Microchip, 4-port USB Battery Charging Hub USB Evaluation Kit for USB5734, EVB-USB5734

  • RS Stock No. 893-8168
  • Mfr. Part No. EVB-USB5734
  • Manufacturer Microchip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

USB5734 USB 3.0 Hub Controller Evaluation Board

From Microchip the EVB-USB5734 is a demonstration platform for designers to investigate the capabilities of the USB5734 USB 3.0 (also known as USB 3.1 Gen 1) 4-Port Hub Controller.

The featured device supports all defined USB speeds including 5 Gbps SuperSpeed (SS) and 480 Mbps Hi-Speed (HS) on all enabled downstream ports. The USB5734 integrates a USB 2.0 controller to decouple SuperSpeed data from slower USB 2.0 traffic to avoid bottlenecks slower USB 2.0 traffic can create.

Supported on the EVB-USB5734 is battery charging (max. 5A current) on all four downstream ports. The board is configured through internal default settings and also supports custom configurations through SMBus, or through the on-board 64-Mbit SPI Flash device. The EVB-USB5734 demonstrates driver compatibility with Microsoft® Windows® 8x, Windows 7, Windows XP, Mac OS® X 10.4+, and Linux® hub drivers.

Features

USB 3.1 Gen 1 compliant (SS, HS, FS, and LS operation)
USB pins are 5 V tolerant
Four downstream USB 3.1 Gen 1 / USB 2.0 ports
All downstream ports support individual port power and overcurrent sense
All downstream ports are enabled for battery charging (2.1A max per port)
Can support up to 5A total current downstream at any one time
On-board SPI Flash for external downloadable firmware
Low-cost 4-layer space saving design
Operates from a single voltage (+12.0 V, regulated) external power supply
On-board 25 MHz crystal
Single on-board +5.25 V, 6 Amp regulator
Single on-board +3.3 V, 0.5 Amp regulator
Single on-board +1.2 V, 1 Amp regulator
Port Power and Port Enable LED indicators
LED indicators for SPI/Strap Configuration
On-board IO connector for configurable Mode operations

Kit Contents

1 x EVB-USB5734 USB 3.0 Hub Controller Evaluation Board

USB (Universal Serial Bus) - Microchip

Specifications
Attribute Value
Kit Classification Evaluation Kit
Featured Device USB5734
Kit Name 4-port USB Battery Charging Hub
Stock check temporarily unavailable - call for stock availability
Price Each
Was SGD617.19
SGD 579.57
(exc. GST)
SGD 620.14
(inc. GST)
units
Per unit
1 +
SGD579.57
Related Products
The USB to Serial Bridge Controller provides a ...
Description:
The USB to Serial Bridge Controller provides a single configurable serial channel for UART/I²C/SPI interfaces, with low power consumption in stand-by mode.The CY7C65211 controller integrates CapSense capacitive-touch sensing technology (for touch sensitive key switches), and Battery Charging Detection logic. The ...
Atmel® SAM4S Xplained Pro evaluation kit allows design ...
Description:
Atmel® SAM4S Xplained Pro evaluation kit allows design engineers prototyping and evaluation of the ATSAM4SD32C microcontroller. The ARM Cortex M4 evaluation kit is supported by Atmel Studio and has the Atmel Software framework (ASF). The driver file supports both 32-bit ...
The STEVAL-SPIN3204 three-phase brushless DC motor driver board ...
Description:
The STEVAL-SPIN3204 three-phase brushless DC motor driver board is based on the STSPIN32F0B 3-phase BLDC controller with triple half-bridge gate driver, single shunt resistor current sensing topology and programmable overcurrent protection.The motor controller system-in-package includes an STM32F031C6 ...
The STEVAL-IHM032V1 demonstration board is a 3-phase inverter ...
Description:
The STEVAL-IHM032V1 demonstration board is a 3-phase inverter designed to perform both the field-oriented control (FOC) of sinusoidal-shaped back-EMF permanent magnet synchronous motors (PMSMs) and trapezoidal control of brushless DC (BLDC) motors with or without sensors, with nominal power up ...