Aluminium Capacitors

Aluminium capacitors are a type of electrolytic capacitor. A capacitor is a two-terminal electrical component that can store energy, somewhat like a battery. Aluminium capacitors are polarised, meaning that the energy can only flow in a single direction. High purity grade Aluminium is used to create the anode foil and the cathode foil upon which electrolysis is applied to form an extremely thin insulating layer of aluminium oxide, which acts as the dielectric of the capacitor. Aluminium capacitors are found in many applications such as power supplies, computer motherboards and domestic appliances.

Dependent on the nature of the Electrolyte, capacitors may also be referred to as “wet” meaning they have a liquid electrolyte or solid. Solid Electrolytes may be hybridized with Aluminium but normally refers to Polymer or Tantalum based capacitors


Types of Aluminium Capacitors


Aluminium Electrolytic Capacitors


Electrolytic capacitors consist of an electrolyte which is a liquid or gel that consists of a large concentration of ions, and when voltage is applied across its terminals, it leads to charges being stored on the anode and cathode foils. The electric charge that can be stored by the capacitor is measured in Farads but usually in the range from nanofarads to millifarads. .Aluminium capacitors are used where high capacitance values to provide smoothing and filtering functions in the circuit. Commonly used in DC Power supplies due to their large capacitance and their compact size which helps to reduce the ripple voltage. Aluminium Electrolytic capacitors have reasonable Equivalent Series Resistance (ESR) but have the lowest leakage current from all capacitor types.


Polymer Electrolytic Capacitors


Polymer capacitors (also are known as polymer electrolytic capacitors or polymer e caps) have conductive polymer as their electrolyte material within a layered aluminium design. These capacitors combine unique properties from the polymer material in terms of high conductivity, extended temperature range and no risk of drying out – to make a capacitor that offers large capacitance and very low ESR (equivalent series resistance) with high ripple current capability and offer a longer operating life. Polymer capacitors offer a lot of package options between 2.2 to 470 microfarad


Hybrid Capacitors


Hybrid capacitors (polymer hybrid aluminium capacitors) are a mix of wet electrolyte and solid polymer. In this sense, they combine the best of both electrolytes. These capacitors offer high endurance, low ESR, and a high tolerance for ripple current. Hybrid capacitors also feature stable electric characteristics at high frequencies whilst maintaining reliability. The liquid electrolyte keeps the Leakage current very low and also allows self-repairing of the aluminium foils which prevent a drop in capacitance.


