Isolation Amplifiers

Isolation Amplifiers are instruments that have been designed to measure the smallest current and voltage signals in the presence of high common mode voltage by providing electrical safety barrier and electrical isolation. They are differential amplifiers that protect data acquisition components from common mode voltages, which are potential differences between instrument ground and signal ground.

How to select a correct isolation amplifier?
There are two main types of isolation amplifiers and the decision of using one or another may depend on several aspects and user needs:

• Single-ended, floating common - an isolated and quasi-balanced input (the floating common is typically connected to the (-) input of differential amplifier). Suitable for off-ground measurements up to breakdown voltage of the isolation barrier, and exhibits very good common mode rejection (100 dB typical).

• Differential, floating common - an isolated and balanced input. Suitable for off-ground measurements of the breakdown voltage of the isolation barrier, and exhibits superb common mode rejection (>120 dB).

What is typical application of isolation amplifiers?
Isolation amplifiers are commonly used in test and measurement or medical devices. Also, they are popular in solar and fuel cells construction to profile the performance of individual series-connected voltage cells.

...
Read more Read less

Filters

Viewing 81 - 100 of 123 products
Results per page
Description Price Power Supply Type Typical Dual Supply Voltage Typical Single Supply Voltage Isolation Mode Rejection Rail to Rail Number of Channels per Chip Maximum Voltage Gain Mounting Type Package Type Pin Count Dimensions Height Width Length
RS Stock No. 795-1472
Mfr. Part No.Si8261BAA-C-IS
SGD2.11
Each (In a Pack of 5)
units
Single - 5 → 30 V - Rail to Rail Output 1 - Surface Mount SOIC 8 5 x 4 x 1.55mm 1.55mm 5mm 5mm
RS Stock No. 693-5965
Mfr. Part No.ACPL-C784-000E
BrandBroadcom
SGD8.86
Each
units
Single - 5 V 76dB - 1 18.49dB Surface Mount SSOP 8 3.18 x 5.85 x 6.81mm 3.18mm 6.81mm 5.85mm
RS Stock No. 786-3167
Mfr. Part No.ADUM4190BRIZ
SGD5.265
Each (In a Pack of 2)
units
Single - 3 → 20 V - - 1 80dB Surface Mount SOIC 16 12.85 x 7.6 x 2.44mm 2.44mm 7.6mm 12.85mm
RS Stock No. 121-9702
Mfr. Part No.AMC1200SDUB
SGD7.55
Each (In a Tube of 50)
units
Dual 5V - - - 1 8 Surface Mount SOP 8 9.55 x 6.67 x 3.35mm 3.35mm 6.67mm 9.55mm
RS Stock No. 817-5789
Mfr. Part No.AMC1200SDUB
SGD9.03
Each
units
Dual 5V - - - 1 8 Surface Mount SOP 8 9.55 x 6.67 x 3.35mm 3.35mm 6.67mm 9.55mm
RS Stock No. 709-2324
Mfr. Part No.ISO122JU
SGD40.95
Each
units
Dual ±12 V, ±15 V, ±5 V, ±9 V - - - 1 0dB Surface Mount SOP 8 2.3 x 17.9 x 7.5mm 2.3mm 7.5mm 17.9mm
RS Stock No. 796-8748
Mfr. Part No.ADUM4190SRIZ
SGD4.99
Each (In a Pack of 5)
units
Single - 3 → 20 V 72dB - 1 80dB Surface Mount SOIC 16 12.85 x 7.6 x 2.44mm 2.44mm 7.6mm 12.85mm
RS Stock No. 300-8259
Mfr. Part No.ISO124U
SGD30.55
Each
units
Dual ±12 V, ±15 V, ±5 V, ±9 V - - - 1 0dB Surface Mount SOP 8 2.3 x 17.9 x 7.5mm 2.3mm 7.5mm 17.9mm
RS Stock No. 127-0272
Mfr. Part No.AD202JN
SGD121.03
Each
units
Single - 15 V 130dB - 1 40dB Through Hole PDIP 11 8.9 x 53.3 x 17.8mm 8.9mm 17.8mm 53.3mm
RS Stock No. 288-777
Mfr. Part No.ISO122U
SGD49.47
Each
units
