Microchip Technology MCP2003B-E/SN, LIN Transceiver 20kBd 1-Channel, 8-Pin SOIC

  • RS Stock No. 177-2001
  • Mfr. Part No. MCP2003B-E/SN
  • Manufacturer Microchip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

Stand-alone LIN Transceiver MCP200x family members, 8-pin PDIP, DFN and SOIC packages MCP2003-LIN-compatible driver with WAKE pin MCP2004-LIN-compatible driver with FAULT/TXE pin. This device provides a bidirectional, half-duplex communication physical interface. The device is short circuit and overtemp protected by internal circuitry. The device has been specifically designed to operate in the automotive operating environment.

Support Baud Rates up to 20 Kbaud with LIN-compatible output driver
43V load dump protected
Very low EMI Very high ESD immunity
>20kV on VBB
>14kV on LBUS
Very high immunity to RF disturbances
Wide supply voltage, 6.0V - 27.0V continuous
Extended Temperature Range: -40 to +125°C
Interface to PIC® EUSART and standard USARTs
Local Interconnect Network (LIN) bus pin:
Internal pull-up resistor and diode
Protected against battery shorts
Protected against loss of ground
High current drive
Automatic thermal shutdown

Specifications
Attribute Value
Maximum Data Rate 20kBd
Number of Transceivers 1
Maximum Supply Current 1 mA
Mounting Type Surface Mount
Package Type SOIC
Pin Count 8
Dimensions 4.9 x 3.9 x 1.5mm
Length 4.9mm
Width 3.9mm
Height 1.5mm
Maximum Operating Supply Voltage 30 V
Maximum Operating Temperature +125 °C
Minimum Operating Supply Voltage 5.5 V
Minimum Operating Temperature -40 °C
Automotive Standard AEC-Q100
100 In stock for delivery within 4 working days
Price Each (In a Pack of 20)
SGD 1.071
(exc. GST)
SGD 1.146
(inc. GST)
units
Per unit
Per Pack*
20 - 20
SGD1.071
SGD21.42
40 +
SGD1.022
SGD20.44
*price indicative
Related Products
The MCP2542FD CAN transceiver is designed for high-speed ...
Description:
The MCP2542FD CAN transceiver is designed for high-speed CAN FD applications up to 8Mbps communication speed. The maximum propagation delay was improved to support longer bus length.The device meets the automotive requirements for CAN FD bit rates exceeding 2 Mbps, ...
The MCP2561/2FD is a Microchip Technology Inc. second ...
Description:
The MCP2561/2FD is a Microchip Technology Inc. second generation high-speed CAN transceiver. It offers the same features as the MCP2561/2. Additionally, it guarantees Loop Delay Symmetry in order to support the higher data rates required for CAN FD. The maximum ...
The 7100A device is an Ethernet controller SoC ...
Description:
The 7100A device is an Ethernet controller SoC featuring an 'un-attackable' hardware network engine for preventing network attacks such as flooding, spoofing and injection. The W5200 device does not have the on-chip microcontroller and needs to be connected to an ...
Dual single-pole single-throw analog switch, The 74HC2G66, 74HCT2G66 ...
Description:
Dual single-pole single-throw analog switch, The 74HC2G66, 74HCT2G66 is a dual single pole, single-throw analog switch. Each switch has two input/output terminals (nY and nZ) and a digital enable input (nE). When nE is LOW, the analog switch is turned ...