -
RS Stock No. 838-8373
Mfr. Part No.C-5.5
BrandJST
SGD0.355
Each (In a Pack of 50)
units
Butt - 12 → 10 AWG, 2.63 → 6.64 mm² - 15mm 5.4mm - Uninsulated - - - - - -
RS Stock No. 838-8383
Mfr. Part No.CE-1
BrandJST
SGD0.171
Each (In a Pack of 100)
units
- - 0.5 → 1.75 mm², 22 → 16 AWG - 20.8mm - - Insulated - - - - Nylon -
RS Stock No. 165-7981
Mfr. Part No.CE-1
BrandJST
SGD148.49
1 Box of 1000
Box(es)
- - 0.5 → 1.75 mm², 22 → 16 AWG - 20.8mm - - Insulated - - - - Nylon -
RS Stock No. 166-7427
Mfr. Part No.FVC-1.25(LF)
BrandJST
SGD156.01
1 Box of 1000
Box(es)
Butt - 22 → 16 AWG - 22.7mm 4mm - Insulated - - Red - Nylon, Vinyl -
RS Stock No. 688-1035
Mfr. Part No.FVC-1.25(LF)
BrandJST
SGD0.193
Each (In a Pack of 100)
units
Butt - 22 → 16 AWG - 22.7mm 4mm - Insulated - - Red - Nylon, Vinyl -
RS Stock No. 165-7979
Mfr. Part No.2-SDW
BrandJST
SGD187.56
1 Box of 1000
Box(es)
- - 1.5 → 3 mm², 16 → 14 AWG - 17.1mm - - Insulated - - - - Nylon -
RS Stock No. 838-8409
Mfr. Part No.2-SDW
BrandJST
SGD0.198
Each (In a Pack of 100)
units
- - 1.5 → 3 mm², 16 → 14 AWG - 17.1mm - - Insulated - - - - Nylon -
RS Stock No. 688-1032
Mfr. Part No.FVC-5.5(LF)
BrandJST
SGD0.299
Each (In a Pack of 100)
units
Butt - 12 → 10 AWG - 26.7mm 6.8mm - Insulated - - Yellow - Nylon, Vinyl -
RS Stock No. 166-7544
Mfr. Part No.FVC-5.5(LF)
BrandJST
SGD0.268
Each (In a Box of 250)
units
Butt - 12 → 10 AWG - 26.7mm 6.8mm - Insulated - - Yellow - Nylon, Vinyl -
RS Stock No. 172-5018
Mfr. Part No.CL-2218S
BrandJST
SGD0.386
Each (In a Bag of 500)
units
Tap - 22 → 18 AWG - 20mm 13.8mm - Insulated - - Red - Nylon -
RS Stock No. 752-1927
Mfr. Part No.CL-2218S
BrandJST
SGD0.506
Each (In a Pack of 5)
units
Tap - 22 → 18 AWG - 20mm 13.8mm - Insulated - - Red - Nylon -
RS Stock No. 166-7404
Mfr. Part No.FVP-5.5
BrandJST
SGD0.353
Each (In a Box of 500)
units
Parallel - 12 → 10 AWG - 20.5mm - - Insulated - - - - Vinyl -
RS Stock No. 688-1158
Mfr. Part No.FVP-5.5
BrandJST
SGD0.307
Each (In a Pack of 100)
units
Parallel - 12 → 10 AWG - 20.5mm - - Insulated - - - - Vinyl -
RS Stock No. 838-8395
Mfr. Part No.CE-5
BrandJST
SGD0.371
Each (In a Pack of 50)
units
- - 12 → 10 AWG, 2.5 → 6 mm² - 27mm - - Insulated - - - - Nylon -
RS Stock No. 161-7864
Mfr. Part No.C-38
BrandJST
SGD2.952
Each (In a Box of 100)
units
Butt - 2 AWG, 26.66 → 42.42 mm² - 32mm 13.2mm - Uninsulated - - - - - -
RS Stock No. 688-1149
Mfr. Part No.FVP-2
BrandJST
SGD0.223
Each (In a Pack of 100)
units
Parallel - 16 → 14 AWG - 16mm - - Insulated - - - - Vinyl -
RS Stock No. 165-7960
Mfr. Part No.CE-5
BrandJST
SGD0.268
Each (In a Box of 500)
units
- - 12 → 10 AWG, 2.5 → 6 mm² - 27mm - - Insulated - - - - Nylon -