LeCroy ZD200 Oscilloscope Probe, Probe Type: Active, Differential 200MHz 60V

Technical data sheets
Legislation and Compliance
RoHS Status: Exempt
COO (Country of Origin): US
Product Details

Teledyne LeCroy oscilloscope probes

The Teledyne LeCroy oscilloscope probe offers a wide dynamic range of ±20V and a common-mode range of ±60V to allow a broad application use. The probe sensitivity and offset are automatically optimized based on the oscilloscope gain settings, so control is transparent to the user. When used with a LeCroy digital oscilloscope, no external power supply is required. Differential probes measure the difference in voltage of a test point with another test point.
Supplied with:
Adapted probe leads and tips
Instruction manual
Certificate of calibration
Supplied with:
Y lead set
6x straight tip
2x hook clip
2x micro IC clips
2x Micrograbber
2x extension lead (5cm)
2x extension lead (10cm)
2x dual-pin set (12.8mm)
2x dual-pin set (16.8mm)
Instruction manual
Certificate of calibration

Features and Benefits

Bandwidth is DC to 200MHz
Attenuation ratio is 1:1
Input impedance is 1Mohmll 3.5pF
Input differential range ±20V
Common Mode Range is ±60V
CMRR (typical) is 80dB at 60Hz and 50dB at 10MHz
It provide the best signal fidelity and minimize peaking and other undesirable effects often introduced with probe tips and leads
Complete accessory kit consisting of 3 seta of grabbers, one alligator clip, 2 sets of leads and 2 tip option for probing a variety of test points
Risetime 10–90% (Typical): 1.75ns

Applications

Automotive development
Failure analysis

Specifications
Attribute Value
Probe Type Active, Differential
Attenuation 1:1
Bandwidth 200MHz
Maximum Common Mode Input Voltage 60V
Model Number p ZD200
Series ZD
Rise Time 1.75ns
Temporarily out of stock - back order for despatch 26/10/2020, delivery within 5 working days from despatch date
Price Each
Was SGD3,795.27
SGD 3,576.62
(exc. GST)
SGD 3,826.98
(inc. GST)
units
Per unit
1 +
SGD3,576.62
Related Products
First entry-level oscilloscopes featuring 1GS/s sampling rate and ...
Description:
First entry-level oscilloscopes featuring 1GS/s sampling rate and optional parallel bus trigger and decode modules. "Digital phosphor" technology enables real-time intensity grading of the signal, mimicking the effect of a VT phospor oscilloscope display. 100 MHz, and 200 MHz models1 ...
The Teledyne LeCroy oscilloscope probe is affordable and ...
Description:
The Teledyne LeCroy oscilloscope probe is affordable and optimally designed for measurement of small signals floating on an HV bus in power electronics designs or for EMC, EFT, ESD and RF immunity testing sensor monitoring. It far surpasses the measurement ...
The Pico Technology oscilloscope probe is a passive ...
Description:
The Pico Technology oscilloscope probe is a passive switchable probe with a bandwidth of 100MHz. This probe is an upgraded version of TA132 which includes many improvements to enhance durability, ease of use and performance. It is a passive high-impedance ...
Compact design with a 2.5mm probe tip diameter ...
Description:
Compact design with a 2.5mm probe tip diameter provides better visibility to the circuit under test than conventional 5mm or 3.5mm probe tips. This makes it easier to probe today’s fine pitched space ICs and components. The replaceable probe tip ...