Linear Ball Bearings

Linear Ball Bearings are designed to provide a free motion in one direction. These are the most common type of linear slide, offering a smooth precision motion along a single axis linear design. Most commonly used within the furniture industry as a ball bearing drawer slide.
How they work?
Linear Ball Bearings are housed in a linear base, with self-lubrication properties that increase reliability. Most commonly constructed from materials such as aluminium, steel and the ball bearing slides consist of two linear rows of ball bearings contained by four rods and on differing sides of the base. This low friction linear movement can be powered by either a drive mechanism or by hand.
Applications
Ball bearing slide applications include delicate instrumentation, robotic assembly, cabinetry, appliances and clean room environments, which primarily serve the manufacturing industry but also the furniture, electronics and construction industries.

...
Read more Read less

Filters

Viewing 1 - 20 of 167 products
Results per page
Description Price Inner Diameter Linear Ball Bearing Type Base to Centre Height Seals Inside Diameter Outside Diameter Length Dynamic Load Rating Static Load Rating
RS Stock No. 284-8999
Mfr. Part No.LBBR 10
SGD28.23
Each
units
- Closed - Without Seals 10mm 17mm 26mm 585N 415N
RS Stock No. 489-3985
Mfr. Part No.R060230810
SGD40.19
Each
units
- Closed - With Seals 8mm 16mm 25mm 370N 330N
RS Stock No. 489-4067
Mfr. Part No.67122040
SGD55.04
Each
units
- Open - With Seals 20mm 32mm 45mm 2570N 1180N
RS Stock No. 390-6147
Mfr. Part No.LBBR 3-C004
SGD192.23
1 Bag of 4
Bag(s)
- Closed - Without Seals 3mm 7mm 10mm 60N 44N
RS Stock No. 284-9093
Mfr. Part No.LBBR 12-2LS
SGD30.78
Each
units
- Closed - With Seals 12mm 19mm 28mm 695N 510N
RS Stock No. 409-353
Mfr. Part No.R067021240
SGD41.90
Each
units
- Closed - With Seals 12mm 22mm 32mm 1140N 620N
RS Stock No. 341-1504
Mfr. Part No.LBBR8
SGD25.55
Each
units
- Closed - Without Seals 8mm 15mm 24mm 490N 355N
RS Stock No. 423-2251
Mfr. Part No.LBCR 8-2LS
SGD64.85
Each
units
- Closed - Without Seals 8mm 16mm 25mm 490N 355N
RS Stock No. 409-472
Mfr. Part No.R065821240
SGD20.82
Each
units
- Closed - With Seals 12mm 19mm 28mm 870N 620N
RS Stock No. 409-460
Mfr. Part No.R0602 040 10
SGD125.13
Each
units
- Closed - With Seals 40mm 62mm 80mm 5480N 4880N
RS Stock No. 409-476
Mfr. Part No.R065821640
SGD23.49
Each
units
- Closed - With Seals 16mm 24mm 30mm 1120N 730N
RS Stock No. 409-375
Mfr. Part No.R065822540
SGD28.21
Each
units
- Closed - With Seals 25mm 35mm 40mm 2930N 1950N
RS Stock No. 284-9021
Mfr. Part No.LBBR 20
SGD37.67
Each
units
- Closed - Without Seals 20mm 28mm 30mm 1160N 800N
RS Stock No. 284-9037
Mfr. Part No.LBBR 25
SGD43.66
Each
units
- Closed - Without Seals 25mm 35mm 40mm 2120N 1560N
RS Stock No. 489-3979
Mfr. Part No.R060230510
SGD36.81
Each
units
- Closed - With Seals 5mm 12mm 22mm 210N 200N
RS Stock No. 284-9683
Mfr. Part No.LBCD30 D -2LS
SGD157.39
Each
units
- Closed - With Seals 30mm 47mm 68mm 4650N 3250N
RS Stock No. 390-6153
Mfr. Part No.LBBR 4-C004
SGD227.90
1 Bag of 4
Bag(s)
- Closed - Without Seals 4mm 8mm 12mm 75N 60N
RS Stock No. 284-9009
Mfr. Part No.LBBR 12
SGD30.46
Each
units
- Closed - Without Seals 12mm 19mm 28mm 695N 510N
RS Stock No. 409-371
Mfr. Part No.R067021640
SGD50.63
Each
units
- Closed - With Seals 16mm 26mm 36mm 1400N 780N
RS Stock No. 409-426
Mfr. Part No.R065822040
SGD24.11
Each
units
- Closed - With Seals 20mm 28mm 30mm 1410N 900N
Related Products
Shaft support blocks are used to support shafts ...
Description:
Shaft support blocks are used to support shafts and locate the ends of the shaft.They are suitable for all the solid and hollow shafts in this catalogue.They are made from either an aluminium alloy or pressure diecast zinc.Series GWA is ...
LSCS shaft blocks are aluminium alloy extrusions. The ...
Description:
LSCS shaft blocks are aluminium alloy extrusions. The individual block can clamp one shaft end only. The base has two through holes for mounting.
Designed to house ball bushings from 8mm to ...
Description:
Designed to house ball bushings from 8mm to 25mmAluminium constructionDIN 472 circlip fixing required.
The standard Linear Bushing is especially durable due ...
Description:
The standard Linear Bushing is especially durable due to its steel enclosure and is suitable for applications with high contamination, for example the wood working industry. Other typical applications are XY positioning, pick and place applications, foundries, cement works and ...