Wago, 2002 Marker Kit for use with Marker Strip

Horizontal marking
Consecutive numbers on each strip
10 strips with 10 markers per card for terminal block widths of 5 to 12 mm

RS 758-1865 (WAGO 793-5472) Marking per card = L1, L2, L3, N, PE, PEN, L1, L2, L3, N, PE (10x)
RS 758-1868 (WAGO 793-5566) Marking per card = 1 ... 50 (2x)

Are you looking for a snappy way to label terminal blocks in your electrical setup? Reach for this marker kit from Wago. It helps you brand components in applications for easy identification. Break off the numbered tabs by hand, then snap into the slot on your terminal – no tools needed. Markings go through a thermal transfer process, making them resistant to scratching, moisture and chemicals. This means you can use them in environments where frequent washing is necessary. Thanks to UV protection, the numbers on these tags stay visible in your system for the duration, even when exposed to sunlight.

• Bag contains five cards, giving you enough for your labelling tasks
• Halogen-free material emits hardly any toxic fumes in the event of a fire
• Horizontal marking for clear identification
• Whole card weighs just 8.4g, so adding tabs won't put a strain on your equipment

• Security systems
• Telecommunications equipment
• Control cabinets
• Research facilities

Each card has numbers ranging from one to 50, with every number repeated, giving you plenty of options.

TOPJOB S Series

A range of rail-mounted terminal blocks that can fulfill all industrial and Ex applications, as well as those for building installations. Thanks to CAGE CLAMP® S technology, the TOPJOB® S rail-mounted terminal blocks for the DIN 35 carrier rail give a space saving of 30%. The compact size helps minimize costs through the reduction of panel space used, as well as smaller enclosures and junction boxes.