RS PRO IDM93N Handheld Digital Multimeter, 10A ac Max, 10A dc Max, 600V ac Max

RS Stock No.:: 123-3245
Distrelec Article No.:: 304-05-204
Manufacturer:: RS PRO

RS PRO IDM93N Handheld Digital Multimeter, 10A ac Max, 10A dc Max, 600V ac Max

Price Each**

SGD284.53

(exc. GST)

SGD310.14

(inc. GST)

524 In stock for delivery within 4 working days*

* Delivery dates may change based on your chosen quantity and delivery address.

FREE delivery for orders over SGD250.00 (ex GST)

Units	Per unit
1 +	SGD284.53

**price indicative

RS Stock No.:: 123-3245
Distrelec Article No.:: 304-05-204
Manufacturer:: RS PRO

RS PRO IDM93N Rugged Industrial Digital Multimeter

RS Pro IDM93N digital multimeter designed for harsh environments. This is a handheld device which can measure capacitance, voltage, electrical current and resistance with diode and continuity check. This meter has an LCD display where the measurement readouts can be viewed. The rugged body guarantees drop prof resistance from up to 1.5 m. Featuring fuse protection on both 200 mA and 10 A current ranges.

The meter is supplied with a protective holster that includes a built-in tilt stand, a nail hook, and convenient test lead storage. This holster provides an extra degree of protection and convenience for your meter.

RS Pro IDM 91E Multimeters are designed to meet Class II IEC 1010 and UL 3111 standards for the safest operation in all applications.

This device has been designed for the most demanding users that value solid construction and highly accurate measurements.

RS Pro has a range of digital multimeters which are great value for money and are also a high quality that you can rely on.

Features and Benefits:

• 3 1/2 digit 0.8” large scale LCD

• 0.5 % basic DCV accuracy

• 1.0 % basic DCA accuracy

• 1.5 % basic ACA accuracy

• 0.75% basic OHM accuracy

• 1.0 % FREQUENCY accuracy

• 2.0 % CAPACITANCE accuracy

• CONTINUITY and DIODE Test

• 300V protection in non-current ranges

• 500V dual fuses protection

• Auto Power Shut Off

• 1.5 m drop proof

• Protective Holster with tilt stand

• IEC 1010-1 standard CAT. II 600V

What does it measure?

DC and AC Voltages - up to 300 V

DC/AC Current - up to 10A

Resistance and continuity tester - up to 20 MΩ

Diode - open circuit voltage up to 3.2V

Batteries?

150 hours (Alkaline)

Two 1.5V Alkaline type AAA batteries

Low battery indicator

Auto power off - approx 30 minutes after last operation

What does it include?

Installed battery

Test Leads

User manual

Dimensions:

Without Holster: Width 84 mm, Length 175 mm, Height 31 mm

With Holster: Width 95 mm, Length 192 mm, Height 50 mm

Typical Applications:

A digital multimeter (DMM) is a handy test tool that measures electrical values such as voltage, current, and resistance. A DMM is used by technicians in the following areas:

Electrical and electronic industries

Safety guidelines

When using any electrical test equipment it is advised that you refer to the user’s manual for proper working operating procedures and safety precautions in order to avoid potential safety hazards.

What is the difference between an analogue and a digital multimeter?

The main difference is the display. A digital multimeter will show the results as numbers on a screen (usually a LED or LCD screen) whereas the analogue version has a needle to show the value.

Standards

IEC 61010-1: CAT.II 300V/CAT.III 300V

Attribute	Value
Multimeter Type	Handheld
Model Number p	IDM93N
Display Type	Digital
Functions Measured	AC Current, AC Voltage, Capacitance, Conductance, DC Current, DC Voltage, Diode, Frequency, Resistance, RMS, Temperature
Absolute Maximum DC Current Measurement	10A dc
Absolute Maximum DC Voltage Measurement	300V dc
Absolute Maximum AC Current Measurement	10A ac
Absolute Maximum AC Voltage Measurement	600V ac
Absolute Maximum Resistance Measurement	20MΩ
Absolute Maximum Capacitance Measurement	200µF
Maximum Frequency	200kHz
AC Current Measurement Resolution	0.1µA ac
DC Current Measurement Resolution	0.1µA dc
Resistance Measurement Resolution	100mΩ
AC Voltage Measurement Resolution	0.1mV ac
DC Voltage Measurement Resolution	0.1mV dc
Safety Category Level	CAT II
Capacitance Measurement Resolution	1pF
Height	192mm
Weight	550 (With Holster)g
Minimum Operating Temperature	0°C
Best DC Voltage Accuracy	±0.5% + 1 Digits
Best Capacitance Measurement Accuracy	±2% + 4 Digits
Dimensions	95 x 50 x 192mm
Best AC Voltage Accuracy	±1.3% + 4 Digits
Length	95mm
Width	50mm
Best AC Current Accuracy	±2.5% + 3 Digits
Best Resistance Measurement Accuracy	±0.8% + 1 Digits
Maximum Operating Temperature	+50°C
Safety Category Voltage	600V
Best DC Current Accuracy	±1% + 1 Digits
Battery Type	9V, AAA 1.5V x 2, AM4, IEC LR03, IEC6F22, NEDA 1604