Adafruit 1770, TFT LCD Display 2.8in Resistive Touch Screen Display Module With MicroSD Socket - ILI9341
- RS Stock No.:
- 124-5469
- Mfr. Part No.:
- 1770
- Manufacturer:
- ADAFRUIT INDUSTRIES
132 In stock for delivery within 4 working days
Added
Price Each
SGD51.95
(exc. GST)
SGD56.63
(inc. GST)
Units | Per unit |
1 - 4 | SGD51.95 |
5 - 9 | SGD46.44 |
10 + | SGD41.59 |
- RS Stock No.:
- 124-5469
- Mfr. Part No.:
- 1770
- Manufacturer:
- ADAFRUIT INDUSTRIES
Legislation and Compliance
Product Details
Adafruit 2.8 inch TFT LCD Touchscreen Breakout Board with microSD Socket
This colour 2.8 TFT display has 4 bright white LED backlight and 240 x 320 pixels with individual RGB pixel control. It has a resistive touchscreen to detect finger presses anywhere on the screen. The built-in controller has RAM buffering to take the workload away from the microcontroller. This display board has two modes: 8-bit and SPI.
When using 8-bit mode, you need 8 digital data lines and 4 or 5 digital control lines to read and write to the display.
SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and dc) but is slower than 8-bit mode.
In addition, 4 pins are required for the touch screen (2 digital, 2 analogue).
It is 3 V to 5 V compliant with high-speed level shifters so you can use with any microcontroller. If you are using SPI mode, you can also take advantage of the on-board micro-SD card socket.
When using 8-bit mode, you need 8 digital data lines and 4 or 5 digital control lines to read and write to the display.
SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and dc) but is slower than 8-bit mode.
In addition, 4 pins are required for the touch screen (2 digital, 2 analogue).
It is 3 V to 5 V compliant with high-speed level shifters so you can use with any microcontroller. If you are using SPI mode, you can also take advantage of the on-board micro-SD card socket.
- 3.3 V @ 150 mA LDO regulator
- 4 white LED backlight, transistor connected so you can use PWM to dim the backlight
- 1 x 20 headers for easy breadboarding
- 4-wire resistive touchscreen
- Thickness: 7.9 mm / 0.3"
- Weight: 40 g
- 4 white LED backlight, transistor connected so you can use PWM to dim the backlight
- 1 x 20 headers for easy breadboarding
- 4-wire resistive touchscreen
- Thickness: 7.9 mm / 0.3"
- Weight: 40 g
Adafruit LCD Touchscreens
Specifications
Attribute | Value |
---|---|
Diagonal Display Size | 2.8in |
Display Technology | Resistive Touch Screen |
Kit Classification | Display Module |
Featured Device | MicroSD Socket - ILI9341 |
Kit Name | TFT LCD Display |