Monitran Mounting Adaptor

  • RS Stock No. 533-2273
  • Mfr. Part No. MTN/MS002
  • Manufacturer Monitran
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

MTN1185 Series 4-20mA Accelerometer

Used for air handling units, building services, fans
4-20mA output for PLC interface
Output proportional to RMS velocity (mm/s)
Available with 0-10mm/s (533-2368) or 0-25mm/s (533-2374) velocity ranges
Frequency from 2 Hz to 1 kHz
Dynamic range: 50 g peak
5 meter armoured PTFE cable
IP 67 Stainless Steel body Case
To use with Glue or M8 Mounting stud
Dimensions (DxL): 27 x 43 mm

Approvals

EEx ia lic BAS02ATEX1057/3

Accelerometers

Vibration sensors use solid-state piezoelectric accelerometers to detect the level of vibration in rotating elements like bearings and gearboxes on machinery such as motors, generators, pumps, fans and compressors. Regular vibration measurements on all critical machines as part of the maintenance regime can detect early signs of failure and provide a way to eliminate these problems. Bearing wear, poor balance and loose mounting all lead to the failure of rotating machinery. Unexpected machinery failure leads to unplanned maintenance costs, loss of production plus potential Health and Safety hazards. They are rugged, adaptable to all types of machinery and conditions including operation in hazardous areas, easy to install and require no maintenance. Used in conjunction with off- and on-line vibration analysers they yield valuable diagnostic information on the machinery's condition and reveal where and when failure may occur allowing pre-emptive maintenance intervention. The dc (velocity) outputs integrate this complex signal into a simple dc signal of 4-20mA proportional to the overall vibration of the machine, ideal for monitoring with all types of industrial controllers.

21 In stock for delivery within 3 working days
Price Each
SGD 15.86
(exc. GST)
SGD 16.97
(inc. GST)
units
Per unit
1 - 9
SGD15.86
10 - 49
SGD15.26
50 +
SGD14.89
Related Products
TE Connectivity’s MEAS piezoelectric film sensors are constructed ...
Description:
TE Connectivity’s MEAS piezoelectric film sensors are constructed from silver ink screen printed electrodes on rectangular piezo film. Piezo vibration sensors without a lead can be adhered directly to a surface using epoxy resin or double sided tape, and leads ...
Glass and metal bodied versions offer bounce-free switching ...
Description:
Glass and metal bodied versions offer bounce-free switching and quick break action even when tilted slowly. Contacts make and break with vibration motion and return to the open state at rest. Unless otherwise stated, the angle by which the switch ...
Normally open contact acceleration switches used to detect ...
Description:
Normally open contact acceleration switches used to detect sudden changes in velocitySteel gold plated caseChoice of activation levels: 2G (455-3665), 5G (289-7935), 10G (455-3643)Dimensions: Length 18mm (inc. pins) Body Dia. 4.6mm.
Fully-electric vibration sensorThis innovative Seismic sensor detects break-in ...
Description:
Fully-electric vibration sensorThis innovative Seismic sensor detects break-in attempts through prying, penetration, impact etc. using typical impact sound signalsPatented frequency analysis detects the difference between simple knocking, external vibrations and similar frequencies that typically occur during a ...