Infineon TLE94613ESXUMA1 System-On-Chip 24-Pin TSDSO-24

This image is representative of the product range

View all System-On-Chips
Bulk discount available

Subtotal (1 pack of 2 units)*

SGD8.88

(exc. GST)

SGD9.68

(inc. GST)

Add to Basket
Select or type quantity
Orders below SGD150.00 (exc. GST) cost SGD25.00.
In Stock
  • 2,888 unit(s) ready to ship from another location
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units
Per unit
Per Pack*
2 - 8SGD4.44SGD8.88
10 - 98SGD4.225SGD8.45
100 - 248SGD4.015SGD8.03
250 - 498SGD3.815SGD7.63
500 +SGD3.615SGD7.23

*price indicative

Packaging Options:
RS Stock No.:
244-2898
Mfr. Part No.:
TLE94613ESXUMA1
Manufacturer:
Infineon
Find similar products by selecting one or more attributes.
Select all

Brand

Infineon

Product Type

System-On-Chip

Mount Type

Surface

Package Type

TSDSO-24

Pin Count

24

Interface Type

LIN, CAN

Minimum Supply Voltage

-0.3V

Maximum Supply Voltage

28V

Minimum Operating Temperature

-55°C

Maximum Operating Temperature

150°C

Width

0.95 mm

Length

8.65mm

Series

TLE9461-3ES

Standards/Approvals

ISO 11898-2:2016, RoHS

Height

3.9mm

Automotive Standard

AEC-Q101, AEC-Q100

The Infineon TLE94613ESXUMA1 device is designed for various CAN automotive applications as main supply for the microcontroller and as interface for a CAN bus network including the CAN Partial Networking feature. To support these applications, the System Basis Chip (SBC) provides the main functions, such as a 5 V lowdropout voltage regulator (LDO) for e.g. a microcontroller supply, another 5 V low-dropout voltage regulator with off-board protection for e.g. sensor supply, a HS-CAN transceiver supporting CAN FD and CAN Partial Networking (incl. FD tolerant mode) for data transmission, a high-voltage GPIO with embedded protective functions and a 16-bit Serial Peripheral Interface (SPI) to control and monitor the device.

Fully compliant to “Hardware Requirements for LIN, CAN and FlexRay Interfaces in Automotive Applications” Revision 1.3, 2012-05-04

Charge pump-Output for N-channel MOSFET reverse-polarity protection with integrated spread spectrum modulation feature for optimum EMC performance

Universal High-Voltage Wake Input for voltage level monitoring and wake detection

General Purpose High-Voltage In- and Output (GPIO) configurable as Fail Output, Wake Input, Low-Side switch or High-Side switch

HIgh-Voltage Measurement Function as alternate pin assignment

Fail Outputs for Fail-Safe signalization

Configurable wake-up sources

Reset Output & Interrupt Output

Related links