Soldering Iron Tips

Most Soldering Irons have interchangeable tips which vary in size and shape dependent on the type of soldering work you are doing. Soldering tips have an angle range from 22° to 90°. Most soldering iron tips are made of a copper core plated with iron. The copper is used for the heat transfer and the iron plate is durable. Copper corrodes easily and can eat away the tip especially in lead free soldering, iron is not.
Soldering Tips can be used with various Soldering Irons so when choosing a soldering tip it’s important to ensure it is compatible with the soldering iron.

TIP SHAPES:
Bent
Chisel
Conical
Knife
Sharp
Bevel
Blade
Conical
Micro-fine
Semi-chisel
Hoof
Pyramid tips that have a triangular flat face and Chisel tips with a wide flat face are used for soldering sheet metal.
Fine Conical or tapered chisel tips as used for electronics soldering work.
TIP CLEANING:
When a tip oxidises and burnt flux accumulates solder will no longer wet the tip and stops the heat transfer making it difficult to solder. This is why it is important to clean the soldering tip. Oxidising happens with all types of solder but is more frequent when using a lead free solder especially with electronic work. If you use a wet sponge to wipe the tip it helps to keep the tip clean.

...
Read more Read less

Filters

Viewing 741 - 760 of 851 products
Results per page
Description Price Model Number Tip Shape For Use With Tip Size Tip Series Tip Angle Soldering Accessory Type
RS Stock No. 182-7736
Mfr. Part No.UFC-7CN5504R
BrandMetcal
SGD70.81
Each
units
UFC Bent Conical CV-H2-UF 0.4 x 5.5 mm 7CN 30° -
RS Stock No. 415-4173
Mfr. Part No.0G132KN
BrandErsa
SGD34.00
Each
units
- Chisel Independent 130 2.4 mm Serie G 132 - -
RS Stock No. 860-9400
Mfr. Part No.M8CH250
SGD31.64
Each
units
- Straight Chisel MX-500, MX-5000, MX5200, TMT-9000S-1, TMT-9000S-2 5 mm M - -
RS Stock No. 209-1878
Mfr. Part No.4PTD7-1
BrandWeller
SGD10.93
Each
units
PT D7 Screwdriver TCP 12, TCP 24, TCP 42, TCPS W 61, W 101, W201 4.75 mm PT - -
RS Stock No. 207-7024
Mfr. Part No.T0054000199
BrandWeller
SGD17.91
Each
units
6110 Cutting Tip 8100, 9200 - - - -
RS Stock No. 182-7636
Mfr. Part No.CVC-7CH0018S
BrandMetcal
SGD56.18
Each
units
CVC Conical Chisel CV-H1-AV, CV-H7-AV, MX- RM3E, MX-H1-AV, MX-H7-SF, MX-RM6E 1.78 x 9.9 mm 700 30° -
RS Stock No. 167-598
Mfr. Part No.RX-80HRT-2C
SGD27.51
Each
units
- Straight Hoof RX-802AS Station 2 mm RX-80HRT 45° -
New
RS Stock No. 202-4498
BrandRS PRO
SGD10.62
Each
units
RS PRO Straight Conical RS PRO Soldering Station (7998941) 1.4 mm DS -
RS Stock No. 184-6674
Mfr. Part No.T0050100799
BrandWeller
SGD44.45
Each
units
RTM 018 S Screwdriver WMRP, WXMP 1.8 x 0.4 x 18 mm RT - -
RS Stock No. 167-510
Mfr. Part No.RX-80HRT-B
SGD19.95
Each
units
- Straight Conical RX-802AS Station R0.3 mm RX-80HRT - -
RS Stock No. 431-6191
Mfr. Part No.T0051644399
BrandWeller
SGD24.68
Each
units
60 01 01 Needle WP 60K 1 mm - - -
RS Stock No. 512-648
Mfr. Part No.10288900
BrandAntex
SGD19.04
Each
units
- - Gascat 60 3.2 mm - - -
RS Stock No. 860-9311
Mfr. Part No.K75CP010
SGD17.46
Each
units
- Conical Sharp MFR-PS1100, MFR-PS2200 w/SHP-KM, PS900 w/SHP-K, TMT-2000PS 1 mm K - -
RS Stock No. 512-660
Mfr. Part No.10288920
BrandAntex
SGD14.66
Each
units
- Straight Knife Gascat 60 - - - -
RS Stock No. 182-7638
Mfr. Part No.CVC-7CH0050S
BrandMetcal
SGD56.18
Each
units
CVC Chisel CV-H1-AV, CV-H7-AV, MX- RM3E, MX-H1-AV, MX-H7-SF, MX-RM6E 5 x 7.6 mm 700 - -
RS Stock No. 660-949
Mfr. Part No.T0051616599
BrandWeller
SGD26.86
Each
units
71 01 01 Needle WP2 0.5 mm - - -
RS Stock No. 914-5708
Mfr. Part No.M7LB127
SGD99.76
Each
units
- Bevel MX-500, MX-5000, MX5200, TMT-9000S-1, TMT-9000S-2 9 mm M - -
RS Stock No. 121-719
Mfr. Part No.SSC-638A
BrandMetcal
SGD35.01
Each
units
SSC Chisel Metcal SP200; OKi MFR-1160 Systems; Metcal SP-HC12 & OKi MFR-H6-SSC Hand-pieces 1.5 x 10 mm SSC-6 30° -
RS Stock No. 860-9438
Mfr. Part No.S75CH006
SGD18.35
Each
units
- Straight Conical MFR-PS1100, MFR-PS2200, SP200, TMT-2000PS 0.6 mm - 30° -
RS Stock No. 914-5705
Mfr. Part No.M7LR400
SGD27.62
Each
units
- Bevel MX-500, MX-5000, MX5200, TMT-9000S-1, TMT-9000S-2 1 mm M 60° -