Audio Transformers

Audio Transformers are transformers designed to be used in the amplifiers and high-frequency audio and voice circuits, for coupling ad impendence matching applications. The transformers allow an AC input signal to produce a related AC output signal without the input and the output being physically connected together. This is accomplished by having two or more coils of insulated wire wound around a magnetic metal core. When the AC signal passes through the input winding, a related AC signal appears on the output winding via the inductive coupling.
Audio Transformers perform several functions:
• They can step up (increase) or step down (decrease) a signal voltage
• They can increase or decrease the impedance of circuit
• Convert the circuit from unbalanced to balanced and from balanced to unbalanced
• Block DC current in a circuit while allowing the AC current flow
• They electrically isolate one audio device from another

There are two main types of transformers:
• Step-up / Step-down transformers – The primary and the secondary coils have a different number of windings, that means they have different impedances. Different impedances cause the signal level changed as it goes through the transformer.
• 1:1 transformers – Each coil has exactly the same number of windings which makes the impedance identical. This transformer doesn’t change the signal level but guarantees the physical electrical insulation between coils. These transformers are usually called Isolation Transformers.

...
Read more Read less

Filters

Viewing 1 - 20 of 147 products
Results per page
Description Price Primary Impedance Secondary Impedance Primary DC Resistance Power Rating Current Rating Secondary DC Resistance Dimensions Mounting Type Termination Type Weight Depth Diameter Length Width
RS Stock No. 210-6475
Mfr. Part No.N35A002F
BrandOEP
SGD31.14
Each
units
4 → 15kΩ 3 → 15Ω 1012Ω 3.5W 40mA 1.5Ω 74 x 41.5 x 36mm Chassis Mount - 250g 36mm - 74mm 41.5mm
RS Stock No. 210-6352
Mfr. Part No.X187B
BrandOEP
SGD107.93
Each
units
600Ω 50kΩ 30.9Ω - - 1520Ω 34 (Dia.) x 31mm Chassis Mount Termination Wire 100g 31mm 34mm - -
RS Stock No. 210-6526
Mfr. Part No.N35A001F
BrandOEP
SGD31.44
Each
units
- 37Ω 10W - 0.5Ω 88 x 50 x 44mm Chassis Mount - 400g 44mm - 88mm 50mm
RS Stock No. 210-6380
Mfr. Part No.R/Z1606
BrandOEP
SGD14.77
Each
units
800Ω 800Ω 109Ω 2mW - 134Ω 18 x 12.7 x 18mm Through Hole - - 18mm - 18mm 12.7mm
RS Stock No. 172-8670
Mfr. Part No.SM-LP-5001E
BrandBourns
SGD2.02
Each (On a Reel of 400)
units
- - - - - - 12.8 x 7.5 x 9mm Surface Mount Solder - 9mm - 12.8mm 7.5mm
RS Stock No. 122-9165
Mfr. Part No.SM-LP-5001E
BrandBourns
SGD3.755
Each (In a Pack of 2)
units
600Ω - 115Ω - - 115Ω 12.8 x 7.5 x 9mm Surface Mount Solder - 9mm - 12.8mm 7.5mm
RS Stock No. 210-6497
Mfr. Part No.B18A001F
BrandOEP
SGD19.76
Each
units
- 320Ω 2W 500mA 0.7Ω 44.5 x 36 x 32.9mm Chassis Mount - 190g 32.9mm - 44.5mm 36mm
RS Stock No. 123-7221
Mfr. Part No.Z1673E
BrandOEP
SGD15.75
Each
units
50Ω 600Ω 10.3Ω 2mW - 150Ω 18 x 18 x 15mm Through Hole PC Pin 14g 15mm - 18mm 18mm
RS Stock No. 210-6532
Mfr. Part No.D29A100
BrandOEP
SGD54.56
Each
units
