Battery Holders

What is it?
A battery holder is a cavity or compartment used to house one or more batteries in a piece of equipment safely. The battery holder has flat metal or spring coiled contacts that press against the battery terminals making an electrical contact.
What does it do?
A battery holder provides a convenient method of containing the cells neatly in a casing. The holder or mount is moulded into the shape of the battery it houses.
Types
Battery holders are available in various shapes, styles and materials. The main ones are:
Chassis mount
Chassis mount battery holders can be made of metal or plastic. They are fixed to a panel, chassis or plate via fixing holes in the back of the casing base or by tabs at the side. The holders can be open faced or enclosed. Chassis mount holders and mounts accept AA, AAA, C, D AA and 9 V PP3 cell sizes.
Panel mount
Panel mount battery holders are made of plastic. They are designed to slot into a pre-prepared hole in a panel. There are two main fixing methods,
• Flange panel fixing
Secured to the panel via a flange with pre-drilled holes. These holders are draw style holders with a flip front or pull out draw compartment. They hold single larger cells like 9 V PP3 or multiple 2, 3 and 4 cylindrical AAA, AA, C and D cells.
• Screw fixing
Secured to the panel with screw thread gasket and nut. These holders are long cylindrical holders with a cap. The cap can be finger operated or slotted cap (for screwdriver release).
PCB Mount
PCB mount battery holders can be made of metal or plastic. They are designed to mount directly on to a printed circuit board. The holders have sharp pins protruding from the base of the holder. Pins are pushed through the holes on a PCB board and soldered. These battery mounts are usually open faced. PCB holders can hold single coin cells or multiple 2, 3 and 4 cylindrical AAA, AA, C, D cells
Strap and lead
Strap and lead types are a battery connector rather than a holder or mount. They are two press studs fixed into a plastic flat base. The base has two short lengths of flexible wire with tinned ends for connection. Strap and lead styles are used with 9 V PP3 cells.

...
Read more Read less

Filters

Viewing 1 - 20 of 348 products
Results per page
Description Price For Battery Size Number of Cells Mount Type Maximum Cell Diameter Dimensions Terminal Contact Type Body Material Terminal Contact Material
RS Stock No. 594-628
BrandRS PRO
SGD1.74
Each
units
AA 4 Chassis Battery Holder - 57 x 30 x 30mm Coil Spring PP -
RS Stock No. 512-3552
BrandRS PRO
SGD1.66
Each
units
AAA 2 Chassis Battery Holder - 52.3 x 24.7 x 13mm Coil Spring PP -
RS Stock No. 594-432
BrandRS PRO
SGD1.78
Each
units
AA 4 Chassis Battery Holder - 115 x 27 x 17mm Coil Spring PP Nickel Plated Steel
RS Stock No. 500-4855
Mfr. Part No.CR123A-R
SGD4.37
Each
units
CR123A - Chassis Battery Holder - - Leaf Spring - -
RS Stock No. 611-9576
BrandRS PRO
SGD0.71
Each
units
AA 1 PCB Battery Holder - 57.2 x 16.4 x 14.8mm Coil Spring PP Nickel Plated Steel
RS Stock No. 594-426
BrandRS PRO
SGD10.04
Each
units
D 4 Chassis Battery Holder - 149 x 71 x 28mm Coil Spring PP Nickel Plated Steel
RS Stock No. 219-7926
Mfr. Part No.3000
BrandKeystone
SGD0.796
Each (In a Pack of 5)
units
CR1216, CR1220 1 PCB Contact 12mm - Top Spring Arm - Phosphor Bronze
RS Stock No. 611-9605
BrandRS PRO
SGD1.02
Each
units
AA 4 PCB Battery Holder - 58 x 31 x 28mm Coil Spring PP Nickel Plated Steel
RS Stock No. 611-9598
BrandRS PRO
SGD0.84
Each
units
AA 2 PCB Battery Holder - 57.6 x 31.2 x 15mm Coil Spring PP Nickel Plated Steel
RS Stock No. 410-1450
Mfr. Part No.2490
BrandKeystone
SGD2.21
Each (In a Pack of 3)
units
AA 2 Chassis Battery Holder - 68.3 x 35.4 x 18mm Coil Spring ABS Spring Steel
RS Stock No. 219-7960
Mfr. Part No.3003
BrandKeystone
SGD1.436
Each (In a Pack of 5)
units
CR2016, CR2025, CR2032 1 PCB Contact 20mm 19.9 x 21.1 x 6.7mm Top Spring Arm - Phosphor Bronze
RS Stock No. 401-9878
Mfr. Part No.MD-4G
SGD5.97
Each
units
AA 4 - Battery Holder - 19 x 65 x 72.5mm Press Stud ABS Nickel Plated Brass
RS Stock No. 172-6012
Mfr. Part No.92
BrandKeystone
SGD0.404
Each (In a Pack of 10)
units
AA 1 PCB Clip - 9.5 x 15.1mm Button - Spring Steel
RS Stock No. 512-3580
BrandRS PRO
SGD1.54
Each
units
AA 2 Chassis Battery Holder - 57.6 x 31.2 x 15mm Coil Spring PE -
RS Stock No. 410-1444
Mfr. Part No.2487
BrandKeystone
SGD3.38
Each (In a Pack of 3)
units
AA 3 Chassis Battery Holder - 68.5 x 48 x 18.5mm Coil Spring ABS Spring Steel
RS Stock No. 593-704
Mfr. Part No.BX0023
BrandBulgin
SGD11.25
Each
units
9V PP3 1 Panel Battery Holder - 54 x 34.5 x 24.5mm Solder Tag Glass Filled Nylon Phosphor Bronze
RS Stock No. 500-4849
Mfr. Part No.CR123A-PC
SGD3.38
Each
units
CR123A 1 PCB Battery Holder - - Leaf Spring - -
RS Stock No. 481-4077
Mfr. Part No.2464RB
BrandKeystone
SGD5.53
Each
units
AA 3 PCB Battery Holder - 58 x 48.3 x 17mm Coil Spring PP Spring Steel
RS Stock No. 614-2374
Mfr. Part No.2481
BrandKeystone
SGD2.71
Each
units
AAA 4 PCB Battery Holder - 53 x 50.3 x 13mm Coil Spring PP Spring Steel
RS Stock No. 593-710
Mfr. Part No.BX0026
BrandBulgin
SGD24.00
Each
units
9V PP3 2 Panel Battery Holder - 54 x 67.3 x 24.5mm Solder Tag Glass Filled Nylon Phosphor Bronze
Related Products
Single cell PCB mounting battery holders20A nickel silver ...
Description:
Single cell PCB mounting battery holders20A nickel silver rated contacts (spring steel for 1/2 AA) solder tags, 5A PCB pinsPins can be cropped and the 110 connectors on the top can be usedInterconnecting lugs allow multiple assemblies.
The Bulgin battery holder is manufactured from high-quality ...
Description:
The Bulgin battery holder is manufactured from high-quality moulding and metal components to ensure a secure and reliable connection. It is a PCB mount battery holder with a holding capacity of single C cells. This holder has 59.1mm x 30.2mm ...
Robust but lightweight constructionInsulated terminalsSingle and multiple configurationsNickel ...
Description:
Robust but lightweight constructionInsulated terminalsSingle and multiple configurationsNickel plated brass tags for ease of soldering.
Intended mainly to hold lithium batteries used for ...
Description:
Intended mainly to hold lithium batteries used for memory back-up."Snap-in" type contacts make it easy to hold during wave soldering.Identification of polarity and locating pin for direction of fitting.Low profile for space saving.Option of adding a side cover 1029C or ...