John Drummond MTL20/B Voltage Indicator CAT III 1000V, CAT IV 600V

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): PH
Product Details

Drummond Test Lamp MTL20B

The MTL20B incorporates two test buttons, one on the body of the unit and one on the probe. Simultaneous depression of both buttons enables the unit to draw a high current, allowing the user to differentiate between phantom voltages and hazardous persistent voltages. The MTL20B has a blue LED light that comes on when detecting voltages over 310 volts.

Maximum Working Voltage: 500V AC, 750V DC
Voltage Ranges: 50, 100, 200, 400V AC / DC
Range Detection: Automatic
Response Time: <0.1s
Frequency Range: DC, 0-65Hz
Test Current (500V AC / DC): Switches not Operated: <3.5mA, Switches Depressed: 28mA à 240V AC, 60mA à 500V AC
Blue LED on 400V threshold
Pollution Degree: 2
Protection Degree: IP64

Standards

CAT IV 600V, CAT III 1000V

Supplied with

Right angled probe tip, two straight tips and instructions.

Mains Voltage Indicators - Contact

Specifications
Attribute Value
Maximum Voltage 750V
Safety Category CAT III 1000V, CAT IV 600V
IP Rating IP64
Power Source Mains
Dimensions 213 x 112 x 72mm
Weight 350g
Height 72mm
Length 213mm
Maximum Operating Temperature +55°C
Width 112mm
Safety Category Voltage 600 (CAT IV) V, 1000 (CAT III) V
Model Number p MTL20/B
Safety Category Level CAT III, CAT IV
Minimum Operating Temperature -10°C
10 In stock for delivery within 3 working days
Price Each
SGD 152.35
(exc. GST)
SGD 163.01
(inc. GST)
units
Per unit
1 +
SGD152.35
Related Products
The Fluke 345 measures a wide range of ...
Description:
The Fluke 345 measures a wide range of electrical parameters for troubleshooting power disturbances in single- and three phase electrical loads. With a bright colour display to see waveforms and trends, a low-pass filter to remove high frequency noise, and ...
RS Pro VP-3 Volt Stick is a pen ...
Description:
RS Pro VP-3 Volt Stick is a pen style non-contact AC voltage indicator. Safely checks the presence of an AC voltage in cables, wall sockets, fuses and junction boxes. No current flow is needed for correct operation. An essential tool ...
The Non-Contact VoltStick® is a tester for safely ...
Description:
The Non-Contact VoltStick® is a tester for safely checking the presence of an AC voltage without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes etc. No current flow is needed for correct detection. Apply the plastic ...
The Megger VF3 voltage detector resembles a small ...
Description:
The Megger VF3 voltage detector resembles a small pen like instrument. It is used to identify the presence of live AC voltages of socket outlets, switches, circuit breakers, fuses, luminaries, wires and cables ranging from 60V to 90V at 50Hz ...