RS PRO 12V T1 Sealed Lead Acid Battery, 2.3Ah

They are sealed and have many uses, and are ideal for their uninterruptable power supply and emergency back-up.

These batteries are long life rechargeable batteries.

Float Standby use

Low gas emissions 99% plus recombination

Excellent recovery from deep discharge

Leak proof – Sealed batteries

ABS resin case to UL94-HB fire resistance (Horizontal Burning Test)

Road transport to UN2800 (Batteries, Wet, Non-Spillable)

Air Transport to Special Provision ’A67’ ’IATA’ & ’ICAO’. (Batteries, Wet, Non-Spillable)

Aviation Industry

Golf Carts

Emergency Lighting

Medical Equipment

Wheel Chairs

Forklifts

These batteries contain only enough liquid to keep the specially designed glass mat wet. The glass mat is made to wick the battery electrolytes between the battery plates. If the AGM battery is broken no free liquid leaks out.

AGM batteries are preferred when a large amount of amps are required. The life expectancy remains excellent in most cases, if they are not discharged more than 60% between recharges and/or recharged fully every 3-6 months.

These batteries contains silica type gel, which is a thick paste like material. It allows the electrons to flow between plates, but will not leak in a gel battery if the case is broken.

Gel Cell Batteries don't offer the same power capacity as do the same physical size as AGM batteries. Gel cell batteries excel in slow discharge rates and slightly higher operating temperatures and with excellent deep cycle capability. Recharging these batteries must be done correctly or it will suffer a premature failure.

Proper handling procedures must be followed at all times.