Microchip Technology KSZ8864CNXIA, 4-Port Ethernet Switch IC, 10/100Mbit/s 3.3 V, 64-Pin QFN

  • RS Stock No. 177-3537
  • Mfr. Part No. KSZ8864CNXIA
  • Manufacturer Microchip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

The KSZ8864RMN is a highly-integrated, Layer 2 managed 4-port switch with optimized design, plentiful features and smallest package size. It is designed for cost-sensitive 10/100Mbps 4-port switch systems with on-chip termination, lowest-power consumption, and small package to save system cost.

Advanced switch features
Fully managed 4-port 10/100Mbps switch with dual MII/RMII interfaces
VLAN
QoS packet prioritization
rapid spanning tree protocol (RSTP)
Programmable rate limiting at the ingress and egress on a per port and priority basis
Source MAC address filtering for ring support
MIB counters for fully compliant statistics, gathering 34 MIB counters per port
Ultra-low power consumption with integrated line termination
Single 3.3V supply with internal 1.2V LDO controller
Flexible VDDIO support 3.3V, 2.5V, and 1.8V

Industrial temperature range: -40°C to +85°C
Small 64-Pin 8mm x 8mm QFN

Specifications
Attribute Value
PHY/Transceiver Interface Dual MII/RMII
Typical Data Rate 10/100Mbit/s
Number of Ports 4
VLAN Support Yes
Power Supply Type Single
Typical Operating Supply Voltage 3.3 V
Mounting Type Surface Mount
Package Type QFN
Pin Count 64
Dimensions 0.85 x 8 x 8mm
Height 0.85mm
Length 8mm
Width 8mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
Temporarily out of stock - back order for despatch 28/01/2020, delivery within 3 working days from despatch date
Price Each (In a Tray of 348)
SGD 8.701
(exc. GST)
SGD 9.31
(inc. GST)
units
Per unit
Per Tray*
348 +
SGD8.701
SGD3,027.948
*price indicative
Related Products
The LAN9252 device from Microchip is a 2/3 ...
Description:
The LAN9252 device from Microchip is a 2/3 port EtherCAT® slave controller with dual integrated Ethernet PHYs, each of which contain a full-duplex 100BASE-TX transceiver. The LAN9252 supports HP Auto MDI-X that allows the use of direct connect or cross-over ...
The LAN9252 device from Microchip is a 2/3 ...
Description:
The LAN9252 device from Microchip is a 2/3 port EtherCAT® slave controller with dual integrated Ethernet PHYs, each of which contain a full-duplex 100BASE-TX transceiver. The LAN9252 supports HP Auto MDI-X that allows the use of direct connect or cross-over ...
The KSZ8873MML/MLL/FLL/RLL are highly integrated 3-port switch on ...
Description:
The KSZ8873MML/MLL/FLL/RLL are highly integrated 3-port switch on a chip ICs in a small footprint. Advanced Switch FeaturesComprehensive Configuration Register AccessQoS/CoS Packet Prioritization SupportProven Integrated 3-Port 10/100 Ethernet SwitchSwitch Monitoring FeaturesLow Power DissipationIndustrial ...
The LAN9303 from Microchip is a 3-port 10/100 ...
Description:
The LAN9303 from Microchip is a 3-port 10/100 managed Ethernet Switch in a small footprint QFN package, featuring a MII/RMII/Turbo MII interface that allows network speeds of up to 200Mbps. Full-featured 3-port Switches with per-port IEEE 802.1Q VLAN support (up ...