Multimeter Leads

Multimeter leads are wires used with analogue and digital multimeters for testing and identifying problems. Multimeter leads are used for the testing of electrical components and circuits. They can be used to measure voltage, current and resistance. Test leads feature a connector, such as a jack, to connect to the multimeter and another connector for testing, such as a probe, crocodile clip or banana plug. Multimeter test leads are considered an essential part of electrical measurement.

Test leads must be in good condition. If the test leads are faulty, this can lead to inaccurate readings and could result in a health and safety concern if live wires are being read as being de-energised. Therefore it is important to keep your test leads in good condition and replace them when necessary. A lead kit for measuring high voltage and high energy circuits, such as distribution system voltages (240V- 600V), needs to be high quality, with the proper markings and product ratings. You should always take precautionary steps to verify the condition and rating of the leads before testing to ensure safety in the workplace.


We have a range of available connector types to suit your needs, including crocodile clips, banana plugs, angled plugs and retractable plugs, as well as application-specific kits, such as automotive, electrical and industrial kits.

We also offer a variety of Multimeters & Accessories for all your testing needs.

Checking your Multimeter Leads:

  • Confirm that the multimeter and multimeter test leads are rated for the category and voltage level appropriate for the electrical environment they will be used in. Electrical measurement category ratings are defined by the safety standard, IEC61010 and have four ratings, CAT I, CAT II, CAT III and CAT IV.
  • Inspect the leads to make sure they are safe to use and able to conduct electrical signals accurately. This includes checking that the leads are properly insulated with no cracks through the cables and also checking the connectors are clean and debris-free.
  • Complete a visual inspection first then conduct simple ohms measurement to confirm they are electrically reliable and able to carry a signal within allowable loss parameters.

...
Read more Read less

Filters

Viewing 1 - 20 of 130 products
Results per page
Description Price Lead Type Product Type Connector Type Fused Lead Length Current Rating Safety Category Voltage Safety Category Minimum Operating Temperature Maximum Operating Temperature Safety Category Level
RS Stock No. 243-2998
BrandRS PRO
SGD26.67
Each
units
Test Lead Kit - Crocodile Clip, Right Angle Plug - 1.2m 10A 1000V CAT III 1000V - - CAT III
RS Stock No. 726-3624
Mfr. Part No.TL75-1
BrandFluke
SGD150.51
Each
units
Test Lead Kit - Banana Plug - 1.22m 10A 600V, 1000 V CAT III 1000 V, CAT IV 600V - - CAT III, CAT IV
RS Stock No. 726-3615
Mfr. Part No.TL71-1
BrandFluke
SGD58.81
Each
units
Test Lead Kit - Right Angle - 1.5m 10A 1000V CATII 1000V - - CAT III, CAT IV
RS Stock No. 705-1276
Mfr. Part No.TL175E
BrandFluke
SGD76.65
Each
units
Test Lead - 4 mm Banana Plug - 1.2m 10A 1000V CAT II, CAT II 1000 V, CAT III 1000V - - CAT II, CAT III
RS Stock No. 468-7415
Mfr. Part No.TL76
BrandFluke
SGD79.52
Each
units
Test Lead Kit - Banana Plug, Shrouded 4 mm - 1.5m 10A 600 V, 1000V CAT III 1000 V, CAT IV 600V - - CAT III, CAT IV
RS Stock No. 741-4358
Mfr. Part No.TL175
BrandFluke
SGD92.01
Each
units
Test Lead Kit - Shrouded - - 10A 600V, 1000 V CAT III 1000 V, CAT IV 600V -20°C +55°C CAT III, CAT IV
RS Stock No. 161-6511
BrandRS PRO
SGD22.21
Each
units
Test Lead - Crocodile Clip - 500mm - - - - - -
RS Stock No. 412-119
Mfr. Part No.FLUKE TLK287
BrandFluke
SGD308.83
Each
units
Electronic Master Test Lead Kit - Banana Jack, Coupler, Crocodile Clip, Micrograbber, Spade Lug No 1.5m 2 A, 5A, 10 A 300V, 1000 V CAT II 300 V, CAT III 1000V - - CAT II, CAT III
RS Stock No. 436-866
Mfr. Part No.TLK289
BrandFluke
SGD323.25
Each
units
Industrial Test Lead Kit - Crocodile Clip, Hook Clip, Shrouded 4 mm No - - - - - - -
RS Stock No. 726-3633
Mfr. Part No.TL220-1
BrandFluke
SGD162.00
Each
units
Industrial Test Lead Kit - Crocodile Clip, Right Angle to Right Angle - 1.6m 10A 600V, 1000 V CAT III 1000 V, CAT IV 600V - - CAT III, CAT IV
RS Stock No. 764-8696
Mfr. Part No.34133A
SGD60.03
Each
units
Right Angle Plug - Pogo Pin - 1.2m 3A 1000V CAT II 1000V - - -
RS Stock No. 731-5277
BrandRS PRO
SGD85.98
Each
units
Test Lead Kit - Crocodile Clip, Right Angle Plug, Spring Hook, Straight Plug - 1.2m - 600V CAT III 600V -20°C +70°C CAT III
RS Stock No. 324-5975
Mfr. Part No.1639274
BrandFluke
SGD272.00
Each
units
Electronic Test Lead Kit - Crocodile Clip, Hook Clip - 1m 3 A, 5A, 10 A 300V CAT II 300V - - CAT II
RS Stock No. 450-2358
Mfr. Part No.TL224
BrandFluke
SGD74.37
Each
units
Silicone Test Lead Set - Banana Plug - 1.5m 10A 600V, 1000 V CAT III 1000 V, CAT IV 600V - - CAT III, CAT IV
RS Stock No. 726-3649
Mfr. Part No.TLK-225-1
BrandFluke
SGD343.29
Each
units
Test Lead Kit - - - - - - - - - -
RS Stock No. 468-7358
Mfr. Part No.2128533
BrandFluke
SGD282.20
Each
units
SureGrip Kit with Probe Light & Extender - - - - - - - - - -
RS Stock No. 692-7147
Mfr. Part No.11059A
SGD305.34
Each
units
Kelvin Probe Set - Banana Plug - 800mm - - - - - -
RS Stock No. 731-8982
Mfr. Part No.TL80A-1
BrandFluke
SGD145.00
Each
units
Electronic Test Lead Kit - Crocodile Clip - 1m 3 A, 5A 300V CAT II 300V - - CAT II
RS Stock No. 726-3637
Mfr. Part No.TL223-1
BrandFluke
SGD188.32
Each
units
Electrical Test Lead Kit - Crocodile Clip, Flat Blade, Straight to Right Angle - 1.5m - 600V, 1000 V CAT III 1000 V, CAT IV 600V -20°C +55°C CAT III, CAT IV
RS Stock No. 424-4686
Mfr. Part No.SPL2400
SGD72.45
1 Set
Set(s)
Test Lead Kit - 2 mm Male, 2.4 mm Male, 4 mm Male - 1m 10 A, 12 A, 32A 1000V CAT II 1000V - - CAT II