FTDI Chip FT233HPQ-TRAY, USB Controller, 12Mbps, USB 2.0, 3.3 V, 64-Pin QFN 64
- RS Stock No.:
- 228-3124
- Mfr. Part No.:
- FT233HPQ-TRAY
- Manufacturer:
- FTDI Chip
260 In stock for delivery within 4 working days
Added
Price Each (In a Tray of 260)
SGD9.937
(exc. GST)
SGD10.831
(inc. GST)
| Units | Per unit | Per Tray* |
| 260 + | SGD9.937 | SGD2,583.62 |
| *price indicative | ||
- RS Stock No.:
- 228-3124
- Mfr. Part No.:
- FT233HPQ-TRAY
- Manufacturer:
- FTDI Chip
Legislation and Compliance
Product Details
The FTDI Chip FT233HP/FT232HP is a Hi-Speed USB device with Type-C/PD 3.0 controller IC that fully supports the latest USB Type-C and Power Delivery (PD) standards enabling support for power negotiation with the ability to sink or source current to a USB host device. The USB bridge function delivers 1 independent channel compatible with the FT232H – Single Hi-speed USB to multipurpose UART/FIFO solution.
Supports PD Specification 3.0.
1 x USB PD 3.0 Port supports Dual Role Swap Function
Supports 5V3A, 9V3A, 12V3A, 15V3A, 20V3A and more PDOs as sink or source.
Type-C/PD Physical Layer Protocol.
PD policy engine using 32-bit RISC controller with 8kB data RAM and 48kB code ROM.
PD mode configuration through external EEPROM.
Options to use external MCU controlling PD policy through I2C interface.
Up to 8 Configurable PD GPIO pins support.
External MCU support through I2C bus.
1 x USB PD 3.0 Port supports Dual Role Swap Function
Supports 5V3A, 9V3A, 12V3A, 15V3A, 20V3A and more PDOs as sink or source.
Type-C/PD Physical Layer Protocol.
PD policy engine using 32-bit RISC controller with 8kB data RAM and 48kB code ROM.
PD mode configuration through external EEPROM.
Options to use external MCU controlling PD policy through I2C interface.
Up to 8 Configurable PD GPIO pins support.
External MCU support through I2C bus.
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.
Specifications
Attribute | Value |
|---|---|
| Number of Transceivers | 1 |
| Data Rate | 12Mbps |
| Protocols Supported | USB 2.0 |
| IC Type | Controller IC |
| Power Supply Type | Single |
| ESD Protection | Yes |
| Typical Single Supply Voltage | 3.3 V |
| Package Type | QFN 64 |
| Pin Count | 64 |