Hirose, DX Male 20 Pin Straight Cable Mount SCSI Connector 1.27mm Pitch, IDC, Screw
- RS Stock No.:
- 162-5736
- Mfr. Part No.:
- DX31A-20P(50)
- Manufacturer:
- Hirose
This product is currently unavailable to backorder.
Unfortunately, we don’t have this product in stock and it’s not available to backorder at this time.
Price Each
SGD11.22
(exc. GST)
SGD12.23
(inc. GST)
Units | Per unit |
|---|---|
| 1 - 4 | SGD11.22 |
| 5 - 9 | SGD11.14 |
| 10 - 29 | SGD10.97 |
| 30 - 89 | SGD10.48 |
| 90 + | SGD9.08 |
- RS Stock No.:
- 162-5736
- Mfr. Part No.:
- DX31A-20P(50)
- Manufacturer:
- Hirose
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- JP
Product Details
Hirose original 1.27mm pitch High-Density I/O connectors
1.27mm contact spacing conserves valuable board space and permits ultra-high density designs
Bellow contacts create smooth and precise mating and unmating
Unique shell design assures first make/mast break grounding and overall noise protection
IDC termination allows quick and low cost termination to AWG #28 and #30 wires
Back Shell and receptacle shell are made of diecast zinc alloy to reduce the penetration of external EMI noise
Easy to use 'One-Touch' and 'Screw' locking mechanisms assure quick and easy 'positive' closures every time
Termination method is available in IDC, Soldering, Right Angle Dip, Straight Dip and SMT
DX with 3 cavities and 2 cavities for Co-axial contacts are newly introduced to meet the needs of high speed data transmission
Shielded Plug-in type for interface between 2 Units available
Bellow contacts create smooth and precise mating and unmating
Unique shell design assures first make/mast break grounding and overall noise protection
IDC termination allows quick and low cost termination to AWG #28 and #30 wires
Back Shell and receptacle shell are made of diecast zinc alloy to reduce the penetration of external EMI noise
Easy to use 'One-Touch' and 'Screw' locking mechanisms assure quick and easy 'positive' closures every time
Termination method is available in IDC, Soldering, Right Angle Dip, Straight Dip and SMT
DX with 3 cavities and 2 cavities for Co-axial contacts are newly introduced to meet the needs of high speed data transmission
Shielded Plug-in type for interface between 2 Units available
Specifications
Attribute | Value |
|---|---|
| Gender | Male |
| Number of Contacts | 20 |
| Body Orientation | Straight |
| Mounting Type | Cable Mount |
| Contact Material | Copper Alloy |
| Contact Plating | Gold |
| Housing Material | PBT |
| Pitch | 1.27mm |
| Current Rating | 500mA |
| Voltage Rating | 300 V |
| Latch Type | Screw |
| Termination Method | IDC |
| Series | DX |
| Length | 19.18mm |
| Maximum Operating Temperature | +85°C |
| Minimum Operating Temperature | -55°C |
| Width | 17.2mm |
| Depth | 9.2mm |