- 4 → 16Ω 191.5Ω 1 W, 2 W, 5 W, 15 W, 30 W - 0.2Ω 105.5 x 65.5 x 58mm Chassis Mount - 1kg 58mm - 105.5mm 65.5mm
RS Stock No. 123-7237
Mfr. Part No.V78A01F
BrandOEP
SGD114.50
Each
units
5.6kΩ 4 Ω, 8 Ω, 16 Ω 100Ω 25W - 432Ω 100 x 84 x 68.6mm Panel Mount Solder 2kg 68.6mm - 100mm 84mm
RS Stock No. 210-6469
Mfr. Part No.A262CAN
BrandOEP
SGD10.51
Each
units
- - - - - - 29 x 24 x 23mm - - 16g 23mm - 29mm 24mm
RS Stock No. 800-4347
Mfr. Part No.DA101MC
SGD2.52
Each
units
- - - - - - 9.52 x 9 x 6.35mm Surface Mount - 0.9g 6.35mm - 9.52mm 9mm
RS Stock No. 106-8576
Mfr. Part No.DA101MC
SGD2.26
Each (In a Tube of 50)
units
- - - - - - 9.52 x 9 x 6.35mm Surface Mount - 0.9g 6.35mm - 9.52mm 9mm
RS Stock No. 210-6419
Mfr. Part No.A262A2E
BrandOEP
SGD19.60
Each
units
150Ω 600Ω 10.3Ω 100mW Hz @ 300, 1mW Hz @ 30 - 59.5Ω 27.94 x 22 x 22.9mm Through Hole Pin - 22.9mm - 27.94mm 22mm
RS Stock No. 106-8579
Mfr. Part No.DA102C
SGD2.26
Each (In a Tube of 50)
units
- - - - - - 9 x 6.35 x 10.16mm Through Hole - - 10.16mm - 9mm 6.35mm
RS Stock No. 210-6447
Mfr. Part No.A262A7E
BrandOEP
SGD24.39
Each
units
600Ω 600Ω 42Ω 100mW Hz @ 300, 1mW Hz @ 30, 2.5mW Hz @ 50 - 58Ω 28 x 22 x 23.2mm Through Hole Pin - 23.2mm - 28mm 22mm
RS Stock No. 715-6917
Mfr. Part No.DA102C
SGD2.37
Each
units
- - - - - - 9 x 6.35 x 10.16mm Through Hole - - 10.16mm - 9mm 6.35mm
RS Stock No. 667-6076
Mfr. Part No.Z218A2E
BrandOEP
SGD20.04
Each
units
600Ω - 60Ω - - 165Ω 21.5 x 16.3 x 18mm Through Hole - - 18mm - 21.5mm 16.3mm
RS Stock No. 123-7242
Mfr. Part No.R35A03F/4
BrandOEP
SGD76.15
Each
units
5kΩ 8 Ω, 16 Ω 365Ω 3W - 900mΩ 87.3 x 52 x 49.5mm Panel Mount Solder 465g 49.5mm - 87.3mm 52mm
RS Stock No. 715-6914
Mfr. Part No.DA101C
SGD2.42
Each
units
- - - - - - 9 x 6.35 x 10.16mm Through Hole - - 10.16mm - 9mm 6.35mm
Related Products
Z30A11C audio transformers from OEP feature multiple electrostatic ...
Description:
Z30A11C audio transformers from OEP feature multiple electrostatic and magnetic shields and provide galvanic isolation. Z30A11C audio transformers are constructed with a mumetal can. These transformers as ideal as microphone input transformers, for use in low-power output applications and multi-application ...
CUI30 pro audio transformers from OEP feature a ...
Description:
CUI30 pro audio transformers from OEP feature a low profile, encapsulated construction. Suitable for PCB mounting, these transformers can be used as line output transformers or isolating transformers.CUI30A02E (123-7238) has been designed for 70 Ω and 600 Ω applications and ...
D29A09F 10W push-pull audio transformers from OEP are ...
Description:
D29A09F 10W push-pull audio transformers from OEP are constructed with a grain orientated silicon steel core. This core enables reduced distortion and stray magnetic field. These audio output transformers are suitable for use with EL84 valves in push-pull amplifiers and ...
R35A03F pro audio transformers from OEP have a ...
Description:
R35A03F pro audio transformers from OEP have a 12 W maximum output at 50Hz. The use of grain orientated silicon steel for the core material reduces distortion and the stray magnetic field. R35A03F push-pull output transformers are 5k Ω centre ...