KEMET PL Proximity Sensor 5 m 2 V 15V 4 Tape & Reel
- RS Stock No.:
- 205-5825P
- Mfr. Part No.:
- PL-Q873-02
- Manufacturer:
- KEMET
This image is representative of the product range
Bulk discount available
View bulk pricing optionsSubtotal 10 units (supplied on a continuous strip)*
SGD86.20
(exc. GST)
SGD94.00
(inc. GST)
Stock information currently inaccessible - Please check back later
Units | Per unit |
|---|---|
| 10 - 99 | SGD8.62 |
| 100 - 249 | SGD8.36 |
| 250 - 499 | SGD8.11 |
| 500 + | SGD7.87 |
*price indicative
- RS Stock No.:
- 205-5825P
- Mfr. Part No.:
- PL-Q873-02
- Manufacturer:
- KEMET
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | KEMET | |
| Product Type | Proximity Sensor | |
| Maximum Output Current | 20A | |
| Maximum Output Voltage | 550mV | |
| Sensing Distance | 5m | |
| Mount Type | Surface | |
| Package Type | Tape & Reel | |
| Pin Count | 4 | |
| Width | 4.8mm | |
| Length | 5mm | |
| Height | 1.7mm | |
| Maximum Supply Voltage | 15V | |
| Series | PL | |
| Automotive Standard | No | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 70°C | |
| Minimum Supply Voltage | 2V | |
| Select all | ||
|---|---|---|
Brand KEMET | ||
Product Type Proximity Sensor | ||
Maximum Output Current 20A | ||
Maximum Output Voltage 550mV | ||
Sensing Distance 5m | ||
Mount Type Surface | ||
Package Type Tape & Reel | ||
Pin Count 4 | ||
Width 4.8mm | ||
Length 5mm | ||
Height 1.7mm | ||
Maximum Supply Voltage 15V | ||
Series PL | ||
Automotive Standard No | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 70°C | ||
Minimum Supply Voltage 2V | ||
The Kemet Pyroelectric Infrared Sensors use the pyroelectric effect of ceramic by absorbing infrared rays emitted from the human body. This detects the natural infrared signature produced by humans. Also, it can detect infrared rays without using lenses. Due to the absence of a lens, KEMET’s Pyro Sensor is low profile, as it does not protrude, which makes it ideal for gathering visual requirements. With KEMET’s proprietary piezoelectric ceramic material and element structure of the Pyroelectric Infrared Sensor, humans can be detected through glass or resin. This allows more freedom in the design of the outer appearance of the end product.
Reflow capable SMD configuration
Lens not required
A lens can be attached to the sensor
Wide view angle up to ±60 degrees (lens less)
View angle up to ±37/±28 degrees (with lens)
Detection possible through glass or resin
Low power consumption, down in the