Megger MIT420 2, Insulation Tester 200GΩ CAT IV 600 V

  • RS Stock No. 921-4526
  • Mfr. Part No. 1004-739
  • Manufacturer Megger
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Megger MIT 420 mk2 Series Insulation & Continuity Testers

Meggers MIT420/2 Series of insulation and continuity testers are designed for testing electrical installation and specialist applications where accurate, reliable and safe testing is essential. Combining the latest range of measurement techniques with new instrument design to provide a state-of-the-art tester that is compact and comfortable to hold. Featuring a redesigned case, back-stand and 6 cell battery compartment with separate fuse access. All instruments are over-moulded for increased protection and achieve an IP54 weatherproof rating, providing an almost indestructible case.

All primary results are displayed in the larger digital display and repeated on the analogue arc. Auxiliary test information such as frequency, leakage current, insulation or circuit voltage is displayed in the smaller secondary digital display. A variable range has been added to allow any intermediate voltage from 50 V to 1000 V in 10 V steps. Where application- specific test voltages are required that do not appear in the standard ranges.
Continuity testing is now faster, a single auto-ranging 0.01 Ω to 1.0 MΩ function replaces the "ohms" and "k ohms" ranges. Retained are the 200 mA and 20 mA test options.

Typical Applications include:- Manufacturing/production line goods, electrostatic measurement, component testing, battery powered traction and letting equipment, commercial avionics and military land, marine and air communications.

Stabilised insulation test voltage
600 V TRMS AC and DC voltage measurement
Live circuit detection and protection
CAT IV 600 V & IP54
Weatherproof, rated to IP54
Battery Requirements: 6 AA Alkaline or Nickel Metal Hydride (NIMH)

Standards

EC1010 and BS EN 61557

Supplied with

Hard carry case complete with red/black silicone test lead set with probes, 1 red & 1 black crocodile clip, 1 SP5 Remote Switch Probe, information CD and 6 x AA Alkaline Batteries

Megger Insulation and Continuity Testers

The Megger MIT420/2 insulation and continuity tester has a redesigned case, back-stand and 6-cell battery compartment with separate fuse access. Insulation testing is enhanced with feedback controlled test voltages to limit over-voltage up to 2%, rather than the industry standards i. e. 10-20%. All the primary results are displayed on the larger digital display and repeated on the analogue arc. Auxiliary test information such as frequency, leakage current, insulation or circuit voltage is displayed in the smaller secondary digital display. A variable range has been added to allow any intermediate voltage from 50V to 1000V in 10V steps where application-specific test voltages are required that do not appear in the standard ranges.

Features and Benefits

Insulation testing up to 1000V and 200Gohm range Polarisation index, dielectric absorption ratio, variable test voltage and result storage Stabilised insulation test voltage (New) Single range, faster continuity testing from 0.01ohm to 1Mohm (New) 600V TRMS AC and DC voltage measurement Live circuit detection and protection User variable insulation test voltage from 100V to 1000V (New) depending on model Test result storage and Bluetooth® downloading depending on the model Rechargeable options for mains and car charging (New) depending on the mode

Applications

Industrial sites Cable testing Motor testing Automotive ESD Panel building Avionics Maintenance sites

Certifications

CAT IV 600V IP54 rated

Specifications
Attribute Value
Tester Type Insulation Tester
Minimum Test Voltage 10V
Maximum Test Voltage 1000V
Maximum Insulation Resistance Measurement 200GΩ
Display Type Analogue, Dual Digital
Test Current 205mA
Battery Life 2200 (OFF) Test @ 55 s, 2200 (ON) Test @ 5 s
Minimum Operating Temperature -20°C
Maximum Operating Temperature +55°C
Power Source Battery
Safety Category Level CAT IV
Safety Category Voltage 600V
Safety Category CAT IV 600 V
Height 220mm
Model Number p MIT420 2
Weight 775g
Battery Type Alkaline
Dimensions 92 x 50 x 220mm
Width 50mm
Length 92mm
43 In stock for delivery within 3 working days
Price Each
SGD 1,088.19
(exc. GST)
SGD 1,164.36
(inc. GST)
units
Per unit
1 +
SGD1,088.19
Related Products
The Multi Contact CAT II - SKS4-19L series ...
Description:
The Multi Contact CAT II - SKS4-19L series electrical installation tester connecting plugs are fully insulated 4mm safety connecting the bridge with 19mm plug spacing. They have a solid brass gold-plated connector body. The rated voltage and current for the ...
Insulation resistance testers are used to ensure the ...
Description:
Insulation resistance testers are used to ensure the insulation of wiring is safe, or undamaged after electrical work has been carried out. Testers or megohmmeters are vital in preventing tripped fuses, electrical equipment and instrument breakdown, risk of electric shock ...
Our RS Pro insulation testers are a must-have ...
Description:
Our RS Pro insulation testers are a must-have to any electrician’s kit. They have multiple features that make them powerful tools. This insulation meter is compact, very robust and features a shockproof housing to ensure prolonged life. Our rugged insulation ...
The Fluke Insulation Multimeters combine a digital insulation ...
Description:
The Fluke Insulation Multimeters combine a digital insulation tester with a full-featured, true RMS digital multimeter in a single, compact, handheld unit, which provides maximum versatility for both troubleshooting and preventative maintenance. Large display with backlightInsulation test: 1587: 0.01 MΩ ...