TRACOPOWER TBA 1 DC-DC Converter, 9V dc/ 110mA Output, 21.6 → 26.4 V dc Input, 1W, Through Hole, +85°C Max Temp

Tweak the energy feed to your circuit with this DC-DC converter from Traco Power. It accepts an input voltage range of 21.6 to 26.4V DC and steps it down to a reliably steady 9V DC to keep your kit running smoothly. Isolation between the input and output boosts electrical safety. Thanks to an operating temperature range of -40°C to +85°C, you can trust this converter stands up to extreme conditions. It's a piece of cake to mount – just slot its pins through holes in your board then solder them firmly in place.

• 80% energy efficiency rating means it runs cool, so there's no need for a heat sink
• Low weight of 1.6g means it puts minimal strain on a PCB
• Continuous short-circuit protection prevents fault damage

• Military equipment
• IoT devices
• Computer peripherals
• Audio engineering

As this converter has a typical output ripple and noise of 65mVp-p, you can rest assured there's minimal risk of signal disturbance during the conversion process.

Yes, it has non-conductive plastic housing, so you're not at risk of an electric shock if you touch it.