Potentiometers

What is a potentiometer?



A potentiometer is a variable resistor. Potentiometers enable you to regulate and change the current flowing through a circuit. Potentiometers can also be called pots or potmeters.



Potentiometers have two terminals that are fixed to a resistive element (the track). The resistive element is typically wirewound or made from carbon, cermet or conductive plastic. The third terminal is connected to the wiper, which is a sliding contact. As the wiper moves along the track, the resistance changes and the current flowing through the circuit changes.



Types of potentiometer



Rotary potentiometers are easily controlled by turning a spindle or a knob. Rotary potentiometers can be single turn or multiturn.



Slide potentiometers are also known as slider potentiometers or fader potentiometers. To use a slide potentiometer, it’s simply a case of sliding a fader along a straight track to change the resistance.



Trimmer potentiometers, sometimes called trimpots, are used to calibrate and fine-tune circuits and can be mounted straight onto a PCB (printed circuit board). Trimmer potentiometers are easy to adjust with a screwdriver.



String potentiometers (or string pots) take movement and transform it into an electrical signal.



Membrane potentiometers are completely flat. Membrane potentiometers change their resistance when pressure is applied to the membrane.



Do I need a potentiometer with a linear or logarithmic taper?



The taper you need for your potentiometer depends on the intended application.



For potentiometers with a linear taper, the resistance between one end of the track and the wiper varies at a constant rate. If you turn the potentiometer halfway or slide the fader halfway along the track, the resistance will be half of the total resistance. Linear taper potentiometers are typically used in applications such as light dimmer switches.



For logarithmic taper potentiometers, the resistance does not vary at a constant rate. The level of resistance moves exponentially up or down. A potentiometer that has been turned or moved halfway along its track, will not produce resistance that is half the total resistance. Logarithmic potentiometers are commonly used for audio applications.



What is the difference between a potentiometer and a rheostat?



The key difference is the number of terminals that each device has. Potentiometers have three terminals while rheostats only have two terminals.



Looking for peripherals for your potentiometer?



Potentiometer Knobs

Potentiometer Accessories

Potentiometer Mounting Nuts

...
Read more Read less

Filters

Viewing 21 - 40 of 2132 products
Results per page
Description Price Maximum Resistance Potentiometer Type Number of Turns Number of Gangs Mounting Type Power Rating Shaft Diameter Electrical Taper Mounting Hole Diameter Element Material Termination Style Tolerance Series Shaft Length
RS Stock No. 173-0720
BrandRS PRO
SGD2.221
Each (In a Box of 50)
units
1kΩ - 1 - Panel Mount 1W 6 mm - - Wirewound Solder ±10% P25 25mm
RS Stock No. 173-0761
BrandRS PRO
SGD20.003
Each (In a Box of 50)
units
100Ω - 1 - Panel Mount 1W 6.35 mm - - Wirewound Solder ±10% P25 25mm
RS Stock No. 842-7087
BrandRS PRO
SGD8.06
Each
units
100Ω Rotary 1 1 Panel Mount 1W 6.35 mm Linear - Wirewound Solder ±10% P25 25mm
RS Stock No. 812-847
BrandRS PRO
SGD74.39
Each
units
5kΩ Rotary 1 4 Panel Mount 1.5W 6.35 mm Linear - Wirewound Solder Lug ±10% CLR4000 -
RS Stock No. 842-7037
BrandRS PRO
SGD8.06
Each
units
1kΩ Rotary 1 1 Panel Mount 1W 6 mm Linear - Wirewound Solder ±10% P25 25mm
RS Stock No. 842-7135
BrandRS PRO
SGD10.38
Each
units
2kΩ Rotary 1 1 Panel Mount 0.5W 3.18 mm Linear - Conductive Plastic Solder ±20% P12 19mm
RS Stock No. 173-0733
BrandRS PRO
SGD2.338
Each (In a Box of 50)
units
50Ω - 1 - Panel Mount 1W 6.35 mm - - Wirewound Solder ±10% P25 25mm
RS Stock No. 842-7074
BrandRS PRO
SGD8.06
Each
units
50Ω Rotary 1 1 Panel Mount 1W 6.35 mm Linear - Wirewound Solder ±10% P25 25mm
RS Stock No. 842-7144
BrandRS PRO
SGD20.84
Each
units
100Ω Rotary 1 1 Panel Mount 1W 6.35 mm Linear - Wirewound Solder ±10% P25 25mm
RS Stock No. 170-5318
BrandRS PRO
SGD45.008
Each (In a Box of 100)
units
5kΩ Linear 1 4 Panel Mount 1.5W 6.35 mm Linear - - Solder Lug ±10% CLR4000 -
RS Stock No. 173-0743
BrandRS PRO
SGD6.54
Each (In a Box of 50)
units
2kΩ - 1 - Panel Mount 0.5W 3.17 mm - - Conductive Plastic Solder ±20% P12 19mm
RS Stock No. 842-7078
BrandRS PRO
SGD7.37
Each
units
100Ω Rotary 1 1 Panel Mount 1W 6 mm Linear - Wirewound Solder ±10% P25 25mm
RS Stock No. 173-0725
BrandRS PRO
SGD3.847
Each (In a Box of 50)
units
100Ω - 1 - Panel Mount 1W 6 mm - - Wirewound Solder ±10% P25 25mm
RS Stock No. 170-5321
BrandRS PRO
SGD75.754
Each (In a Box of 100)
units
50kΩ Linear 1 4 Panel Mount 1.5W 6.35 mm Linear - - Solder Lug ±10% CLR4000 -
RS Stock No. 173-0773
BrandRS PRO
SGD113.726
Each (In a Box of 5)
units
10kΩ Linear - - - - 4 mm Linear - Conductive Plastic Solder Tab ±30% 149618 28mm
RS Stock No. 173-0772
BrandRS PRO
SGD119.416
Each (In a Box of 5)
units
10kΩ Linear - - - - 4 mm Linear - Conductive Plastic Solder Tab ±30% 149618 28mm
RS Stock No. 842-7002
BrandRS PRO
SGD8.27
Each
units
10kΩ Rotary 1 1 Panel Mount 1W 6.35 mm Linear - Wirewound Solder ±10% P25 25mm
RS Stock No. 173-0745
BrandRS PRO
SGD4.384
Each (In a Box of 50)
units
25kΩ - 1 - Panel Mount 1W 6 mm - - Wirewound Solder ±10% P25 25mm
RS Stock No. 842-7169
BrandRS PRO
SGD18.64
Each
units
5kΩ Rotary - 1 Panel Mount 2W 8 mm Linear - Conductive Plastic Solder ±20% NP32HS -
RS Stock No. 173-0748
BrandRS PRO
SGD9.155
Each (In a Box of 50)
units
1kΩ Rotary - - Panel Mount 1W 6 mm - - Conductive Plastic Solder ±20% NP21 18mm
Related Products
Panel and PCB mountableSpace saving short body (7.6mm)LightweightFully ...
Description:
Panel and PCB mountableSpace saving short body (7.6mm)LightweightFully insulated body and bush.
This series of RS potentiometers offer a range ...
Description:
This series of RS potentiometers offer a range of resistance options between 100Ω and 10kΩ. They are single turn wirewound potentiometers with a 6mm diameter shaft and a rotational life of 100,000 revolutions. ±10% standard resistance tolerance285° rotation (mechanical angle)3W ...
Brought to you by RS PRO, a series ...
Description:
Brought to you by RS PRO, a series of rotary potentiometers suitable for various applications. Widely used within electronics, each model can be mounted within various devices or even on PCB applications. These particular models generally have a rotational life ...