Schneider Electric Modicon M340 Series PLC Power Supply for Use with Modicon M340, DC, 24 → 48 V

BMXCPSppp0 power supply modules provide the power supply for each BMXXBPpp00 rack and the modules installed on it.

Power supply modules for AC supplies
Power supply modules for DC supplies

Each Power supply requires connectors.

Powering up your programmable logic controller is a piece of cake with this PLC power supply from Schneider Electric. It provides an input of 24 to 48V DC that you can use to run your Modicon M340 or M580 machine. Thanks to isolation on both the input and output, you can trust it to keep you and your equipment safe from harm in case of voltage surges. Built-in LEDs provide at-a-glance status indication and you'll find the module's easy to reset, too – simply press its push button for a cold restart.

• Versatile product suitable for use with all kinds of backplane
• Modular concept of the Modicon X80 range's modular concept helps simplify maintenance and replacement
• EMC characteristics mean you can count on minimal electrical noise
• Resistant to 3gn of vibration and 30gn of shock, for use in harsh industrial settings
• 1ms immunity to microbreaks helps minimise unnecessary system downtime

• Food processing
• Automotive manufacture
• Industrial automation

Yes, this PSU's case is IP20 approved, so you can rest assured it's touch-safe and can be handled without the risk of shocks.

Schneider Electric Modicon M340 PLC

Equipped with astounding memory and performances, this featherweight version will inspire your applications with new momentum. Designed to operate in total synergy with other Schneider Electric devices, Modicon M340 a building block towards your total solution.

Performance

Data rate: 20kb/s to 1Mb/s (bus length dependent)
Internal RAM capacity: 4Mb (3584kb of program memory); 256kb of data memory

Compact design

3 communication ports integrated in the processor
Mounting in low depth cabinet (<150mm)
High-density discrete I/O modules with 64 channels in a 32mm wide format

Communicative, with its integrated ports

CANopen machine and installation bus
Ethernet TCP/IP network - Transparent Ready
Modbus serial link or character mode
Remote access via STN, GSM, Radio or ADSL

Expert

Counter modules with ready-to-use functions
Function block library dedicated to motion control. MF(Motion Function Blocks) to the PLCopen standard
Advanced library of process control blocks oriented towards control of machinery

Innovative and Ruggedness

USB port as standard
Embedded webserver
Recipe file management via FTP protocol
“Plug and Load” SD memory card
No batteries
Rack architecture enabling hot swapping of modules during operation (Hot-Swap)
Exceeds the standards in terms of shocks, vibrations, temperature, altitude and withstand to electrical interference.

Ruggedness