...
Read more Read less

Filters

Viewing 61 - 80 of 18162 products
Results per page
Description Price Capacitance Technology Voltage Mounting Type Dimensions Height Length Depth Diameter Minimum Operating Temperature Maximum Operating Temperature Construction Lead Pitch Lifetime
RS Stock No. 170-1248
BrandRS PRO
SGD0.129
Each (In a Bag of 1000)
units
100 µF Electrolytic 50 V dc Through Hole 8 (Dia.) x 11mm 11mm 11mm - 8mm -40°C +105°C - 3.5mm 2000h
RS Stock No. 163-6854
Mfr. Part No.860160673014
SGD0.203
Each (In a Box of 1500)
units
39 µF Electrolytic 50 V dc Through Hole 6.3 (Dia.) x 11mm 11mm - - 6.3mm -55°C +105°C - 2.5mm 3000h
RS Stock No. 875-2585
Mfr. Part No.MAL225646223E3
BrandVishay
SGD10.85
Each
units
22000 µF Electrolytic 25 V dc Through Hole 31 (Dia.) x 32mm 32mm - - 31mm -40°C +105°C - 10mm 2000h
RS Stock No. 526-1294
Mfr. Part No.EEUFM1C152
BrandPanasonic
SGD1.48
Each (In a Pack of 5)
units
1500 µF Electrolytic 16 V dc Through Hole 12.5 (Dia.) x 20mm 20mm - - 12.5mm -40°C +105°C - 5mm 5000h
RS Stock No. 173-0662
Mfr. Part No.MAL225658103E3
BrandVishay
SGD10.227
Each (In a Box of 40)
units
10000 µF Electrolytic 63 V dc Snap-In 36 (Dia.) x 42mm 42mm - - 36mm -40°C +105°C - 10mm 2000h
RS Stock No. 173-3888
Mfr. Part No.MAL225646223E3
BrandVishay
SGD9.645
Each (In a Box of 45)
units
22000 µF Electrolytic 25 V dc Through Hole 31 (Dia.) x 32mm 32mm - - 31mm -40°C +105°C - 10mm 2000h
RS Stock No. 731-5264
BrandRS PRO
SGD3.845
Each (In a Bag of 2)
units
150 µF Electrolytic 400 V dc Through Hole 25 (Dia.) x 35mm 35mm 35mm - 25mm -25°C +105°C - 10mm 2000h
RS Stock No. 171-1152
Mfr. Part No.B43505A5337M
BrandEPCOS
SGD20.344
Each (In a Box of 60)
units
330 µF Electrolytic 450 V dc Snap-In 35 (Dia.) x 50mm 50mm - - 35mm -25°C +105°C - 10mm 5000h
RS Stock No. 711-1441
BrandRS PRO
SGD0.203
Each (In a Pack of 50)
units
100 µF Electrolytic 50 V dc Through Hole 8 (Dia.) x 11mm 11mm 11mm - 8mm -40°C +105°C - 3.5mm 2000h
RS Stock No. 707-6568
BrandRS PRO
SGD5.38
Each (In a Pack of 2)
units
100 µF Electrolytic 250 V dc Through Hole 18 (Dia.) x 36mm 36mm 36mm - 18mm -25°C +105°C - - 1000h
RS Stock No. 771-4747
Mfr. Part No.B41252A9478M000
BrandEPCOS
SGD9.56
Each
units
4700 µF Electrolytic 100 V dc Snap-In 35 (Dia.) x 50mm 50mm - - 35mm -40°C +105°C - 10mm 2000h
RS Stock No. 727-0798
Mfr. Part No.EEEHD1H1R0R
BrandPanasonic
SGD0.363
Each (In a Pack of 25)
units
1 µF Electrolytic 50 V dc Surface Mount 4 (Dia.) x 5.8mm 5.8mm - - 4mm -40°C +105°C - - 5000h
RS Stock No. 850-8445
Mfr. Part No.ULD2W150MHD1TO
BrandNichicon
SGD2.32
Each
units
15 µF Electrolytic 450 V dc Through Hole 12.5 (Dia.) x 20mm - 20mm - 12.5mm -25°C +105°C - 5mm 20000h
RS Stock No. 173-5164
Mfr. Part No.ALS30A222MF400
BrandKEMET
SGD58.863
Each (In a Bag of 16)
units
2200 µF Electrolytic 400 V dc Screw Mount 66 x 105mm 105mm 105mm - 66mm -40°C +85°C - - 19000 h @ +85 °C/400V dc/Ir, 38000 h @ +85 °C/400V dc
RS Stock No. 173-3443
Mfr. Part No.B43508A5107M000
BrandEPCOS
SGD4.82
Each (In a Box of 160)
units
100 µF Electrolytic 450 V dc Snap-In 22 (Dia.) x 30mm - 30mm - 22mm -40°C +105°C - 10mm >200000h
RS Stock No. 475-9009
Mfr. Part No.USR1H010MDD
BrandNichicon
SGD0.31
Each (In a Pack of 5)
units
1 µF Electrolytic 50 V dc Through Hole 4 (Dia.) x 7mm 7mm - - 4mm -40°C +85°C - 1.5mm 2000h
RS Stock No. 173-5149
Mfr. Part No.ALC10C273EL063
BrandKEMET
SGD33.639
Each (In a Bag of 36)
units
27000 µF Electrolytic 63 V dc Snap-In 40 x 80mm 80mm 80mm - 40mm -40°C +85°C - 22.5mm 18000 h @ +85 °C/63V dc/Ir, 29000 h @ +85 °C/63V dc
RS Stock No. 491-0428
Mfr. Part No.UHE1J330MED
BrandNichicon
SGD0.576
Each (In a Pack of 5)
units
33 µF Electrolytic 63 V dc Through Hole 6.3 (Dia.) x 11mm 11mm - - 6.3mm -40°C +105°C - 2.5mm 5000h
RS Stock No. 490-9787
Mfr. Part No.UHE1C102MPD
BrandNichicon
SGD1.042
Each (In a Pack of 5)
units
1000 µF Electrolytic 16 V dc Through Hole 10 (Dia.) x 20mm 20mm - - 10mm -40°C +105°C - 5mm 7000h
RS Stock No. 339-8136
Mfr. Part No.ALC10C273EL063
BrandKEMET
SGD39.24
Each
units
27000 µF Electrolytic 63 V dc Snap-In 40 x 80mm 80mm 80mm - 40mm -40°C +85°C - 22.5mm 18000 h @ +85 °C/63V dc/Ir, 29000 h @ +85 °C/63V dc