SKF 32306 Taper 30 mm ID Roller Bearing, 72 mm OD
- RS Stock No.:
- 208-0059
- Mfr. Part No.:
- 32306
- Manufacturer:
- SKF
Subtotal (1 unit)*
SGD71.18
(exc. GST)
SGD77.59
(inc. GST)
Stock information currently inaccessible - Please check back later
Units | Per unit |
|---|---|
| 1 + | SGD71.18 |
*price indicative
- RS Stock No.:
- 208-0059
- Mfr. Part No.:
- 32306
- Manufacturer:
- SKF
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 30mm | |
| Bore Type | Parallel | |
| Cage Material | Pressed Steel | |
| Cone Width | 28.75mm | |
| Limiting Speed | 10000rpm | |
| End Type | Shielded | |
| Cup Width | 23mm | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 85kN | |
| Bearing Material | Steel | |
| Number of Rows | 1 | |
| Outside Diameter | 72mm | |
| Static Load Rating | 95kN | |
| Race Type | Tapered | |
| Bearing Type | Taper | |
| Select all | ||
|---|---|---|
Brand SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 30mm | ||
Bore Type Parallel | ||
Cage Material Pressed Steel | ||
Cone Width 28.75mm | ||
Limiting Speed 10000rpm | ||
End Type Shielded | ||
Cup Width 23mm | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 85kN | ||
Bearing Material Steel | ||
Number of Rows 1 | ||
Outside Diameter 72mm | ||
Static Load Rating 95kN | ||
Race Type Tapered | ||
Bearing Type Taper | ||
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Related links
- RS PRO 32306 Taper 30 mm ID Roller Bearing, 72 mm OD
- Timken 32306 Taper 30 mm ID Metric Roller Bearing, 72 mm OD
- SKF 30306 Taper 30 mm ID Roller Bearing, 72 mm OD
- FAG 30306-DY Taper 30 mm ID Roller Bearing, 72 mm OD
- RS PRO 31306 Taper 30 mm ID Roller Bearing, 72 mm OD
- SKF 31306 Taper 30 mm ID Tapered Roller Bearing, 72 mm OD
- FAG 31306-A Taper 30 mm ID Roller Bearing, 72 mm OD
- NTN 4T-30306D Taper Roller 30 mm ID Roller Bearing, 72 mm OD