Eaton xEffect MCB, 2P, 6A Curve C, 230 → 400V AC, 6 kA Breaking Capacity

Professional range of FAZ6 series miniature circuit breakers (MCB’s) from Eaton. These Type C circuit breakers are designed for use with residential applications. FAZ6 series MCB’s are available with either 1, 2, 3 or 4 pole with an instantaneous release response current of 5-10In. All models are highly reliable and excellent quality.

• Thermal-magnetic overcurrent protection
• Power to the miniature circuit breakers can be fed from the line or load side
• Clear indication of contact position via front switch toggle
• Easy installation on DIN rail. MCB module width of only 17.5 mm (per pole)
• Six levels of short-circuit protection, categorized by Type B, C, D, K, S and Z curves
• Small modular width of the device and accessories saves space in the panel or equipment, which can lead to cost savings
• Available in single pole up to 4 pole
• Dual rating for IEC 60947-2 standard
• MCB Module widths: 1P 17.5mm, 2P 35mm and 3P 52.5mm

IEC 898; BS/EN60-898; EN50 022/DIN46277-3 (BS5584).
FAZ-C*/* & FAZ-S*/* = IEC/EN60947-2

IEC 60947-2 Relates to Low Voltage Circuit Breakers for use in industrial and similar installations. In the UK these are traditionally known as miniature circuit breakers (MCBs), moulded case circuit breakers
(MCCBs) and also air circuit breakers (ACBs).

Type B: Instantaneous trip when the electrical current through the device is 3 to 5 times the rated current. The type B trip curve MCBs are designed for standard circuit protection, typically protection of generators, persons and very long cables

Type C: Instantaneous trip when the flow-through current is 5 to 10 times the rated current.
Type C trip curve residential and domestic MCBs are used for higher inrush currents such as in machines and lighting, providing overload protection of circuits and other consumer units.

Type D: Instantaneous trip when the flow-through current is 10 to 14 times the rated current.
D curve MCBs are suitable for inductive and capacitive loads like transformers condensers. and electric motors.

Type K: Instantaneous trip when the flow-through current is 10 to 14 times the rated current.
Type K curve MCBs are suitable for inductive loads like transformers, condensers. and electric motors.

Type S: Instantaneous trip when the flow-through current is 13 to 17 times the rated current.
Suitable for applications where high levels of inrush current are expected. The high magnetic trip point of type S curve MCBs prevents nuisance tripping in high inductive applications such as motors, transformers and power supplies.

Type Z: Instantaneous trip when the flow-through current is 2 to 3 times the rated current.
Z curve MCBs are intended for use in electrical circuits that require a very low short circuit trip setting, for example, semiconductors.

Need a reliable way to prevent damage to your circuits? This mini circuit breaker (MCB) from Eaton protects your equipment in the event of a short circuit or overload. It's suitable for powerful electrical devices that are vulnerable to high surges of current, as it's a C-Curve MCB. This means it automatically stops currents of five to ten times the device's current rating of 6 A. Find this dependable device used in a range of commercial and industrial applications, from electric motors to fans.

• Wide operating AC voltage range of 230 to 400 V for use in a variety of high-voltage applications
• Two poles to protect two circuits for added versatility
• Compact dimensions of 80 (length) x 17.5 (width) x 61.5 mm (depth) to save space
• Trip-free safety mechanism to ensure contacts remain open in the event of an electrical fault

A C-Curve MCB is suitable for protecting circuits with high inrush and peak currents. It should be used for applications where the expected flow-through current will not exceed ten times the rated amount.

Eaton formerly known as Moeller

FAZ MCB's