SKF 31310/CL7C Cylindrical 50 mm ID Roller Bearing, 110 mm OD
- RS Stock No.:
- 208-0007
- Mfr. Part No.:
- 31310/CL7C
- Manufacturer:
- SKF
Subtotal (1 unit)*
SGD226.30
(exc. GST)
SGD246.67
(inc. GST)
FREE delivery for orders over $75.00, or create a business account to enjoy free delivery from just $28
In Stock
- 1 unit(s) ready to ship from another location
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
|---|---|
| 1 + | SGD226.30 |
*price indicative
- RS Stock No.:
- 208-0007
- Mfr. Part No.:
- 31310/CL7C
- Manufacturer:
- SKF
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 50mm | |
| Bore Type | Cylindrical | |
| Cage Material | Sheet Metal | |
| Limiting Speed | 6000rpm | |
| End Type | Shielded | |
| Cup Width | 19mm | |
| Series | 7FB | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 131kN | |
| Cone Width | 29.25mm | |
| Static Load Rating | 120kN | |
| Outside Diameter | 110mm | |
| Number of Rows | 1 | |
| Bearing Type | Cylindrical | |
| Select all | ||
|---|---|---|
Brand SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 50mm | ||
Bore Type Cylindrical | ||
Cage Material Sheet Metal | ||
Limiting Speed 6000rpm | ||
End Type Shielded | ||
Cup Width 19mm | ||
Series 7FB | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 131kN | ||
Cone Width 29.25mm | ||
Static Load Rating 120kN | ||
Outside Diameter 110mm | ||
Number of Rows 1 | ||
Bearing Type Cylindrical | ||
- COO (Country of Origin):
- DE
SKF 7FB Series Roller Bearing, 50mm Inside Diameter, 110mm Outside Diameter - 31310/CL7C
This roller bearing is designed for radial load support in rotating machinery, providing shielded protection and single-row cylindrical rolling elements for continuous operation. It is intended for use where compact, high-capacity bearings are required and where contamination control and sustained rotational speeds are factors in component selection.
Features and Benefits:
• Sheet-metal cage reduces mass while maintaining internal spacing
• Shielded ends limit ingress for extended service intervals
• High static capacity of 120 kN supports heavy stationary loads
• Dynamic rating of 131 kN sustains repeated operational forces
• Limiting speed of 6,000 r/min enables higher rotational applications
• Single-row configuration simplifies axial alignment requirements
• Shielded ends limit ingress for extended service intervals
• High static capacity of 120 kN supports heavy stationary loads
• Dynamic rating of 131 kN sustains repeated operational forces
• Limiting speed of 6,000 r/min enables higher rotational applications
• Single-row configuration simplifies axial alignment requirements
Applications
• Suitable for industrial gearboxes requiring Compact bearings
• Ideal for conveyor rollers with moderate contamination risk
• Used with electric motor drives operating at elevated speeds
• Can be used for pump shafts under radial loading
• Appropriate for machine-tool spindles with single-row needs
• Ideal for conveyor rollers with moderate contamination risk
• Used with electric motor drives operating at elevated speeds
• Can be used for pump shafts under radial loading
• Appropriate for machine-tool spindles with single-row needs
What bore diameter should the housing accommodate?
The internal bore measures 50 mm so the housing journal must match that dimension.
How does the shielding affect maintenance intervals?
Shields reduce particulate ingress which typically extends lubrication intervals compared with open designs.
Which component governs axial location in assemblies?
The single-row cylindrical design relies on shaft shoulders or external retainers to control axial positioning.
What material is used for the internal cage and how does it influence behaviour?
The cage is fabricated from sheet metal which provides dimensional stability while keeping centrifugal growth low.
What are the axial envelope measurements to consider during assembly?
The assembly requires allowance for a cone width of 29.25 mm and a cup width of 19 mm when fitting adjacent components.
Related links
- FAG 31310-A Taper 50 mm ID Roller Bearing, 110 mm OD
- SKF 32310 Taper 50 mm ID Roller Bearing, 110 mm OD
- SKF 22310 E/VA405 Taper 50 mm ID Roller Bearing, 110 mm OD
- FAG 30310-A Taper 50 mm ID Roller Bearing, 110 mm OD
- NTN 32310U Taper Roller 50 mm ID Roller Bearing, 110 mm OD
- Timken 30310 Taper 50 mm ID Metric Roller Bearing, 110 mm OD
- Timken 32310 Taper 50 mm ID Metric Roller Bearing, 110 mm OD
- SKF 32210 Taper 50 mm ID Roller Bearing, 90 mm OD