Linear Motion

We offer a great range of linear slides, linear guides & positioning tables for any power transmission requirement. We work closely with industry-leading brands like igus, Bosch Rexroth, THK, IKO Nippon Thmpson and NSK so you have an expert selection of cylinder guides, slide assemblies, guide wheels and slewing rings. You can also choose from a full range of accessories including socket tools, T-Nuts and combination plates.

What is power transmission?

Power transmission, or specifically mechanical power transmission in this case, are the components used in an industrial system with moving parts, as opposed to those that are powered by electricity.

What types of mechanical power transmission options are available?

The following types are available:

  • Cylinder Guides: pneumatic devices for generating motion in various ways
  • Linear Guides
  • Assemblies: a load bearing mechanism that also guides the load in a straight line
  • Guide blocks: the carriage that slides along the assembly
  • Rails: the beam along which carriage slides along
  • Linear Slides
  • Assemblies: for precise linear rolling motion along guideways
  • Cap wipers: these lubricate contact surfaces, remove debris and improve operational safety
  • Carriage plates: a flush surface for mounting your components and for attaching t-nuts with grooves for drifting
  • Flange clamps: these enable slides to become self-supporting beams
  • Guide wheels: ball bearing based wheels allowing precision linear motion
  • Slewing rings: these are slow turning rotating rings containing bearings
  • Rails: allow for powered or manual mechanism motion in a linear direction
  • T-Nuts: these secure fixings for your components
  • Track Rollers: these are concentric and eccentric adjusting roller wheels for a spacer slide
  • Adapter Bushings: are used for mounting guide wheels, in concentric and eccentric varieties
  • Positioning Cables
  • Clamping strips: used for attaching existing and additional equipment
  • Combination plates: are securing attachments which can be drilled
  • Angles: for 45° and 90° angular component clamping
Flat Cage Assemblies
Flat Cage Assemblies
Guide Wheels
Guide Wheels
Linear Bearing Units
Linear Bearing Units
Linear Bearings
Linear Bearings
Linear Guide Blocks
Linear Guide Blocks
Linear Guide Rails
Linear Guide Rails
Linear Guides
Linear Guides
Linear Shaft Supports
Linear Shaft Supports
Linear Shafts
Linear Shafts
Linear Slide Accessories
Linear Slide Accessories
Linear Slide Rails
Linear Slide Rails
Linear Slides
Linear Slides
Positioning Tables
Positioning Tables
Slewing Rings
Slewing Rings

2059 Products showing for Linear Motion

1 of 103
Temporarily out of stock
Bosch Rexroth Bearing Unit R103561020 R1035 Series
  • RS Stock No. 409-444
  • Mfr. Part No. R103561020
Subtotal (1 unit)
SGD190.02(exc. GST)
In Stock
RS PRO Guide Block MGN Series, 4610 N Dynamic Load
  • RS Stock No. 176-6676
Subtotal (1 unit)
SGD97.38(exc. GST)
Temporarily out of stock
Igus RJUM-01-25 Bearing with 25 mm ID 40 mm OD 3625 N 25375 N
  • RS Stock No. 311-3496
  • Mfr. Part No. RJUM-01-25
Subtotal (1 unit)
SGD53.80(exc. GST)
Temporarily out of stock
INA Linear Shaft Support 2-Bolt Base Linear Ball Bearing Block 35 mm, GW12 12 mm 42 mm
  • RS Stock No. 194-6931
  • Mfr. Part No. GW12
Subtotal (1 unit)
SGD34.90(exc. GST)
In Stock
Igus T Series, TS-04-15-1000, Linear Guide Rail 15 mm width 1000 mm Length
  • RS Stock No. 488-5091
  • Mfr. Part No. TS-04-15-1000
Subtotal (1 unit)
SGD110.02(exc. GST)
In Stock
INA Linear Shaft Support 2-Bolt Base Linear Ball Bearing Block 50 mm, GWA20 20 mm 60 mm
  • RS Stock No. 172-1202
  • Mfr. Part No. GWA20
Subtotal (1 unit)
SGD60.51(exc. GST)
In Stock
RS PRO EG Series, Linear Guide Rail 15 mm width 300 mm Length
  • RS Stock No. 345-425
Subtotal (1 unit)
SGD89.14(exc. GST)
In Stock
RS PRO MGN Series, Linear Guide Rail 5 mm width 45 mm Length
  • RS Stock No. 176-6656
Subtotal (1 unit)
SGD44.27(exc. GST)
In Stock
Bosch Rexroth R065822540 Bearing with 35 mm OD
  • RS Stock No. 409-375
  • Mfr. Part No. R065822540
Subtotal (1 unit)
SGD45.97(exc. GST)
In Stock
Ewellix Makers in Motion LBBR 10-2LS/HV6 Bearing with 10 mm ID 17 mm OD 585 N 415 N
  • RS Stock No. 284-9251
  • Mfr. Part No. LBBR 10-2LS/HV6
Subtotal (1 unit)
SGD39.90(exc. GST)
In Stock
Igus SAM-20 Bearing with 20.2 mm ID 44 mm OD 11000 N
  • RS Stock No. 712-5020
  • Mfr. Part No. SAM-20
Subtotal (1 unit)
SGD12.61(exc. GST)
In Stock
Bosch Rexroth R060202510 Bearing with 40 mm OD
  • RS Stock No. 489-4023
  • Mfr. Part No. R060202510
Subtotal (1 unit)
SGD121.34(exc. GST)
In Stock
Igus RJUM-01-12 Bearing with 12 mm ID 22 mm OD 960 N 6720 N
  • RS Stock No. 311-3468
  • Mfr. Part No. RJUM-01-12
Subtotal (1 unit)
SGD28.22(exc. GST)
In Stock
IKO Nippon Thompson Slewing Ring with 210 mm OD
  • RS Stock No. 175-3617
  • Mfr. Part No. CRBFV9025ATUUC1
Subtotal (1 unit)
SGD1,321.28(exc. GST)
In Stock
RS PRO H G Series, Linear Guide Rail 23 mm width 640 mm Length
  • RS Stock No. 176-6697
Subtotal (1 unit)
SGD223.58(exc. GST)
In Stock
NSK Linear Guide Carriage PAU12TRS Polyurethane Series, 2.83 kN Dynamic Load
  • RS Stock No. 619-2509
  • Mfr. Part No. PAU12TRS
Subtotal (1 unit)
SGD102.17(exc. GST)
Temporarily out of stock
IKO Nippon Thompson, BWU17-20 Stainless Steel Linear Slides, 14 mm Stroke Length
  • RS Stock No. 199-9779
  • Mfr. Part No. BWU17-20
Subtotal (1 unit)
SGD147.62(exc. GST)
In Stock
THK HSR20-220L(GK) Series, HSR20-220L(GK), Linear Guide Rail 20 mm width 220 mm Length
  • RS Stock No. 211-5235
  • Mfr. Part No. HSR20-220L(GK)
Subtotal (1 unit)
SGD126.07(exc. GST)
In Stock
INA Linear Guide Carriage KWVE20-B-V1-G3 KWVE20 Series, 13100 N Dynamic Load
  • RS Stock No. 172-1056
  • Mfr. Part No. KWVE20-B-V1-G3
Subtotal (1 unit)
SGD242.76(exc. GST)
In Stock
IKO Nippon Thompson Linear Guide Carriage ML15C1HS2 ML Series, 4980 N Dynamic Load
  • RS Stock No. 175-3633
  • Mfr. Part No. ML15C1HS2
Subtotal (1 unit)
SGD106.09(exc. GST)
1
2
3
103
Results per page

Related links