Door Catches

Door catches are typically used on internal doors, cupboards and general storage solutions to ensure that the doors are held shut. They are typically screw mounted to ensure a secure, long-lasting and reliable installation. Some can be pressed mounted into place, where a structural lip or support can hold the catch in place.

Catches can be fitted at any height on a door however the most common placements are either central often beside the main handle access or split between the top and bottom of a door. This split installation can offer a better closure for a door as the two catches can provide more even pressure across the length of the door while a central lock or latch can also hold creating three hold points on the door.

Materials and finishes

Materials and finishes vary based on the catch application and can be manufactured in a range of solid, robust materials such as brass, steel, reinforced nylon and a range of plastics to ensure it is reliable and has a long service life. Finished acrylic these different material types varies, metal parts can be plated, the plating reduces the requirement of any maintenance and helps to retain its appearance over time.

Types of Door Catches

  • Ball Catch
  • Double Ball Catch
  • Magnetic Catch
  • Pressure Catch
  • Grabber Catch

...
Read more Read less

Filters

Viewing 1 - 20 of 59 products
Results per page
Description Price Catch Type Material Dimensions Catch Fixing Hole Distance Strike Fixing Hole Distance Length Width Fixing Hole Size
RS Stock No. 665-9954
BrandRS PRO
SGD6.27
Each (In a Pack of 4)
units
- Plastic, Steel - - - - - -
RS Stock No. 293-7869
BrandRS PRO
SGD29.57
Each
units
- Die Cast Zinc - - - - - -
RS Stock No. 181-244
BrandRS PRO
SGD4.828
Each (In a Pack of 4)
units
- - - - - - - -
RS Stock No. 181-250
BrandRS PRO
SGD13.745
Each (In a Pack of 4)
units
- - - - - - - -
RS Stock No. 665-9932
BrandRS PRO
SGD1.103
Each (In a Pack of 4)
units
- Plastic - - - - - -
RS Stock No. 161-1953
BrandRS PRO
SGD8.16
Each
units
Grabber ABS, PC 23.5 x 11.4 x 72 mm, 38.2 x 17 x 43mm 38.2mm 55.0mm 38.2mm 17.0mm 4.3 x 8.3mm
RS Stock No. 124-1901
BrandRS PRO
SGD42.20
Each
units
- - - - - - - -
RS Stock No. 124-1903
BrandRS PRO
SGD18.86
Each
units
- Die Cast Zinc - - - - - -
RS Stock No. 161-1954
BrandRS PRO
SGD10.22
Each (In a Bag of 2)
units
Grabber Fibreglass Reinforced Nylon 23.5 x 11.4 x 74 mm, 28 x 13.5 x 48mm 40.5mm 55.0mm 28.0mm 13.5mm 3.4 mm, 3.4 x 8.4 mm, 4.3 x 8.3mm
RS Stock No. 161-1955
BrandRS PRO
SGD5.46
Each
units
Grabber Fibreglass Reinforced Nylon 23.5 x 11.4 x 74 mm, 28 x 13.5 x 48mm 40.5mm 55.0mm 28.0mm 13.5mm 3.4 mm, 3.4 x 8.4 mm, 4.3 x 8.3mm
RS Stock No. 124-1900
BrandRS PRO
SGD40.80
Each
units
- Die Cast Zinc - - - 104.5mm 31.5mm -
RS Stock No. 161-1956
BrandRS PRO
SGD10.27
Each (In a Bag of 2)
units
Grabber Fibreglass Reinforced Nylon 23.5 x 11.4 x 74 mm, 28 x 13.5 x 48mm 40.5mm 55.0mm 28.0mm 13.5mm 3.4 mm, 3.4 x 8.4 mm, 4.3 x 8.3mm
RS Stock No. 227-0920
Mfr. Part No.C3-805-RS
BrandSouthco
SGD11.16
Each
units
Grabber - 48.3 x 28.2mm 40.6mm 55.0mm 48.3mm 28.2mm 3.3mm
RS Stock No. 341-0371
SGD26.84
Each
units
Double Ball Brass 70 x 12.5mm 57.0mm 30.0mm 70.0mm 12.5mm 4.0mm
RS Stock No. 917-4368
Mfr. Part No.16-7-4207
BrandPinet
SGD8.145
Each (In a Pack of 2)
units
- Steel - - - - - -
RS Stock No. 340-2156
Mfr. Part No.C3-803-RS
BrandSouthco
SGD10.80
Each (In a Pack of 2)
units
Grabber - 48.3 x 28.2mm 40.6mm 55.0mm 48.3mm 28.2mm 3.3mm
RS Stock No. 917-4355
Mfr. Part No.841717
BrandPinet
SGD12.92
Each (In a Pack of 2)
units
- Plastic - - - - - -
RS Stock No. 341-0343
SGD10.37
Each
units
Double Ball Brass 50 x 9.5mm 41.0mm 20.0mm 50.0mm 9.5mm 4.0mm
RS Stock No. 245-5531
Mfr. Part No.E4-10-201-10-RS
BrandSouthco
SGD10.96
Each
units
- - 19 x 13 x 30.3mm - - 19.0mm 13.0mm -
RS Stock No. 340-2207
Mfr. Part No.E3-5-15-RS
BrandSouthco
SGD5.01
Each
units
- Steel - - - - - -