At TE Connectivity (TE), we are enabling many of the trends and developments in forklifts, AGVs, AMRs, and ASRS through a broad portfolio of board connectivity and relay products; with solutions for electric drives, battery systems, charging stations, electric control units (ECUs), and wiring. Through our global manufacturing footprint and logistics and support network, we enable multinational players to source in-location worldwide, where our field application experts can advise on product choice, evaluate architecture, and help optimize the function and cost of warehouse equipment.
The motor controller (often called inverter or drive) powers and controls the motor in warehouse automation equipment. To enable efficiency and quality control of the motor, fast and reliable connectivity between the motor and inverter is needed.
As is the case with all factory-based electric drive applications, shock and vibration capability, and sealing are important factors at play in warehouse automation equipment such as forklifts, AGVs, AMRs, and ASRS. Below you can browse our products for electric drives, which arespecifically engineered to provide reliable, high-quality connections, all in a small form factor.
Dynamic Series are vibration resistant wire-to-board, wire-to-panel and wire-to-wire connectors used for both signal circuit, power and hybrid power supply circuit applications. Able to carry 100 A max of current per position.
Universal MATE-N-LOK connectors utilize a combination of pins and sockets intermixed in the housings to achieve excellent performance in a .250 [6.35] pitch design. Rated to 600VAC/VDC and 19 A, these offer wire-to-wire, wire-to-panel, and wire-to-board configurations.
Cost-effective, reliable relay solutions designed to withstand extreme shock, vibration. Use our relay selector tool to find the relay suited for your electric drive needs.
Circular connector with a 12-mm locking thread designed for rugged environments.
MCP is the standard automotive-grade connector system. Two-piece receptacle/tab designs with separate electrical and mechanical properties provide reliable performance in high-vibration applications.
In warehouse automation, the reliability of forklifts, AGVs, AMRs, and ASRS is crucial. The steady operation of these warehouse vehicles depends on a battery management system (BMS), which tracks battery usage, temperature, and charging status.
Since battery connectors are one of the most vulnerable parts of the system, the use of rugged, high-quality connections is key to avoiding downtime. Our products for battery management are designed and engineered to work in harsh environments with high vibration. They also enable the miniaturization needed for increasingly compact batteries and battery systems.
Dynamic Series are vibration resistant wire-to-board, wire-to-panel and wire-to-wire connectors used for both signal circuit, power and hybrid power supply circuit applications. Able to carry 100 A max of current per position.
Our AMP power series consists of single-pole and 2-pole (battery) connector housings, crimp snap-in contacts and accessories. These connectors provide a durable, quick connect/disconnect means to transmit power levels of current and voltage (15-275 A, 600 V AC/DC).
Universal MATE-N-LOK connectors utilize a combination of pins and sockets intermixed in the housings to achieve excellent performance in a .250 [6.35] pitch design. Rated to 600VAC/VDC and 19 A, these offer wire-to-wire, wire-to-panel, and wire-to-board configurations.
Cost-effective, reliable relay solutions designed to withstand extreme shock, vibration. Use our relay selector tool to find the relay suited for your electric drive needs.
Where there are batteries, there must be charging. Speed is key in warehouse automation, and the various robots operating in a warehouse cannot sit idly for hours on end to power up. Therefore, charging currents tend to be high in warehouses, ranging from 40 A to 300 A.
Reliable power connectors simplify assembly efforts and help reduce safety hazards, and TE’s products can help improve power distribution capabilities between the charger, battery, and drive system. Our connectors offer multiple contact points to support high-vibration tolerance, and our large product portfolios serve a wide variety of uses and compact designs.
Cost-effective, reliable relay solutions designed to withstand extreme shock, vibration. Use our relay selector tool to find the relay suited for your electric drive needs.
Dynamic Series are vibration resistant wire-to-board, wire-to-panel and wire-to-wire connectors used for both signal circuit, power and hybrid power supply circuit applications. Able to carry 100 A max of current per position.
Our Corcom EMI filters are tested for susceptibility and/or emissions applications with approval from major safety agencies throughout the world, including UL, CSA, and VDE.
Our wire-wound power resistors are designed for reliable control of current and voltage. Our portfolio includes cement-encased wire-wound power resistors, offering reliable circuit protection in heavy-use applications.
Our ENTRELEC SNK terminal blocks are available in PI-Spring (Push-In and Spring), screw clamp, and pluggable technologies designed for stable electrical contact value.
Rectangular data connectors are designed for Ethernet networking with data rates of 10/100 Mbps and 1 Gbps and various form factors, including RJ45 jacks, Ethernet magnetics, and field-installable cable connectors. These connectors also support Power over Ethernet (PoE), PoE+, and PoE++ (IEEE802.3at and IEEE802.3bt).
Our AMP power series consists of single-pole and 2-pole (battery) connector housings, crimp snap-in contacts and accessories. These connectors provide a durable, quick connect/disconnect means to transmit power levels of current and voltage (15-275 A, 600 V AC/DC).
In warehouse vehicles and equipment, a multitude of controllers, sensors, actuators, and human-machine interfaces (HMI) need to be wired together. For all these systems to work together, the connections between them must be robust and capable of withstanding high vibration. For sensors and actuators, interoperability between suppliers and high protection against dust, liquids, and vibration is important.
Our products for ECUs and vehicle wiring are designed with harsh environments in mind and offer reliable field installable solutions with push-pull technology and multiple connectors mounting options for easy integration in devices.
MCP is the standard automotive-grade connector system. Two-piece receptacle/tab designs with separate electrical and mechanical properties provide reliable performance in high-vibration applications.
Lightweight, all-plastic and metal-shell connectors with quick connect/disconnect capability with thread assist, positive dent coupling.
Circular connector with a 12-mm locking thread designed for actuators, sensors, industrial ethernet, and Fieldbus. Available with 3, 4, 5, 8, and 12 pins. Full solution including connectors, I/O modules, and cable assemblies.
Cost-effective, reliable relay solutions designed to withstand extreme shock, vibration. Use our relay selector tool to find the relay suited for your electric drive needs.
Dynamic Series are vibration resistant wire-to-board, wire-to-panel and wire-to-wire connectors used for both signal circuit, power and hybrid power supply circuit applications. Able to carry 100 A max of current per position.
Remote I/O Termination System (RITS) connectors are reliable, field-installable connectors using IDC connection; ensuring cost-effective operation within industrial I/O applications, even under severe conditions. Available in a high-density 2.0-mm configuration and various housings options such as plug, SMT-PCB mountable, panel mount, junction box and socket connectors.
Our Micro-MaTch wire-to-board and board-to-board ribbon cable connectors provide a proven reliable connection through a unique contact-spring system that helps prevent fretting corrosion by absorbing movements between male and female contacts.
Our switches for warehouse automation applications include emergency stop switches, push button switches, and keylock switches. These products are cost-effective, reliable, high-performance solutions designed to withstand shock and vibration.
Email address
The personal information you provide to us when signing up to this mailing list will be processed in line with the Privacy Policy