Dual ±12 V, ±15 V, ±5 V, ±9 V - - - 1 0dB Surface Mount SOIC 28 2.3 x 17.9 x 7.5mm 2.3mm 7.5mm 17.9mm
RS Stock No. 450-862
Mfr. Part No.HCPL-788J-000E
BrandBroadcom
SGD11.35
Each
units
Dual 5V - 140dB - 1 - Surface Mount SOIC 16 3.51 x 10.31 x 7.49mm 3.51mm 7.49mm 10.31mm
RS Stock No. 786-3154
Mfr. Part No.ADUM3190BRQZ
SGD4.26
Each (In a Pack of 2)
units
Single - 3 → 20 V - - 2 80dB Surface Mount QSOP 16 5 x 4.01 x 1.65mm 1.65mm 4.01mm 5mm
RS Stock No. 922-6765
Mfr. Part No.ACPL-C87A-000E
BrandBroadcom
SGD8.15
Each (In a Tube of 80)
units
Single - 4.5 → 5.5 V -78dB - 1 1.01V/V Surface Mount SSOP 8 5.85 x 6.807 x 3.18mm 3.18mm 6.807mm 5.85mm
RS Stock No. 121-8514
Mfr. Part No.ISO124U
SGD26.683
Each (In a Tube of 20)
units
- - - - - - - - - - - - - -
RS Stock No. 922-5687
Mfr. Part No.HCPL-7800A-000E
BrandBroadcom
SGD15.09
Each (In a Tube of 50)
units
Single - 5 V 76dB - 1 18.14dB Through Hole PDIP 8 3.56 x 9.8 x 6.35mm 3.56mm 6.35mm 9.8mm
RS Stock No. 461-8267
Mfr. Part No.ISO122JP
SGD36.21
Each
units
Dual ±12 V, ±15 V, ±5 V, ±9 V - - - 1 0dB Through Hole PDIP 8 3.94 x 20.01 x 6.61mm 3.94mm 6.61mm 20.01mm
RS Stock No. 922-6762
Mfr. Part No.ACPL-C870-000E
BrandBroadcom
SGD6.78
Each (In a Tube of 80)
units
Single - 4.5 → 5.5 V -78dB - 1 1.03V/V Surface Mount SSOP 8 5.85 x 6.807 x 3.18mm 3.18mm 6.807mm 5.85mm
RS Stock No. 803-0747
Mfr. Part No.ACPL-782T-300E
BrandBroadcom
SGD17.44
Each
units
- - - - - - - Surface Mount DIP - - - - -
RS Stock No. 159-9273
Mfr. Part No.ADUM3190ARQZ
SGD3.03
Each (In a Tube of 98)
units
Single - 3 → 20 V - - 2 80dB Surface Mount QSOP 16 5 x 4.01 x 1.65mm 1.65mm 4.01mm 5mm
RS Stock No. 369-5819
Mfr. Part No.AD210JN
SGD161.148
Each (In a Tube of 9)
units
Single - 15 V 120dB - 1 40dB Through Hole PDIP 12 8.91 x 53.3 x 25.4mm 8.91mm 25.4mm 53.3mm
Related Products
The Instrumentation Amplifier ICs amplify the difference between ...
Description:
The Instrumentation Amplifier ICs amplify the difference between two input signal voltages, while rejecting any signals that are common to both inputs. The DC precision and gain accuracy is maintained within a noisy environment, and also where large common-mode signals ...
The Instrumentation Amplifier ICs amplify the difference between ...
Description:
The Instrumentation Amplifier ICs amplify the difference between two input signal voltages, while rejecting any signals that are common to both inputs. The DC precision and gain accuracy is maintained within a noisy environment, and also where large common-mode signals ...
The Instrumentation Amplifier ICs amplify the difference between ...
Description:
The Instrumentation Amplifier ICs amplify the difference between two input signal voltages, while rejecting any signals that are common to both inputs. The DC precision and gain accuracy is maintained within a noisy environment, and also where large common-mode signals ...
Thermocouple-to-Digital ConverterIntegrated Cold-Junction CompensationThermocouple Types: K-, J-, N-, ...
Description:
Thermocouple-to-Digital ConverterIntegrated Cold-Junction CompensationThermocouple Types: K-, J-, N-, T-, S-, R-, and E-Type0.25°C ResolutionDetects Thermocouple Shorts to GND or VCCDetects Open ThermocoupleInterfaces with simple SPI-Compatible Serial Interface (Read-Only) to Microcontrollers.