Splice Connectors

A splice connector consists of a plastic clip that has a sharp metal insert that will safely cut through the plastic insulating jackets of two wires and crimps them together. Splice Connectors are used to make quick splices or connections with two or more pieces of wire. These splices are normally crimped or soldered so that the power conducted from the source cable to the next cable is transferred at inacceptable conductivity and pull-out resistance performance level.


Types of splice connectors:


  • Crimp Butt Splice Terminal

  • Crimp Closed End Terminal

  • Crimp Barrel Foil Terminal

  • Push Wire Terminal

 


Frequently asked Questions


What are Crimp Butt Splice Terminals


Crimp butt splice terminals are tube-shaped connectors with two crimps for joining wires in-line. They typically consist of a metal tube that's usually encased in an insulated covering. Crimp butt splice terminals can be used to either change, lengthen or repair conductors in an electrical circuit.


How Do Crimp Butt Splice Terminals Work ?


Crimp butt splice terminals are attached by inserting the stripped ends of two stranded wires into both ends of the terminal. A crimping tool is then used to crimp both ends to ensure a tight connection between the wires.


What are Crimp Closed-End Connectors used for?


Crimp closed-end connectors are used to terminate wires as well as seal them from oxygen and moisture, which would otherwise cause corrosion. Terminators in electronic transmission lines prevent reflections that would occur at unterminated transmission lines, which can lead to distortions like video ghosting in analogue signal systems.


Crimp closed-end connectors come in a wide range of fixed sizes for wires of different diameters. There also are adjustable ones that provide more flexibility.


...
Read more Read less

Filters

Viewing 81 - 100 of 957 products
Results per page
Description Price Splice Type Minimum Wire Size mm² Wire Size Maximum Wire Size mm² Overall Length Diameter Minimum Wire Size AWG Insulation Maximum Wire Size AWG Number of Ways Colour Contact Dimensions Insulation Material Contact Length
RS Stock No. 178-7210
BrandRS PRO
SGD0.209
Each (In a Bag of 100)
units
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 26mm 4.5mm 22AWG Insulated 16AWG - Red - Nylon -
RS Stock No. 178-7219
BrandRS PRO
SGD0.137
Each (In a Bag of 100)
units
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 25.2mm 4mm 22AWG Insulated 16AWG - Red - Nylon -
RS Stock No. 178-7223
BrandRS PRO
SGD0.178
Each (In a Bag of 100)
units
- 4mm² 12 → 10 AWG, 4 → 6 mm² 6mm² 26.5mm 6.3mm 12AWG Insulated 10AWG - Yellow - Vinyl -
RS Stock No. 178-7232
BrandRS PRO
SGD0.066
Each (In a Bag of 100)
units
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 21mm 8mm 22AWG Insulated 16AWG - Natural - Nylon -
RS Stock No. 841-7689
BrandRS PRO
SGD0.856
Each (In a Pack of 50)
units
Butt - 35 mm² - 40mm 11mm - Uninsulated - - - - - -
RS Stock No. 458-0702
BrandRS PRO
SGD1.202
Each (In a Bag of 10)
units
- - - - - - - Insulated - - - - - -
RS Stock No. 178-7211
BrandRS PRO
SGD0.272
Each (In a Bag of 100)
units
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 26mm 4.5mm 22AWG Insulated 16AWG - Red - Nylon -
RS Stock No. 178-7213
BrandRS PRO
SGD0.321
Each (In a Bag of 100)
units
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 27mm 5.2mm 16AWG Insulated 14AWG - Blue - Nylon -
RS Stock No. 178-7221
BrandRS PRO
SGD0.103
Each (In a Bag of 100)
units
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 24.6mm 4mm 22AWG Insulated 16AWG - Red - Vinyl -
RS Stock No. 178-7204
BrandRS PRO
SGD0.106
Each (In a Bag of 100)
units
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 27.3mm 3.2mm 22AWG Insulated 16AWG - Red - Nylon -
RS Stock No. 178-7218
BrandRS PRO
SGD0.287
Each (In a Bag of 100)
units
- 4mm² 12 → 10 AWG, 4 → 6 mm² 6mm² 27.3mm 5.3mm 12AWG Insulated 10AWG - Yellow - Nylon -
RS Stock No. 178-7185
BrandRS PRO
SGD1.272
Each (In a Bag of 50)
units
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 36mm 2.3mm 16AWG Insulated 14AWG - Blue - Nylon -
RS Stock No. 178-8395
BrandRS PRO
SGD0.062
Each (In a Bag of 100)
units
- - 1.25 mm², 22 → 16 AWG 1.25mm² 15.2mm 6mm 22AWG Insulated 16AWG - Natural - Nylon -
RS Stock No. 510-8755
BrandRS PRO
SGD7.60
1 Bag of 50
Bag(s)
Tap 0.75mm² 18 → 14 AWG 2.5mm² 27mm 20mm 18AWG Insulated 14AWG - White - PP -
RS Stock No. 178-7227
BrandRS PRO
SGD0.195
Each (In a Bag of 100)
units
- 4mm² 12 → 10 AWG, 4 → 6 mm² 6mm² 26.5mm 6.3mm 12AWG Insulated 10AWG - Yellow - Vinyl -
RS Stock No. 178-7216
BrandRS PRO
SGD0.083
Each (In a Bag of 100)
units
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 25.2mm 4mm 22AWG Insulated 16AWG - Red - Nylon -
RS Stock No. 178-7184
BrandRS PRO
SGD1.076
Each (In a Bag of 50)
units
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 36mm 1.7mm 22AWG Insulated 16AWG - Red - Nylon -
RS Stock No. 809-2385
BrandRS PRO
SGD0.612
Each (In a Pack of 50)
units
Butt - 8 AWG 8mm² 21mm 7mm - Uninsulated 8AWG - - - - -
RS Stock No. 178-7205
BrandRS PRO
SGD0.123
Each (In a Bag of 100)
units
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 27.3mm 3.8mm 16AWG Insulated 14AWG - Blue - Nylon -
RS Stock No. 178-7178
BrandRS PRO
SGD0.072
Each (In a Bag of 100)
units
- 0.5mm² - 0.75mm² - - 22AWG Uninsulated 18AWG - - 19 x 6.5mm - 19mm
Related Products
This range of funnel entry terminals guarantees total ...
Description:
This range of funnel entry terminals guarantees total insertion of the conductor strands into the terminal barrel. Red 0.5 - 1.5 mm²Blue 1.5 - 2.5 mm²Yellow 4.0 - 6.0 mm².
Insulated crimp spade terminals made from tin plated ...
Description:
Insulated crimp spade terminals made from tin plated copper with conically tapered halogen free plastic insulation sleeves. These insulated crimp spade terminals feature the 'EASY ENTRY' system. Insulated versions are halogen-free and feature "EASY ENTRY" technologyContact material: Copper silver plated. ...
a range of power tap connectors for wire ...
Description:
a range of power tap connectors for wire to board connection using ACTION PIN post high current contacts. These power taps are suitable for use with a PCB thickness of 1.57 to 3.18mm.Stock number 717-6595 is a 25A,10 way insulated, ...
Panduit PCSB range of multi-tap connectors have a ...
Description:
Panduit PCSB range of multi-tap connectors have a flexible design and can be used as a tap, splice or dead end connector. The body of the tap is made from a high strength extruded aluminium alloy to provide premium electrical ...